D-Link Air DWL-610 Manuel utilisateur

Note: The installation screenshots were taken in Windows 2000. For other

OS, the installation procedure will be nearly the same but the screenshots

will differ in appearance somewhat.

Package Contents:

D-Link Air DWL-610 Wireless Cardbus Adapter

Printed Quick Installation Guide

CD with Manual and Drivers

If anything is missing, please contact the reseller.

System Requirements

A laptop computer with an available 32-bit Cardbus PC Card slot

At least a 300 MHz processor and 32 MB of memory

Cardbus Controller properlyinstalled and working

An 802.11b Access Point (for Infrastructure Mode) or another 802.11b

wireless adapter (for Ad-Hoc mode.)

Turn on the computer.

Insert the D-Link DWL-610

Installation CD into your CD-

ROM drive.

Installing the DWL-610 Utility

Click

Install Utility.

Click

Next.

Click

Next.

Note:

Do not insert the

DWL

610 Cardbus Adapter.

Wait until the Utility has

loaded.

The followingwindow will

appear.

Accept the default destination

directory, or browse to one of

your choosing.

Again, accept the default

folder name or type a new

name of your own.

The

Setup Status

window

will appear, showing

various operations being

performed.

Done. The DWL-610

Utilityhas been installed.

Now, restart your computer

for settings to take effect.

Click

Finish.

Click

Next.

When your computer hasrestarted, insert the DWL-610 Cardbus Adapter

into an available slot on your notebook or laptop. And re-insert the

Installation CD, which isAuto-Run and will present a splash screen.”For

the moment, close the splash screen and proceed as follows.

As installation progresses,

the followingwindow

appears.

Make sure that

Search for a

suitable . . . is selected and

the Installation CD is

inserted..

Click

Next.

Your computer will find the

DWL-610 and present this

window.

Installing the DWL-610 and the Driver

Click

Next.

The Installation Wizard now

asks where to search for a

driver. Check the boxfor CD-

ROM drives.

When the Wizard finds the

driver for the DWL-610, it

announces the name and

location of the file.

Next, the Microsoft digital

signature”window reminds

you that this device is not a

Microsoft product.

Click

Next.

Click

Yes.

Click

Next.

The Wizard announces that the

installation is complete.

Click

Finish.

Once you have the DWL-610

properlyinstalled, you will see the

icon shown at right that will

appear in your task bar on the

bottom of the screen.

Note:

For first-time use only, you

may have to unplug and re-insert

your cardbus adapter before this

icon appears.

Double

click

on the

icon

in the

taskbar. The Link Info window

appears, showingyour device as

disconnected.

Click

Site Survey.

Connecting to aWireless Network

The Site Surveydisplaysa list of

available wireless networks.

Scroll though the list to find a

network familiar to you.

Be sure to use the horizontal

scroll bar to check whether or not

WEP has been enabled or

disabled.*

Select a network byclickingon

it. .

The

Configuration

window

appears.

Click in the SSID boxand enter the

name of the network you’ve

selected.

Accept the default settings, or

modifythem.

• Wireless Mode: Infrastructure

(default) or Ad Hoc

• Data Encryption: Enabled or

Disabled (default)

• Authentication: Open or shared

• Key Length: 64- or 128-bitt, in

hexadecimal or ASCIIformats.

Click

Add.

Important: If Data Encryption (WEP)is enabled on a network, all

devices must use the same WEP setup. For first-time setup, it s strongly

recommended that Data Encryption be disabled and Authentication

remain Open. For more information, read the User s Guide included on

the Installation CD.

•

IPSettings: You can let the

computer automaticallychoose

an IPAddress and NS Server

Address (default), or assign

specific values.

For simplicityand to make sure

your basic setup is working,

accept the default settings.

Click

OK.

Click

in the Configuration

window, and you’ll be returned to

the Site Surveywindow.

The network you have highlighted

and added now appears in the

Profile section at the bottom.

Click on it to reveal more menu

items.

• Advanced: Allows you to

choose network mode.

• Remove: Disconnects you

from a network.

• Properties: Deals with Data

Encryption and Authentication.

• Rescan: Reorders profiles,

with most accessible listed

first.

For now, the most important

button is

• Connect: Hooks you up to a

wireless network.

Click

Connect.

Click on

Link Info.

Within a few seconds,

information concerningyour

connection will be displayed.

amongother data, your Signal

Strength and transmit/receive

Packet count are shown.

That’s it! Your notebook computer is now part of a wireless network. Now,

no matter where you are, you can confer with colleagues, share data, and take

advantage of all the Internet has to offer . . . all without wires.

Read the Manual . . . please Re

As you move from one network to another, your basic configuration may

have to change to accommodate the needs of the new network. Your DWL-

610 can adapt to manydifferent network environments.

This guide is designedto take you throughbasic setup and installation.

Follow afew simple stepsand your network will soon be up and running.For

details of more advancedconfiguration, and for anexplanation of the different

types and uses of wirelessnetworks, pleasesee theSetup/User’sGuideon the

Installation CD-ROM.

Table des matières

Autres manuels D-Link Adaptateur

D-Link

D-Link DWA-125 Manuel utilisateur

D-Link

D-Link WDA-2320 RangeBooster G Manuel utilisateur

D-Link

D-Link WUA-1340 Manuel utilisateur

D-Link

D-Link DWA-182 Manuel utilisateur

D-Link

D-Link AC1300 Manuel utilisateur

D-Link

D-Link PersonalAir DBT-120 Manuel utilisateur

D-Link

D-Link DSB-650TX Manuel utilisateur

D-Link

D-Link DWA-182 Manuel utilisateur

D-Link

D-Link DVG-2001S Manuel utilisateur

D-Link

D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manuel utilisateur

D-Link

D-Link DWA-171 Manuel utilisateur

D-Link

D-Link Powerline AV+ DHP-309AV Manuel utilisateur

D-Link

D-Link DVG-7111S Manuel utilisateur

D-Link

D-Link DUB-C2 Manuel utilisateur

D-Link

D-Link DVG-2101S Manuel utilisateur

D-Link

D-Link D DPH-50U DPH-50U Manuel d'exploitation

D-Link

D-Link RANGEBOOSTER N 650 Manuel utilisateur

D-Link

D-Link DGE-560SX Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

D-Link

D-Link AirPlus G DWL-G510 Manuel utilisateur

D-Link

D-Link XTREME N DUAL BAND USB ADAPTER DWA-160 Manuel utilisateur

D-Link

D-Link PersonalAir DBT-120 Manuel utilisateur

D-Link

D-Link DGE-528T Manuel utilisateur

D-Link

D-Link AirPro DWL-AB650 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur