D-Link DSL-G604T Manuel utilisateur

respective holders. Software and specifications subject to change without notice.

DSL-G604T ADSL Modem Router.

Before You Begin

1. If you purchased this Router to share your high-speed Internet connection with other

computers, you must have an established Internet account from an Internet Service Provider

(ISP).

2. It is best to use the same computer that is connected to your ISP for configuring the DSL-

G604T ADSL Modem Router. The DSL-G604T acts as a DHCP server and will assign all the

necessary IP address information on your network. See the Appendix for setting each

network adapter to automatically obtain an IP address.

Check Your Package Contents

If any of the above items are missing, please contact your reseller.

This product can be setup using

any current web browser, i.e.,

InternetExplorer6orNetscape

Navigator 6.2.3.

Using a power adapter with

a different voltage rating will

damage and void the

warranty for this product.

DSL-G604T Generation II

Wireless ADSL2+ Modem Route

CD-ROM with Click’n Connect Utility and

Product Documentation

Wireless Antenna

Telephone Cable (RJ-11)

CAT 5 UTP Ethernet Cable (RJ-45)

12V 1.25A

Power Adapter

DSL-G604T

DSL Modem Route

Connecting the Router to your

Computer

1. First, connect the power adapter to the power input at the back

panel of the DSL-G604T and then plug the other end of the

power adapter to a wall outlet or power strip. On the front of

the device, the Power LED will turn ON to indicate proper

operation.

2. Insert one end of the Ethernet cable into an Ethernet port on

the back panel of the DSL-G604T and the other end of the

cable to an Ethernet Adapter or available Ethernet port on your

computer.

3. Insert the telephone cable included with the Router into the

ADSL port, and then connect the cable to your telephone line.

(Line must be activated for ADSL use)

4. Check the LED display on the front of the Router to confirm

that the connections have been made. (This will be shown with

solid lights for the corresponding port)

ADSL Port

Connect to

your ADSL

hone line

Antenna

Post

Connect

antenna here

Ethernet Ports

Connect to

Ethernet cable

Power Input

Connect to

ower ada

ter

Configuring the Router via the

D-Link Click’n Connect Utility

Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should

appear automatically. If it does not appear, explore your CD-ROM drive within

Windows, and double-click on the file “dslutility.exe” to start the utility

manually.

You can select one of five options:

1. User Manual: This option will open up the DSL-G604T user manual.

You will need Adobe Acrobat Reader installed to view the manual.

2. Quick Install Guide: This option will show you a software-based version

of this Quick Install Guide

3. Install Acrobat Reader: Selecting this option will install Adobe Acrobat

Reader onto your PC.

4. Technical Support: Selecting this option will link you to D-Link

Australia/New Zealand Technical Support online.

5. Start Installation: This will commence the installation of the DSL-

G604T.

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 1 - Power Up the Device

Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the

Status LED to blink before proceeding onto the next step.

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 2 – Connect the Device to your Computer

Connect the Ethernet cable from the computer to one of the LAN ports

(numbered 1 to 4) on the DSL-G604T now. Wait for the LAN Link LED for the

corresponding LAN port number to flash, then click on Next to continue to Step

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 3 – Connect the Device to the ADSL Line

Connect your ADSL telephone line from the wall socket to the DSL-G604T

ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will

need to connect the telephone line from the DSL socket on the filter to the DSL-

G604T ADSL socket.

Once you have completed this, wait for the ADSL LED to light up, and click on

Next to continue to Step 4.

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 4 – Checking Device Connectivity

The Click’n Connect utility will now check the DSL-G604T to make sure it has

been connected correctly. Once it has successfully detected your modem, it will

proceed to the next step automatically.

At this point, you may want to prepare your ADSL account information that is

provided to you by your Internet Service Provider (ISP) as you will require it

shortly.

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 5 – ISP Configuration

You will now be prompted to select your Country as well as your Internet

Service Provider (ISP). If your ISP is not listed for your country, select Other

and enter the details that are relevant to your ISP.

Once you have completed this step, click on Next to continue onto Step 6.

Click Next to

continue

Select your

ISP

Select your

Country

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 6 – Account Configuration

At this step, you will be required to enter your ADSL account Username, as

provided by your ISP. You will also be required to enter your ADSL account

Password, then reenter the password in the Confirm Password box.

Please note, different ISP’s use different Usernames. Some use the first part of

your email address while some ISP’s use part or all of your email address. If

you are unsure as to which one your ISP uses, please confirm this with your

ISP.

Once you have completed this step, click on Next to continue onto Step 7.

Enter your ISP Username

Enter your ISP Password

Re-Enter

our ISP Password

Click Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 7 – Set Wireless Connection

You will now be asked if you would like to enable your Wireless Radio. The

wireless radio is what the router uses to provide wireless networking

functionality to your wireless computers. If you would like to turn the radio on,

select Enabled to turn it on, otherwise select Disabled to turn the radio off.

You can turn the radio on or off at a later date by referring to your User Manual.

Once you have completed this step, click Next to continue. If you Enabled

your wireless radio, proceed to step 7A on Page 10. If you Disabled your

wireless radio, proceed to Step 8 on Page 11.

Select your

Wireless Radio

Preference

Click Next to

continue

Autres manuels pour DSL-G604T

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DHP-W311AV Manuel utilisateur

D-Link

D-Link DIR-457U Manuel utilisateur

D-Link

D-Link DSR-500 Manuel utilisateur

D-Link

D-Link DSL-3682 Manuel utilisateur

D-Link

D-Link 504T Manuel utilisateur

D-Link

D-Link AC750 Manuel utilisateur

D-Link

D-Link DSL-245GR Manuel utilisateur

D-Link

D-Link DSL-3900 Manuel utilisateur

D-Link

D-Link DSL-2890L Manuel utilisateur

D-Link

D-Link DSL-514 Manuel utilisateur

D-Link

D-Link DWR-M960 Manuel utilisateur

D-Link

D-Link M32 Manuel utilisateur

D-Link

D-Link DES-3550 Manuel utilisateur

D-Link

D-Link Xstack DGS-3300 Series Manuel utilisateur

D-Link

D-Link DSL-2640U Manuel utilisateur

D-Link

D-Link DES-3010G Manuel utilisateur

D-Link

D-Link DSL-2640B Manuel utilisateur

D-Link

D-Link EasySmart DES-1100-16 Manuel utilisateur

D-Link

D-Link DGS-3000-10TC Manuel

D-Link

D-Link Xtreme N DGL-4500 Manuel utilisateur

D-Link

D-Link DI-304 Manuel de service

D-Link

D-Link DIR-615A Manuel utilisateur

D-Link

D-Link xStack DES-3200-10 Manuel utilisateur

D-Link

D-Link Air DWL-810 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité