CYP CDPS-4H4HFS Manuel utilisateur
DRAFT
CDPS-4H4HFS
4 by 4 HDMI 4Kx2K Matrix
Operation Manual
Operation Manual
DRAFT
DRAFT
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 March 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
DRAFT
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 17/02/14 Preliminary Release
DRAFT
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................5
6.3 OSD Menu.........................................5
6.4 Remote Control..............................11
6.5 RS-232 Protocols .............................13
6.6 RS-232 Commands.........................14
6.7 Web GUI Control ............................17
7. Connection Diagram .......................... 19
8. Specications ...................................... 20
9. Acronyms ............................................. 22
DRAFT
1
1. INTRODUCTION
The 4 by 4 HDMI matrix which allows HDMI signal from any of its four
sources to be routed to and displayed on any of its four connected
HDMI displays simultaneously. With fast switching technology the
device can greatly eliminate the time required by swapping or
turning ON/OFF the connected displays. It supports 4Kx2K, 3D, 36-bit
Deep Color, Hi-Def lossless audio and other features dened by HDMI
specications. The management of source/sink scenarios can be
operated easily through on-panel buttons, IR remote control, RS-232 or
Ethernet protocol.
2. APPLICATIONS
• Home Theater/Entertainment
• Lecture Room/Hall Presentation
• Show Room/Demo Room
• Public Commercial Display
• Information Board
3. PACKAGE CONTENTS
• 4 by 4 HDMI 4Kx2K Matrix
• Remote Control with Battery
• Left & Right Rack Ears
• 5V/2.6A DC Power Adaptor
• IR Receiver Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipments such as Blu-ray/DVD/PS3 player or Set-
Top-Box and output HDMI TV/Display and or audio amplier with
connection cables.
DRAFT
2
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• Supports four HDMI inputs and four HDMI outputs
• Displays any of four High-Denition sources on four HDTV displays
simultaneously with fast switch
• 3DTV Pass-Through
• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 &
4096x2160@24Hz)
• Supports data rate from 300Mbps to 3Gbps and Deep Color up to
1080p 36-bit
• Supports individual EDID or common EDID
• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH
(Pass through), Dolby TrueHD and DTS-HD Master Audio
• Input port HDCP support Standard and Apple mode. The Apple
mode selection to guarantees the use of Apple devices
DRAFT
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
IN 1 IN 2IN 3IN 4TAKE
OUT A OUT B OUT C OUT DCANCEL
ENTER
MENU
PRESET
ALL
MODE
LOCK
+
-
4K UHD
4X4 HDMI MATRIX FAST SWITCH CDPS-U4H4HFS
1 2 3 5 7 9 10 12 14
4 6 8 11 13
1POWER: Press this button to turn ON the device and the LED will
illuminated.
2IR Window: This IR Receiver receives the remote control signal from
the package include remote control only.
3IN 1~4: Press these IN buttons to select an input from the 4 input
sources.
4OUT A/D: Press these buttons once a time along with an IN buttons
to select an input source for an output display. i.e. OUT A→
IN1→TAKE or OUT B→ IN4→TAKE.
5TAKE: Press this button to conrm the selection of an IN and an OUT
button.
6CANCEL: Press this button to cancel the IN/OUT selection.
7ENTER: Press to conrm the selection.
8MENU: Press to enter into the menu.
9+/-: Press these buttons to move up/down under menu selection.
10 PRESET: Press “PRESET”, the OLED menu will show Preset then select
IN 1~4. Preset 1~4 after the selection, press “TAKE” to conrm the
selection or press “CANCEL” to cancel the selection.
11 All: Press this button to select all outputs to display with an input
source.
12 MODE: TAKE Mode/R.T.(Real Time) mode switch.
13 LOCK: Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
14 LCM: Displaying Input and Outputs selection and menu selection.
DRAFT
4
6.2 Rear Panel
CONTROLSERVICE
HDMI IN HDMI OUT
1234ABCD RS232 IR IN DC 19V
1 2 3 4 5 6 7
1HDMI IN: Connect from source equipments such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output
image and or audio display.
3SERVICE: This slot is reserved for rmware update use only.
4CONTROL: Connect from PC/Laptop with active internet service
for Web GUI control with RJ-45 terminated cable.
5RS232: Connect from PC/Laptop for RS-232 command sending to
control the device.
6IR IN: Connect the IR Receiver included in the package for IR
signal receive from the included remote control.
7DC 5V: Connect the adaptor with power cord included in the
package and connect to AC wall outlet for power supply.
DRAFT
5
6.3 OSD Menu
Main Menu Sub Menu Description Default
EDID Mode All All Input port is using same
EDID.
In menu “EDID All”, can
select suitable EDID.
All
Appoint Each Input port can select
individual EDID.
In menu “EDID IN1~4” select
suitable EDID.
Exit
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP CMSDI-164 Manuel utilisateur
CYP
CYP PUV-44XPL-AVLC Manuel utilisateur
CYP
CYP OR-HD22S Manuel utilisateur
CYP
CYP CPLUS-V32USBC Manuel utilisateur
CYP
CYP CMPRO-U8H8CVE Manuel utilisateur
CYP
CYP CMSI-8H8HS Manuel utilisateur
CYP
CYP CMSI-4H4CVL Manuel utilisateur
CYP
CYP PU-8H8HBTE Manuel utilisateur
CYP
CYP PUV-44XPL-4K22-KIT Manuel utilisateur
CYP
CYP OR-HD42S Manuel utilisateur
CYP
CYP CMSI-8H8CVL Manuel utilisateur
CYP
CYP EL-41S-4K Manuel utilisateur
CYP
CYP PUV-1210PL-RX Manuel utilisateur
CYP
CYP CMPRO-UA8H8CVPL Manuel utilisateur
CYP
CYP CDPS-44SM Manuel utilisateur
CYP
CYP OR-YUV44S Manuel utilisateur
CYP
CYP CMPRO-U4H4CVE Manuel utilisateur
CYP
CYP CMPRO-4H4H Manuel utilisateur
CYP
CYP CMSI-4H4CV Manuel utilisateur
CYP
CYP OR-42SA-4K22 Manuel utilisateur
