D-Link DGE-550SX Manuel utilisateur

D-Link DGE-550SX PCI-X

1000Base-SX Network Adapter

User’s Guide

Rev. 03 (August 2006)

Contents

Introduction ................................................................................................. 1

General Description ............................................................................................ 1

Safety Precautions ....................................................................................... 2

Avoiding Injuries .................................................................................................. 2

Avoiding Damage ................................................................................................ 3

Minimum System Requirements ................................................................. 3

LED Indicators ............................................................................................. 3

Summary of Features ................................................................................. 4

Driver Installation ........................................................................................ 5

Windows 2000 ..................................................................................................... 5

Windows XP and Windows Server 2003, 32-bit Systems ................................... 5

Windows XP and Windows Server 2003, 64-bit Systems ................................... 6

Linux .................................................................................................................... 7

Novell Netware .................................................................................................... 8

Novell Netware 5.10 ...................................................................................... 8

Novell Netware 6.x ........................................................................................ 9

FreeBSD ........................................................................................................... 10

Network Control for Windows ...................................................................11

Troubleshooting ........................................................................................ 13

Confirming the Connection (LED Indicator) ...................................................... 13

Troubleshooting the Hardware Installation ........................................................ 13

Verifying Each Computer’s Identification ........................................................... 13

Verifying Network Adapter Installation .............................................................. 13

Verifying Cable Connections ............................................................................. 14

Pinging your DGE-550SX Network Adapter ...................................................... 14

Specifications ............................................................................................ 16

Contacting Technical Support .................................................................. 18

Warranty ...................................................................................................... 19

Product Registration ................................................................................. 22

-1-

Introduction

Thank you for choosing the D-Link DGE-550SX PCI-X 1000Base-SX Network

Adapter, the value leader among Gigabit Ethernet network adapters. This chapter

provides a general description of DGE-550SX network adapter features, with a

summary of features at the end of the chapter. Installation instructions are provided in

the following chapters.

General Description

The D-Link DGE-550SX PCI-X 1000Base-SX Network Adapter is a high-bandwidth

network adapter, providing up to 2000Mbps full-duplex bandwidth capacity to support

high-end servers. This network adapter delivers added performance to the network

while working with the existing LAN infrastructure. In addition, with advanced

functions such as VLAN filtering and hardware-based IP packet processing, it

provides added performance (by offloading the server’s overheads), flexible

configuration and secure networking to users in a standards-based environment.

Inside its compact form, the DGE-550SX network adapter holds a Gigabit Ethernet

controller and a standard-based PCI/PCI-X interface with a fiber SC duplex connector.

Its front panel includes LEDs to indicate linkage and activity states.

The DGE-550SX network adapter can be installed in (short) 32-bit or (long) 64-bit

PCI/PCI-X slots at 33 MHz, 66 MHz, 100 MHz, or 133 MHz. Best performance,

however, is reached with a 64-bit/133 MHz bus.

To setup the DGE-550SX network adapter no pre-installation is required—simply

insert it into the PCI/PCI-X slot (for detailed information, please refer to the Installation

Guide). For further information on how to install the driver for different operating

systems, refer to section “Driver Installation”.

-2-

Safety Precautions

To protect yourself from injuries and avoid damage of the device, always observe the

following safety instructions when installing the network adapter.

Avoiding Injuries

WARNING: Electrical Current!

Electrical current from power, phone, and communications cables can be hazardous.

Never touch any electrical elements with bare hands.

To avoid potential shock hazards:

• Do not carry out any installation, maintenance, or (re)configuration work during a

thunderstorm.

• Do not connect or disconnect any power cables during a thunderstorm.

• For installation in a Hot-Plug system, observe the safety instructions specific to

this system. Read the relevant documentation.

NOTE: Electrical installations must comply with the safety regulations of the country in

which they are operated.

WARNING: Laser Light!

Laser light from fiber-optic transmission cables and components can damage your

eyes.

The laser components on the network adapter are Class 1 laser components. Class 1

lasers are considered incapable of producing damaging radiation levels during normal

operation or maintenance and is, therefore, determined to be eye safe.

To avoid damaging your eyes and to continue safe operation in case of abnormal cir-

cumstances:

• Never look directly into the outlets of fiber-optic cables or fiber-optic transmission

components with unprotected eyes!

• Never allow fiber-optic transmission paths to operate until all the connections

have been made.

• Always fit protective plugs to any unused ports on the switch or the network

adapter.

CAUTION: Radiation!

The use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

-3-

Avoiding Damage

CAUTION: Electrostatic Discharge!

Electrostatic discharge may damage or destroy the network adapter.

To avoid damaging the network adapter:

• Put on an antistatic wrist strap (electrically conductive) and connect it to the com-

puter chassis before handling the network adapter.

Do not connect the wrist straps to the ground terminal of the power supply! Faulty

wiring could make this terminal live and potentially lethal.

• If you need to place the network adapter somewhere after removing it from the

antistatic bag, make sure that you place it on the antistatic bag and on a level sur-

face. Do not place the network adapter on the computer cover or on any other

metal surface.

• Do not touch any circuits on the network adapter or any of its port contacts.

Minimum System Requirements

Your computer should support:

• Windows®

XP SP2,

Windows 2000 SP4,

or Windows 20031

• CD-ROM Drive

• 20 MB Hard Disk Space

• 32-bit PCI Slot

LED Indicators

The D-Link DGE-550SX PCI-X 1000Base-SX Network Adapter features 2 LED indica-

tors:

• Link Indicator (LINK: Link up/down, 1000Mbps)

This indicator lights green when the 1000Base-SX SC fiber port is connected to

an Ethernet network (link up).

• Activity Indicator (ACT: Transmitting/Receiving)

When this indicator is blinking green, the network adapter is transmitting/receiv-

ing data to/from the Ethernet Network.

1. Computer must adhere to Microsoft’s recommended System Requirements. Please contact Microsoft for

details.

-4-

Summary of Features

Features of the D-Link DGE-550SX PCI-X 1000Base-SX Network Adapter:

• IEEE 802.3z 1000BASE-SX Gigabit Ethernet standard

• IEEE 802.3ad Link Aggregation Control Protocol standard

• IEEE 802.3x Flow-Control and Auto-Negotiation standard

• IEEE 802.1p Quality of Service standard

• IEEE 802.1q/802.3ac VLAN/VLAN Tagging standard

• PCI Specification 2.3 and PCI-X Specification 1.0

• Offloads host operating system’s overhead by providing features such as on-

board verification of IP header and TCP/UDP checksum

• Parity Monitoring on all data paths

• TCP Segmentation

• Jumbo Frames (up to 9K frame size)

• Dynamic Interrupt Moderation

• Promiscuous Mode

• Multicast Support

• Advanced Power Management

• Supported driver list:

• Microsoft Windows 2000

• Microsoft Windows XP

• Microsoft Windows Server 2003

• Novell Netware 5.10

• Novell Netware 6.x

• Linux kernel 2.4.13 and higher stable versions

• FreeBSD 5.x (x86)

-5-

Driver Installation

Windows 2000

D-Link offers an NDIS 5.0 32-bit Miniport driver for the DGE-550SX network adapter

supporting Windows 2000. To install the driver, proceed as follows:

1. After you have installed the network adapter in your computer, boot

Windows 2000.

Windows 2000 detects the DGE-550SX network adapter as “Ethernet Controller”

during the boot operation. The window “Found New Hardware Wizard” is dis-

played.

2. Click NEXT.

In the same window the menu “Install Hardware Device Drivers” is displayed.

3. Select the check box Search for a suitable driver for my device (recommended).

4. Click NEXT.

The menu “Locate Driver Files” is displayed.

5. Select the source from which the driver is to be installed.

6. Type the path to the driver.

7. Click OK.

8. Click NEXT.

The menu “Driver Files Search Results” is displayed, listing the found driver and

its location.

9. To install the driver, click NEXT.

In case the driver does not have a Microsoft Digital Signature yet, the window

“Digital Signature Not Found” is displayed.

10. To continue the installation, click YES.

The window “Completing the Found New Hardware Wizard” is displayed.

11. Click FINISH to complete the installation.

Windows XP and Windows Server 2003, 32-bit Systems

D-Link offers an NDIS 5.1 32-bit Miniport driver for the DGE-550SX network adapter

supporting Windows XP and Windows Server 2003. The installation procedure for

Windows XP and Windows Server 2003 is identical. It is described for Windows

Server 2003.

To install the driver, proceed as follows:

1. After you have installed the network adapter in your computer, boot Windows

Server 2003.

The window “Welcome to Found New Hardware Wizard” is displayed. On the

screen the menu “Can Windows connect to Windows Update to search for soft-

ware” is displayed.

-6-

If you are installing the driver using Windows XP Service Pack 1 or earlier, con-

tinue with step 3.

2. Select NO, NOT THIS TIME.

3. Select the check box Install from a list or specific location (Advanced).

4. Click NEXT.

The menu “Please choose your search and installation options” is displayed.

5. Select the check box Search for the best driver in these locations.

6. Select the check box Include this location in the search.

7. Type the path to the driver.

8. Click OK.

9. Click NEXT.

In case the network adapter has not passed Windows Logo testing to verify its

compatibility with Windows Server 2003, the window “Hardware Installation” is

displayed.

10. To continue the installation, click Continue Anyway.

In the window “Found New Hardware Wizard”, the menu “Completing the Found

New Hardware Wizard” is displayed.

11. Click FINISH to complete the installation.

Windows XP and Windows Server 2003, 64-bit Systems

D-Link offers an NDIS 5.1 64-bit Miniport driver for the DGE-550SX network adapter

supporting Windows XP and Windows Server 2003 on x64 systems.

The installation procedure for 64-bit systems resembles that for the 32-bit systems

described in section “Windows XP and Windows Server 2003, 32-bit Systems” above.

Only the start sequence differs as follows (here described for Windows Server 2003):

1. After you have installed the network adapter in your computer, boot Windows

Server 2003.

The window “Welcome to Found New Hardware Wizard” is displayed. On the

screen the menu “Can Windows connect to Windows Update to search for soft-

ware” is displayed.

2. Select NO, NOT THIS TIME.

3. Click NEXT.

The menu “What do you want the wizard to do?” is displayed.

4. Select the check box Specify the location of the driver (Advanced).

5. Proceed with step 4 of the installation procedure described in section

“Windows XP and Windows Server 2003, 32-bit Systems” above.

-7-

Linux

The Linux driver for the DGE-550SX network adapter supports the Linux kernel 2.4.13

and higher stable versions. The installation procedure described in this manual is a

general description for Intel/x86 computers, which is valid for all distributions.

The installation package offers the following two installation procedures:

• Installation Mode

• Patch Generation Mode

The INSTALLATION MODE is recommended for normal users. Using this mode, the

driver is installed automatically without any user interaction. In case of installation

problems, the driver installation script autonomously tries to solve the problems. The

driver is compiled automatically and the resulting driver module object file is installed

in a suitable location (usually somewhere below the directory /lib/modules/...). No

source files of the driver are installed into the kernel directory. Only the driver module

object file and the manual page (man page) of the driver are installed on your system

permanently.

Using the PATCH GENERATION MODE, a driver patch is created, which can be

integrated into the Linux kernel instead of compiling and installing the driver on your

system. This mode is recommended for advanced users only. For more information,

refer to the corresponding readme file.

In the following, the INSTALLATION MODE is described.

Prerequisites

The following prerequisites have to be met in order to install the Linux driver:

• Any device using the Linux kernel module needs to be stopped.

• Your system has to be equipped with a network adapter.

Without a network adapter the full driver functionality cannot be checked.

• The Linux kernel source must be stored in the directory /usr/src/linux.

The kernel source and the kernel version have to be consistent.

• A compilation tool, e.g. “gcc”, has to be installed on your Linux system.

Prepare the installation package

1. Login as “root”.

2. Unpack the installation package with one of the following commands:

tar xfvj install-???.tar.bz2

bunzip2 -c install-???.tar.bz2 | tar xfv -

The installation script can now be started.

-8-

Install the driver

To start the installation script, proceed as follows:

1. Execute the following command to start the script:

cd DriverInstall

./install.sh

2. Select the option INSTALLATION MODE.

The driver is now compiled and loaded. This process can take a few minutes.

For more information on the Installation Mode or any information on the Patch

Generation Mode, refer to the corresponding readme file or to the kernel

documentation (which usually can be found in the directory /usr/src/linux/

Documentation/ on your system).

Novell Netware

The driver is a 32-bit ODI HSM Novell NetWare server driver for the DGE-550SX

network adapter. It supports both Netware 5.10 and Netware 6.x. In addition to the

32-bit server driver, a Novell ODI 16-bit DOS client MLID driver is available for the

latest Novell NetWare VLM Client.

NOTE: To perform the installation, you must have access to the server console.

NOTE: The setting for Minimum Packet Receive Buffers in the startup.ncf must be

increased to at least 120 per network adapter (e.g. for three network adapters you

should add Set Minimum Packet Receive Buffers = 360 to startup.ncf). On SMP

Systems (Symmetric Multi Processing Systems), you may have to multiply this

number with the number of active processors.

Novell Netware 5.10

To install the network driver on Novell NetWare 5.10, proceed as follows:

1. After you have installed the network adapter in your computer, boot your NetWare

system.

NetWare detects the new network adapter and tries to install a driver.

2. To get a list of available drivers, press <Enter>.

3. The menu “Select a driver” is displayed.

4. To install an unlisted driver, press <Insert> (the D-Link driver is not listed).

5. To specify the path to the driver, press <F3>.

The window “Specify a directory path” is displayed.

6. Type the path to the driver.

If you are installing from CD-ROM, the menu “Select an action” is displayed.

Here, select CONTINUE AND ACCESS THE CD-ROM.

The menu “Select a driver to install” is displayed.

7. Select the driver for your network adapter.

Autres manuels pour DGE-550SX

Table des matières

Autres manuels D-Link Adaptateur

D-Link

D-Link DUB-C2 Manuel utilisateur

D-Link

D-Link Xreme N DWA-160 Manuel utilisateur

D-Link

D-Link DWL-122 Manuel utilisateur

D-Link

D-Link DWL-P100 Manuel utilisateur

D-Link

D-Link G120 - DNS NAS Server Manuel utilisateur

D-Link

D-Link DHP?P309AV Manuel utilisateur

D-Link

D-Link DWA-130 Manuel utilisateur

D-Link

D-Link PersonalAir DBT-320 Manuel utilisateur

D-Link

D-Link PCI-Express X4 Manuel utilisateur

D-Link

D-Link dlinkgo GO-USB-N150 Manuel utilisateur

D-Link

D-Link DWA-162 Manuel utilisateur

D-Link

D-Link AirPlus Xtreme G WUA-2340 Manuel utilisateur

D-Link

D-Link DHP-308AV Manuel utilisateur

D-Link

D-Link AirPlus DWL-650+ Manuel utilisateur

D-Link

D-Link DWA-125 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

D-Link

D-Link DWL-G630 - AirPlus G 802.11g Wireless PC... Manuel utilisateur

D-Link

D-Link DHP-310AV Manuel utilisateur

D-Link

D-Link DVG-2101S Manuel utilisateur

D-Link

D-Link DXE-810T Manuel utilisateur

D-Link

D-Link DFE-538TX Manuel utilisateur

D-Link

D-Link DUB-E130 Manuel utilisateur

D-Link

D-Link AirPlus DWL-120+ Manuel utilisateur

D-Link

D-Link DWA-182 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur