D-Link DSL-G804V Manuel utilisateur

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice.

L-

804V Wireless AD

L Route

This product works with the following

operating system software: Windows

98, Windows NT, Windows 2000,

Windows Me and Windows XP.

DSL-G804V

Wireless ADSL Router

CD-ROM (Quick Install Guide and Manual)

One Ethernet (CAT5 UTP Straight-through)

Cable

One ADSL Cable

(standard telephone cable)

12V, 1A

Power Adapter

Using a power adapter

with different voltage

rating will damage and

void the warranty for this

product.

One Console (PS/2-RS232) Cable

Connecting the Router to your

Computer

Rear Panel Connections

Antenna

Omni Directional

ADSL Modem

Port

Connect to your

ADSL provider

Console Port

Connect to

PS2/RS-232

LAN Ports

Connects to the

LAN and other

computers

Factory Reset

Push in 5 seconds to

return to factory

default settings

DC Power Input

Connect to DC

Adapter

A、First, connect the power adapter to the power input at the back panel of the

DSL-G804V and then plug the other end of the power adapter to a wall outlet

or power strip.On the front of the device, the power LED will turrn ON to

indicate proper operation.

B、Insert one end of the Ethernet cable into an Ethernet(LAN) port on the back

panel of the DSL-G804V and the other end of the cable to an Ethernet Adapter

or available Ethernet port on your computer.

C、Insert the telephone cable included with the Router into the ADSL port, then

connect the cable to your telephone line.

D、Check the LED display on the front of the Router to confirm that the

connections have been made.

Connecting the Router to your

Computer (continued)

Front Panel LEDs

Power Steady green light indicates the unit is powered on. When the device

is powered off this remains dark.

Status

Lights steady green during power on self-test (POST). Once the

connection status has been settled, the light will blink green. If the

indicator lights steady green after the POST, the system has failed

and the device should be rebooted.

ADSL:

Link/Act

Steady green light indicates a valid ADSL connection. This will light

after the ADSL negotiation process has been settled. A blinking

green light indicates activity on the WAN (ADSL) interface.

WLAN Lit green when the wireless connection is established. A blinking

green when sending/receiving data.

LAN 1 - 4:

Link/Act

Green: The router has a successful 100Mb Ethernet connection. A

solid green light indicates a valid link on startup. These lights blink

when there is activity currently passing through the Ethernet port.

Orange: The router has a successful 10Mb Ethernet connection. A

solid green light indicates a valid link on startup. These lights blink

when there is activity currently passing through the Ethernet port.

PPP/MAIL Lit steady when there is a PPPoA / PPPoE connection. Lit and

flashed periodically when there is email in the Inbox

Configuring the Router

You have two methods to configure your router. The one is you can use the

Configuration Utility which is contained in the CD-ROM and follow the instructions

step by step to easy configure your router.

The other one is to use your Web browser to access the web pages used to setup the

Router, your computer must be configured to “Obtain an IP address automatically”,

that is, you must change the IP network settings of your computer so that it is a DHCP

Client. If you are using Windows XP and do not know how to change your network

settings, skip ahead to Appendix A and read the instructions provided. You may also

read the User Manual for instructions on changing IP settings for computers running

Windows operating systems.

Open the web browser and

type http://192.168.1.1 in

the browser’s address box.

This number is the default IP

address for this router.

Press Enter.

A user name and password

window will appear. The

default User Name and

Password are “admin” and

“admin”. Press OK to logon

to the router.

Click OK

Configuring the Router (continued)

Once you have logged in, the Home directory tab is prominent with the Setup Wizard

menu displayed. Most users will be able to use the Setup Wizard to establish the

ADSL connection to your ISP. To begin using the Setup Wizard, click on the Run

Wizard button in the middle of the web page. A pop-up menu will appear. This pop-up

menu is the Setup Wizard. The Setup Wizard procedure consists of four general

steps:

1. Set your new password

2. Set Internet connection

3. Set Wireless connection

4. Save configuration

When you setup the Internet connection, you will need to enter information provided by

your ISP. The type of information you need depends on the type of connection you are

setting up.

Click on the Run Wizard button.

Configuring the Router (continued)

The first window of the Setup Wizard menu lists a summary of the steps required to

complete the setup. Click the Next button to begin setup and go on to step 1.

Click the Next button.

Configuring the Router (continued)

The factory default password is admin, you may like change the the password by

entering in a new password.

Click the Next button.

Configuring the Router (continued)

You will see the Detecting Internet Connection Type Screen.

Next, you need to select and set the Internet Connection Type for the WAN

interfaces. Your ISP has given this information to you. If you do not know what type of

connection to use, exit the Set Wizard and contact your ISP for the information. The

Setup Wizard menu that appears when you click the next button depends on what

connection type you select.

Click the Next button.

Select the Connection Type used

for

our ADSL service.

Configuring the Router (continued)

PPPoE/PPPoA Connections

Type in the Username and Password used to identify and verify your account to the

ISP. The VPI number and VCI number should not be changed unless you have been

instructed by ISP to change them. Select the Connection Type used for

encapsulation specific to your service. Click Next when you are ready to continue to

the Setup Completed menu. If you are not sure what Connection Type,VPI and VCI

to use, please check with your ISP.

Click the Next button.

Type the VPI and

VCI, if these

values are not

correct, check

with your ISP for

information.

Type the

Username and

Password for

your ISP

account.

Use the pull-

down menu to

choose the

correct

Connection

Type. The user

may choose

between PPPoE

or PPPoA, as

instructed by

your ISP.

Type the IP addresses for the

WAN IP Address, Subnet

Mask, ISP Gateway

Address, Primary DNS

Address and/or Secondary

DNS Address, as instructed

by your ISP.

Configuring the Router (continued)

MPoA/IPoA

For this connection type, the user may choose MPoA or IPoA. The VPI number and

VCI number should not be changed unless you have been instructed by ISP to change

them. Select the Connection Type used for encapsulation specific to your service.

Click Next when you are ready to continue to the Setup Completed menu.If you are

not sure what Connection Type,VPI and VCI to use, please check with your ISP.

Click the Next button.

Use the pull-

down menu to

choose the

correct

Connection

Type. The user

may choose

between MPoA

or IPoA, as

instructed by

your ISP.

Type the VPI and

VCI, if these

values are not

correct, check

with your ISP for

information.

Type the IP addresses for the

WAN IP Address, Subnet

Mask, ISP Gateway

Address, Primary DNS

Address and/or Secondary

DNS Address, as instructed

by your ISP.

Autres manuels pour DSL-G804V

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DIR-842V2 Manuel utilisateur

D-Link

D-Link DES-2218 Manuel utilisateur

D-Link

D-Link DIR-860L Manuel utilisateur

D-Link

D-Link DIR-882 Manuel utilisateur

D-Link

D-Link GO-RT-AC750 Manuel utilisateur

D-Link

D-Link DSL-2640B Manuel utilisateur

D-Link

D-Link DSL-504 Manuel utilisateur

D-Link

D-Link DIR-880L Manuel utilisateur

D-Link

D-Link DES-3526 - Switch - Stackable Manuel utilisateur

D-Link

D-Link DES-3550 Manuel utilisateur

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manuel utilisateur

D-Link

D-Link DSL-504T Manuel utilisateur

D-Link

D-Link DIR-845L Manuel utilisateur

D-Link

D-Link DIR-X1530 Manuel utilisateur

D-Link

D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Manuel utilisateur

D-Link

D-Link Amplifi DIR-657 Manuel utilisateur

D-Link

D-Link DSL-2640U Manuel utilisateur

D-Link

D-Link AC1200 Manuel utilisateur

D-Link

D-Link DSL-6540U Manuel utilisateur

D-Link

D-Link DIR-605L Manuel utilisateur

D-Link

D-Link DSL-2740B Manuel utilisateur

D-Link

D-Link xStack DGS-3400 Series Manuel utilisateur

D-Link

D-Link DSL-3590L Manuel utilisateur

D-Link

D-Link DIR-821 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité