Dell PowerVault 200S Manuel utilisateur













____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Computer

Corporation is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, PowerEdge, and PowerVault are trademarks of

Dell Computer Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell Computer Corporation disclaims any propri-

etary interest in trademarks and trade names other than its own.

November 1999 P/N 1251U Rev. A02

iii



Use the following safety guidelines to ensure your own personal safety and to help

protect your computer or storage system from potential damage.



Throughout this guide, blocks of text may be accompanied by an icon and printed in

bold type or in italic type. These blocks are notes, notices, cautions, and warnings,

and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of

your computer system.





  !"

"#

$%&$%&!"

"#



Observe the following caution and warnings while servicing this system:

 '

%()

*

+

$%&

!"

!



*,-*,./0



$%&

11")



 !"#$% &'()

*+,+% -* ,.'%*+%/!*.0#.1 &2%'/*+$+%

!30!*"04*+..0!#+'2$ !"#% &'(

*.%02*1314

1113"311

131"3

.% 055#5#5511#05)

1615116

111##5#5



 !"#$%&$'

(#) $#* "

"$)'

5657+89+:#+7#0% &', +' + (;&

,+#,8*,%!* 7+ !*<01!*,0 !* 9<'.&%*9 #<.

9,%+% &', +' + !9+&80=<,!*,,!*,,%'>$+% 

&=.>+(

*.%027*83

9311913)

339

.%&*151611

91516611

6116



To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions.



Observe the following general precautions for using and working with your system:

Observe and follow service markings. Do not service any Dell product except as

explained in your Dell system documentation. Opening or removing covers that

are marked with the triangular symbol with a lightning bolt may expose you to

electrical shock. Components inside these compartments should be serviced

only by a Dell authorized service technician.

If any of the following conditions occur, unplug the product from the electrical

outlet and replace the part or contact your Dell authorized service provider:

— The power cable, extension cord, or plug is damaged.

— An object has fallen into the product.

— The product has been exposed to water.

— The product has been dropped or damaged.

— The product does not operate correctly when you follow the operating

instructions.

Keep your system components away from radiators and heat sources. Also, do

not block cooling vents.

Do not spill food or liquids on your system components, and never operate the

product in a wet environment. If the computer gets wet, see the appropriate

chapter in your troubleshooting guide or contact a Dell-authorized service

provider.

Do not push any objects into the openings of your system components. Doing so

can cause fire or electric shock by shorting out interior components.

Use the product only with Dell products or other Dell-approved equipment.

Allow the product to cool before removing covers or touching internal

components.

Use the correct external power source. Operate the product only from the type

of power source indicated on the electrical ratings label. If you are not sure of the

type of power source required, consult your Dell service provider or local power

company.

To help avoid damaging your system components, be sure the voltage selection

switch (if provided) on the power supply is set to match the power available at

your location:

— 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far

Eastern countries such as South Korea and Taiwan

— 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan

— 230 V/50 Hz in most of Europe, the Middle East, and the Far East

Also be sure that your monitor and attached devices are electrically rated to oper-

ate with the power available in your location.

Use only approved power cable(s). If you have not been provided with a power

cable for your computer or storage system or for any AC-powered option

intended for your system, purchase a power cable that is approved for use in your

country. The power cable must be rated for the product and for the voltage and

current marked on the product’s electrical ratings label. The voltage and current

rating of the cable should be greater than the ratings marked on the product.

To help prevent electric shock, plug the system components and peripheral

power cables into properly grounded electrical outlets. These cables are

equipped with three-prong plugs to help ensure proper grounding. Do not use

adapter plugs or remove the grounding prong from a cable. If you must use an

extension cord, use a three-wire cord with properly grounded plugs.

Observe extension cord and power strip ratings. Make sure that the total ampere

rating of all products plugged into the extension cord or power strip does not

exceed 80 percent of the extension cord or power strip ampere ratings limit.

Do not use appliance/voltage converters or kits sold for appliances with your Dell

product.

To help protect your system components from sudden, transient increases and

decreases in electrical power, use a surge suppressor, line conditioner, or un-

interruptible power supply (UPS).

Position cables and power cords carefully; route cables and the power cord and

plug so that they cannot be stepped on or tripped over. Be sure that nothing rests

on your system components’cables or power cord.

Do not modify power cables or plugs. Consult a licensed electrician or your

power company for site modifications. Always follow your local/national wiring

rules.

To help avoid possible damage to the system board, wait 5 seconds after turning

off the system before removing a component from the system board or discon-

necting a peripheral device from the computer.

Handle batteries carefully. Do not disassemble, crush, puncture, short external

contacts, dispose of in fire or water, or expose batteries to temperatures higher

than 60 degrees Celsius (140 degrees Fahrenheit). Do not attempt to open or ser-

vice batteries; replace batteries only with batteries designated for the product.

Turn down the volume before using headphones or other audio devices.



Observe the following additional safety guidelines for your system:

Unless your installation and/or troubleshooting documentation specifically allows

it, do not remove enclosure covers, attempt to override the safety interlocks, or

access any components inside the system. Depending on your system, installa-

tion and repairs may be done only by individuals who are qualified to service your

computer or storage system equipment and trained to deal with products capa-

ble of producing hazardous energy levels.

When connecting or disconnecting power to hot-pluggable power supplies, if

offered with your Dell product, observe the following guidelines:

—Install the power supply before connecting the power cable to the power

supply.

—Unplug the power cable before removing the power supply.

—If the system has multiple sources of power, disconnect power from the sys-

tem by unplugging all power cables from the power supplies.

vii

Move products with care; ensure that all casters and/or stabilizers are firmly con-

nected to the computer or storage system. Avoid sudden stops and uneven

surfaces.



Observe the following precautions for rack stability and safety. Also refer to the rack

installation documentation accompanying the system and the rack for specific warn-

ing and/or caution statements and procedures.

$%&**1

!1")

#"

!1

1"

1

'1

#

NOTE: Dell’s server and storage systems are certified as components for use in Dell’s

rack cabinet using the Dell customer rack kit. The final installation of Dell systems and

rack kits in any other brand of rack cabinet has not been approved by any safety agen-

cies. It is the customer’s responsibility to have the final combination of Dell systems

and rack kits for use in other brands of rack cabinets evaluated for suitability by a certi-

fied safety agency.

System rack kits are intended to be installed in a Dell rack by trained service tech-

nicians. If you install the kit in any other rack, be sure that the rack meets the

specifications of a Dell rack.

Do not move large racks by yourself. Due to the height and weight of the rack,

Dell recommends a minimum of two people to accomplish this task.

Before working on the rack, make sure that the stabilizers are secure to the rack,

extend to the floor, and that the full weight of the rack rests on the floor. Install

front and side stabilizers on a single rack or front stabilizers for joined multiple

racks before working on the rack.

Always load the rack from the bottom up, and load the heaviest item in the rack

first.

Make sure that the rack is level and stable before extending a component from

the rack.

Extend only one component at a time from the rack.

Use caution when pressing the component rail release latches and sliding a com-

ponent into or out of a rack; the slide rails can pinch your fingers.

After a component is inserted into the rack, carefully extend the rail into a locking

position, and then slide the component into the rack.

Do not overload the AC supply branch circuit that provides power to the rack. The

total rack load should not exceed 80 percent of the branch circuit rating.

Ensure that proper airflow is provided to components in the rack.

viii

Do not step on or stand on any system/component when servicing other sys-

tems/components in a rack.



 !"#$%

Observe the following guidelines when working with options:

Do not connect or use a modem or telephone during a lightning storm. There

may be a risk of electrical shock from lightning.

Never connect or use a modem or telephone in a wet environment.

Do not plug a modem or telephone cable into the network interface controller

(NIC) receptacle.

Disconnect the modem cable before opening a product enclosure, touching or

installing internal components, or touching an uninsulated modem cable or jack.

Do not use a telephone line to report a gas leak while you are in the vicinity of the

leak.

 &

Observe the following precautions for laser devices:

Do not open any panels, operate controls, make adjustments, or perform proce-

dures on a laser device other than those specified in the product’s documentation.

Only authorized service technicians should repair laser devices.



Before you remove the computer covers, perform the following steps in the sequence

indicated.

0*)

!*

"''

*



":)





1. Turn off your computer and any devices.

2. Ground yourself by touching an unpainted metal surface on the chassis, such as

the metal around the card-slot openings at the back of the computer, before

touching anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer

chassis to dissipate any static electricity that might harm internal components.

3. Disconnect your computer and devices from their power sources. Also, discon-

nect any telephone or telecommunication lines from the computer.

Doing so reduces the potential for personal injury or shock.

In addition, take note of these safety guidelines when appropriate:

When you disconnect a cable, pull on its connector or on its strain-relief loop, not

on the cable itself. Some cables have a connector with locking tabs; if you are dis-

connecting this type of cable, press in on the locking tabs before disconnecting

the cable. As you pull connectors apart, keep them evenly aligned to avoid bend-

ing any connector pins. Also, before you connect a cable, make sure that both

connectors are correctly oriented and aligned.

Handle components and cards with care. Don’t touch the components or con-

tacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a

component such as a microprocessor chip by its edges, not by its pins.

+



Static electricity can harm delicate components inside your computer. To prevent

static damage, discharge static electricity from your body before you touch any of

your computer’s electronic components, such as the microprocessor. You can do so

by touching an unpainted metal surface on the computer chassis.

As you continue to work inside the computer, periodically touch an unpainted metal

surface to remove any static charge your body may have accumulated.

You can also take the following steps to prevent damage from electrostatic discharge

(ESD):

When unpacking a static-sensitive component from its shipping carton, do not

remove the component from the antistatic packing material until you are ready to

install the component in your computer. Just before unwrapping the antistatic

packaging, be sure to discharge static electricity from your body.

When transporting a sensitive component, first place it in an antistatic container

or packaging.

Handle all sensitive components in a static-safe area. If possible, use antistatic

floor pads and workbench pads.

The following notice may appear throughout this document to remind you of these

precautions:

0;,*<



 !

 1#

 .'



For comfort and efficiency, observe the following ergonomic guidelines when you set

up and use your computer system:

Position your system so that the monitor and keyboard are directly in front of you

as you work. Special shelves are available (from Dell and other sources) to help

you correctly position your keyboard.

Set the monitor at a comfortable viewing distance (usually 510 to 610 millimeters

[20 to 24 inches] from your eyes).

Make sure that the monitor screen is at eye level or slightly lower when you sit in

front of the monitor.

Adjust the tilt of the monitor, its contrast and brightness settings, and the lighting

around you (such as overhead lights, desk lamps, and the curtains or blinds on

nearby windows) to minimize reflections and glare on the monitor screen.

Use a chair that provides good lower back support.

Keep your forearms horizontal with your wrists in a neutral, comfortable position

while you use the keyboard or mouse.

Always leave space to rest your hands while you use the keyboard or mouse.

Let your upper arms hang naturally at your sides.

Sit erect, with your feet resting on the floor and your thighs level.

When sitting, make sure the weight of your legs is on your feet and not on the

front of your chair seat. Adjust your chair’s height or use a footrest, if necessary,

to maintain proper posture.

Vary your work activities. Try to organize your work so that you do not have to

type for extended periods of time. When you stop typing, try to do things that

use both hands.

Autres manuels pour PowerVault 200S

Ce manuel convient aux modèles suivants

Autres manuels Dell Stockage

Dell

Dell PowerVault MD3200 Series Manuel utilisateur

Dell

Dell Data Domain DD9500 Guide d'installation

Dell

Dell PS Series Manuel utilisateur

Dell

Dell PowerVault ML6010 Mode d'emploi

Dell

Dell Inspiron 1000 Instructions d'installation et d'entretien

Dell

Dell PowerVault TL4000 Manuel utilisateur

Dell

Dell PowerVault MD3200i Series Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

Dell

Dell PowerVault MD1200 Manuel utilisateur

Dell

Dell PowerVault 110T SDLT320 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Fiche technique

Dell

Dell PowerVault MD3600i Series Manuel utilisateur

Dell

Dell PowerVault NF100 Manuel utilisateur

Dell

Dell PowerVault MD3260 Series Guide de référence rapide

Dell

Dell PowerVault NX300 Manuel utilisateur

Dell

Dell PowerVault TL2000 Manuel utilisateur

Dell

Dell PS-M4110 Manuel utilisateur

Dell

Dell PowerVault TL2000 Comment utiliser

Dell

Dell PowerVault DL2100 Manuel utilisateur

Dell

Dell PS Series Guide de l'utilisateur

Dell

Dell PowerVault 100T TR40 Manuel utilisateur

Dell

Dell PowerVault DL4000 Manuel utilisateur

Dell

Dell PowerVault DL4000 Manuel utilisateur

Dell

Dell PowerVault MD3400 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur