D-Link DKVM-2K Manuel utilisateur

2-Port KVM Switch

with Built-in Cables

DKVM-2KDKVM-2K

DKVM-2K

This product works with allThis product works with all

This product works with all

Windows Operating SystemsWindows Operating Systems

Windows Operating Systems

Check Your Package Contents

These are the items included with your purchase:

Before You Begin

You must have at least the following:

•PS/2 Keyboard

•PS/2 Mouse

•VGA or Higher Monitor

• DKVM-2K KVM Switch with Built-In

Cables

• Quick Installation Guide

their respective holders. Software and specifications subject to change without notice. DKVM-2K.07242003

If any of the above items are missing, please contact your reseller.

Installing the DKVM-2K

Attach your computer’s 6-pin PS/2

male keyboard connector to the

DKVM-2K keyboard port.

Attach your monitor’s HDDB 15 VGA

connector to the console port of the

DKVM-2K.

Attach your computer’s 6-pin PS/2

male mouse connector to the

DKVM-2K mouse port.

Make sure that all your computers are turned OFF before

installing the DKVM-2K to avoid mouse and keyboard errors

when booting up your computers.

Installing the DKVM-2K

Attach the DKVM-2K‘s built-in

monitor cable to the VGA port

located on the back of your

computer case.

Attach the DKVM-2K’s built-in

mouse cable to the PS/2 mouse

port located on the back of your

computer case.

Attach the DKVM-2K’s built-in

keyboard cable to the PS/2

keyboard port located on the

back of your computer case.

Type A

Power ON all your attached computers after you have

completed the DKVM-2K installation.

The following steps below apply to both the computers that you are using with your

DKVM-2K.

Switchingwith the DKVM-2K

The DKVM-2K features a Select Button located on the front panel and keyboard Hot

Keys to switch quickly and easily between both your computers.

Select

Button

You can also use your keyboard to switch between your computers. Press the Scroll

Lock key twice to enter Hot Key switching mode. A beep confirms that the Hot Key mode

is activated.

Hot Key Menu

Scroll Lock + Scroll Lock + 1 : Switches to PC 1

Scroll Lock + Scroll Lock + 2 : Switches to PC 2

Scroll Lock + Scroll Lock + S : Activates Auto Scan Mode. Each

computer will be scanned every 10

seconds.

Scroll Lock + Scroll Lock + ESC : Exits Auto Scan Mode and Hot

Key Mode.

Troubleshooting Tips

Keyboard

If your keyboard is not functional, not detected, or there is a keyboard error on boot-up,

check the following:

• Make sure that the keyboard is properly connected to the

computer and to the DKVM-2K. Check that the keyboard is plugged into the

correct PS/2 keyboard port and not the PS/2 mouse port.

• Verify that the keyboard works when plugged into the computer directly. You

will have to shut down your computer first to do this.

• Read your motherboard documentation and make sure that the PS/2

keyboard’s IRQ is enabled. This can be set for most computers in the

BIOS setup.

• Try using a different keyboard.

Mouse

If your mouse is not functional, not detected, or there is a mouse error on boot-up, check

the following:

• Make sure that the mouse is properly connected to the

computer and to the DKVM-2K. Check that mouse is plugged into the

correct PS/2 mouse port and not the PS/2 keyboard port.

• Verify that the mouse works when plugged into the computer directly. You

will have to shut down your computer first to do this.

• Read your motherboard documentation and make sure that the PS/2

mouse’s IRQ is enabled. This can be set for most computers in the

BIOS setup.

• Try using a different mouse.

• If mouse movement is random when switching between computers, try shutting

down your computer and rebooting.

• Verify that your computers do not have more than one mouse driver installed

(check your config.sys and autoexec.bat files for Windows) and that you are

using the latest mouse driver.

• If a special mouse is used such as a cordless or scrolling mouse, make sure

you use generic PS/2 mouse drivers. A non-standard PS/2 mouse may have

extensions on the PS/2 protocol that are not supported by the DKVM-2K.

• Do not move the mouse or press any mouse buttons when switching from one

PC to another.

• Try resetting the mouse by unplugging it from the DKVM-2K for about 3 seconds

and reconnecting.

Video

If the image on your monitor is not clear, check the following:

• Verify that all video monitor cables are inserted properly.

• Try lowering the resolution and refresh rate of your monitor.

• Try using a shorter video cable.

Technical Support

You can find software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and

within Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link Technical Support through our

website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

24 hours a day, seven days a week.

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

Monday to Friday 8:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

Autres manuels pour DKVM-2K

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DKVM-IP8 Manuel utilisateur

D-Link

D-Link D DGS-3048 DGS-3048 Manuel utilisateur

D-Link

D-Link DGS-1008MP Manuel utilisateur

D-Link

D-Link DES-1005P Manuel utilisateur

D-Link

D-Link DKVM-2 Manuel utilisateur

D-Link

D-Link DGS-1100-05PDV2 Manuel utilisateur

D-Link

D-Link DES-1008P Manuel utilisateur

D-Link

D-Link DGS-1210/ME series Manuel utilisateur

D-Link

D-Link DGS-1024D - Switch Manuel utilisateur

D-Link

D-Link DAS-3626 Manuel utilisateur

D-Link

D-Link DES-1005D Manuel utilisateur

D-Link

D-Link DGS-1210-28P Manuel utilisateur

D-Link

D-Link DKVM-IP8 Manuel utilisateur

D-Link

D-Link DGS-1210-10P Manuel utilisateur

D-Link

D-Link DUB-CR200 Manuel utilisateur

D-Link

D-Link DKVM-4U Manuel utilisateur

D-Link

D-Link DXS-3227P - xStack Switch - Stackable Manuel utilisateur

D-Link

D-Link DGS-3100 SERIES Manuel utilisateur

D-Link

D-Link 1016R - DES Switch Manuel utilisateur

D-Link

D-Link DES-1250G Manuel utilisateur

D-Link

D-Link DIS-100G-5PSW Manuel utilisateur

D-Link

D-Link DGS-1010MP Manuel utilisateur

D-Link

D-Link DQS-5000-32S Manuel utilisateur

D-Link

D-Link KVM-221 - KVM / Audio Switch Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur