D-Link DHP-700AV Manuel utilisateur
User Manual
DHP-700AV/DHP-701AV
Version 1.0 | 12/10/2015
PowerLine AV2 2000 Gigabit Adapter
2D-Link DHP-700AV User Manual
D-Link reserves the right to revise this publication and to make changes to the content herein without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2015 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation, Inc.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a
power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain
periods of time, it can be unplugged to save energy.
Network Standby mode: 3.69W
Revision Date Description
1.0 March 16, 2015 • Hardware revision A1
Preface
3D-Link DHP-700AV User Manual
Table of Contents
D-Link DHP-700AV / DHP-701AV User Manual
Table of Contents
Product Overview.............................................................. 4
Package Contents...............................................................4
System Requirements........................................................4
Introduction.........................................................................5
Features................................................................................5
Hardware Overview ...........................................................6
LEDs........................................................................................... 6
Connection ............................................................................. 7
Hardware Installation ....................................................... 8
Push Button Security .........................................................9
PowerLine Installation Considerations........................ 11
Important Safety Instructions....................................... 12
Troubleshooting ..............................................................13
Technical Specications..................................................14
Regulatory Information ..................................................15
Contacting Technical Support ........................................21
Warranty...........................................................................22
Registration .....................................................................23
4D-Link DHP-700AV User Manual
Section 1 - Product Overview
DHP-700AV PowerLine AV2 2000 Gigabit Adapter
• D-Link DHP-700AV PowerLine AV2 2000 Gigabit Adapter
• Ethernet Cable
• Quick Installation Guide
DHP-701AV PowerLine AV2 2000 Gigabit Adapter Kit
• D-Link DHP-700AV PowerLine AV2 2000 Gigabit Adapter x 2
• Ethernet Cable x 2
• Quick Installation Guide
System Requirements
• Windows® 8, 7, Vista®, or XP®(with Service Pack 2), Mac OS X 10.4
• Minimum Browser Requirements: Internet Explorer 6.0, Firefox 12.0, Chrome 20.0, Safari 4.0
• Ethernet network interface (10/100/1000 Mbps)
• PC with 1.5 GHz Processor
• 1 GB memory
Product Overview
Package Contents
5D-Link DHP-700AV User Manual
Section 1 - Product Overview
Introduction
The DHP-700AV is a fast, 1900 Mbps1PowerLine AV2 2000 Gigabit Adapter which allows you to connect your home computers,
networking devices, and gaming devices through the most pervasive medium in your house - the electric powerlines - and
share Internet connections and printers, transfer les, play games, and more.
Features
• Provides Ethernet to PowerLine Connection
• Fast Data Transfer Rate of Up to 1900 Mbps1
• One Gigabit Ethernet Port
• Plug & Play, Easy Installation
• Push Button Security
• Power Saving Mode
1 Maximum throughput based on theoretical transmission PHY rate. Actual date throughput will vary. Network conditions and environmental factors, including volume of trac and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical noise,
such as vacuum cleaners and hair dryers, may adversely aect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch, short wave radios, or other powerline devices thatdo not follow the HomePlug AV and IEEE1901
standard.
6D-Link DHP-700AV User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Ethernet LED
• Solid: The Ethernet port is linked.
• O: There is no Ethernet connection.
PowerLine LED
• Solid: The device is connected to a PowerLine network.
• Off: The device has not found any other compatible
PowerLine devices using the same encryption key.
The color indicates the PowerLine link rate:
• Green: The PowerLine link rate is excellent.
• Amber: The PowerLine link rate is good.
• Red: The PowerLine link rate is fair.
Power LED
• Solid: The device is receiving electrical power.
• Blinking: The device is setting itself up after the reset or
simple connect button was pressed.
• O: The device is not receiving electrical power.
7D-Link DHP-700AV User Manual
Section 1 - Product Overview
Hardware Overview
Connection
Simple Connect Button
Press to connect to other Powerline
devices on your network. Refer to
“Push Button Security” on page 9
for more information.
Reset Button
Press and hold the button for 5 seconds
to reset to the factory default settings.
Gigabit Ethernet Port
Connect the DHP-700AV to your PC or
Ethernet device with a CAT5 Ethernet
cable.
8D-Link DHP-700AV User Manual
Section 2 - Installation
Hardware Installation
Power
Plug the DHP-700AV into an AC wall outlet or power strip.
Note:Power supply is conrmed when the Power LED on the DHP-700AV is illuminated.
Connect the Ethernet Cable
1. Ensure you have a Powerline product connected to your
router.
2. In a separate room where you require a network
connection, connect the DHP-700AV to your PC or
network device using the supplied Ethernet cable. Plug
the DHP-700AV into a nearby power socket.
3. Press the Simple Connect button on the underside of
both Powerline devices for no longer than three seconds.
Note: Ensure that both Simple Connect buttons are pressed
within 120 seconds.
4. Powerline connectivity is conrmed when the Powerline
LED indicator illuminates, indicating the devices are
now connected.
ROOM B
ROOM A ROOM B
DHP-700AV
DHP-700AV
RouterInternet
PC
PC
DHP-700AV
PowerlineAV22000
2
DHP-700AV
PowerlineAV22000
DHP-700AV
PowerlineAV22000
3
DHP-700AV
ROOM A
DHP-700AV
PowerlineAV22000
1
DHP-700AV
RouterInternet
120Sec
DHP-700AV
PowerlineAV2 2000
PC
RouterInternet
DHP-700AV
PowerlineAV2 2000
9D-Link DHP-700AV User Manual
Section 2 - Installation
Understanding PowerLine AV2 2000 Gigabit Adapter Security
The PowerLine AV2 2000 Gigabit Adapters on the same network must use an identical encryption key. The default encryption
key of each PowerLine AV2 2000 Gigabit Adapter is HomePlugAV. All PowerLine AV2 2000 Gigabit Adapters with the default
encryption key can communicate with each other.
It’s recommended to create a private encryption key for network security purpose. The private encryption key allows you to
protect your network from unauthorized access via the PowerLine network. To create a private encryption key instead of the
default encryption key, please follow the steps below:
1. All Adapters
Plug in all the adapters to be congured. Each device’s encryption key should be set to HomePlugAV (default value). If devices
do not connect the encryption key may not be set to the default value, press the reset button for 5 seconds to reset it to the
default value.
2. First Adapter
Press the Simple Connect Button on the rst adapter for no more than three seconds.
The Power LED will start blinking after you release the button.The adapter will create a private, randomly generated encryption
key that each PowerLine AV2 2000 Gigabit Adapter will use.
Push Button Security
10D-Link DHP-700AV User Manual
Section 2 - Installation
3. Second Adapter
Within two minutes of pushing the Simple Connect Button on the rst adapter, press the Simple Connect Button on the second
adapter in your PowerLine network for no more than three seconds. The Power LED will start blinking after you release the
button.
Note: Both Simple Connect Buttons must be pressed within two minutes.
After the above network security setup steps, your PowerLine network will be securely congured with the same network
encryption key. The adapters will memorize the security settings even if they are unplugged.
Note: To change the private encryption key, please reset the adapter back to its default value by pressing the reset button for
5 seconds and then follow the security setup procedure above.
4. Adding More Adapters
If you would like to add more than two adapters, press the Simple Connect Button of the additional adapter for no more than
three seconds. The Power LED will start blinking after you release the button.
Then press the Simple Connect Button of any adapter in your existing PowerLine network for no more than three seconds.The
Power LED will start blinking after you release the button.
Note: Both Simple Connect Buttons must be pressed within two minutes.
After the above network security setup steps, your PowerLine network will be securely congured with the same network
encryption key.
Autres manuels pour DHP-700AV
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels D-Link Adaptateur
D-Link
D-Link DWA-552 Manuel utilisateur
D-Link
D-Link PowerLine DHP-W611AV Manuel utilisateur
D-Link
D-Link DFE-580TX Manuel utilisateur
D-Link
D-Link WUA-1340 Manuel utilisateur
D-Link
D-Link DWA-542 Manuel utilisateur
D-Link
D-Link DHP?P309AV Manuel utilisateur
D-Link
D-Link DWA-556 Manuel utilisateur
D-Link
D-Link DWM-221 Manuel utilisateur
D-Link
D-Link Air DCF-660W/K Manuel utilisateur
D-Link
D-Link AirPlus DWL-120+ Manuel utilisateur
D-Link
D-Link WUA-1340 Manuel utilisateur
D-Link
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... Manuel utilisateur
D-Link
D-Link AirPlus DWL-650+ Manuel utilisateur
D-Link
D-Link AirPlus DWL-120+ Manuel utilisateur
D-Link
D-Link DWM-156 Manuel utilisateur
D-Link
D-Link DVG-5102S Manuel utilisateur
D-Link
D-Link DBT-122 Manuel utilisateur
D-Link
D-Link DSD-150 - SecureSpot Internet Security... Manuel utilisateur
D-Link
D-Link AirPlusXtremeG DWL-G650 Manuel utilisateur
D-Link
D-Link DWA-582 Manuel utilisateur
