CYP CMPRO-4H4H Manuel utilisateur
CMPRO-4H4H
4 by 4 HDMI Matrix
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 10/02/14 Preliminary Release
VS1 10/03/14 Updated text/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Remote Control................................4
6.4 IR Cable Pin Assignment..................5
6.5 RS-232 Protocol.................................5
6.6 RS-232 Commands...........................6
6.7 Web GUI Control ..............................7
7. Connection Diagram ............................ 9
8. Specications ...................................... 10
8.1 Technical Specications ...............10
8.2 Supported Resolutions...................11
9. Acronyms ............................................. 12
1
1. INTRODUCTION
The 4 by 4 HDMI Matrix with 4K×2K Support is capable of switching
and routing an HDMI signal from any of its four sources to any of
four connected HDMI displays, allowing any source to be shown
independently on any display. It supports 3D, 'Deep Color' and High
Denition lossless audio formats. Control of inputs and outputs can be
easily operated through the on-panel buttons, IR remote control, RS-
232 or Web GUI controls.
2. APPLICATIONS
• Showroom display control
• Educational demo
• Installation usage
• Advertising display
3. PACKAGE CONTENTS
• 4 by 4 HDMI Matrix
• IR Extender
• Remote Control (CR-33)
• 5 V/3.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source devices such as Blu-ray/DVD player, games consoles or
set-top boxes and HDMI equipped output display (HDTV/monitor) and
HDMI High Speed cables.
2
5. FEATURES
• Supports Standard and High Denition resolutions up to 4K×2K (UHD)
• Supports up to 7.1 channels of High Denition audio (LPCM, Dolby
TrueHD, and DTS-HD Master Audio)
• Supports 'Deep Color' up to 1080p/36-bit
• Supports Internal/External EDID settings
• Supports control through On-panel Buttons, IR, RS-232, and Web GUI
Note:
1. This unit does not support HDMI to DVI conversion.
2. For playback of 4K×2K HDMI source signals, a 4K×2K capable
display and High Speed HDMI cables are required.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWEREDID
1234
CMPRO-4H4H 4X4 HDMI MATRIX
1 2 3 4
1IR Window: Accepts the remote control signal of this Matrix only.
2POWER Button and LED: Press this button to power the Matrix ON/
OFF. The LED will light up when the power is ON.
3EDID Button and LED: When in 'TV' mode, the unit will detect the
EDID settings of the display connected to Output A. If it detects a
4K×2K capable EDID setting it will transmit the signal in that format to
the output ports. If no 4K×2K capable EDID is detected then the unit
will detect the EDID settings and output the best resolution that all
displays can support.
When in 'STD' mode, the unit will use it's own built-in EDID . In this
mode, the video output will be set to 1080p@60 Hz and the audio
at LPCM 2CH Stereo. Use this mode if there are display problems in
TV Mode.
Note: The LED will light when in STD mode.
4OUTPUT A/B/C/D Buttons and LEDs: Press the 'A', 'B', 'C' or 'D' buttons
to select the source (1~4) for that output, the corresponding LED
will light to indicate the selected source.
4
6.2 Rear Panel
1234
INPUT OUTPUT
RS232IR IN CONTROL
SERVICE
DC 5V
POWER
1 2 3 4 5 6 7
1INPUT 1/2/3/4: Connect to HDMI equipped source devices such as
DVD/Blu-ray players, set-top boxes or games consoles.
2OUTPUT A/B/C/D: Connect to an HDMI TVs/displays or monitors for
display of the selected source signal.
3IR IN: Connect the supplied IR Extender for IR signal reception
from the remote control included in the package. Ensure that the
remote is within the direct line-of-sight of the IR Extender.
4RS-232: Connect to a PC/laptop or RS-232 control system with a
D-sub 9-pin male cable to control the unit with RS-232 commands
(see Section 6.6).
5CONTROL: Connect to an active Ethernet link with an RJ45
terminated cable to control the unit with Web GUI (see Section 6.7).
6SERVICE: Manufacturer use only.
7DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
6.3 Remote Control
1POWER: Press this button to switch the
unit ON or to put it into standby mode.
2OUTPUT A and 1~4: Press buttons 1~4 to
select the required source for Output A.
3OUTPUT B and 1~4: Press buttons 1~4 to
select the required source for Output B.
4OUTPUT C and 1~4: Press buttons 1~4 to
select the required source for Output C.
5OUTPUT D and 1~4: Press buttons 1~4 to
select the required source for Output D.
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
CR-33
2
1
3
4
5
5
6.4 IR Cable Pin Assignment
3
1
2
IR Signal
Power 3.3V
Ground
IR Extender
6.5 RS-232 Protocol
MATRIX
►
◄
REMOTE CONTROL
Pin Assignment Pin Assignment
1 NC 1 NC
2 TX 2 RX
3 RX 3 TX
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19,200bps
Data Bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
Autres manuels pour CMPRO-4H4H
2
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP PU-O4H4C Manuel utilisateur
CYP
CYP PUV-442-4K22 Manuel utilisateur
CYP
CYP OR-44-4K22 Manuel utilisateur
CYP
CYP PUV-1082PL-4K22 Manuel utilisateur
CYP
CYP CMSDI-1616S Manuel utilisateur
CYP
CYP PUV-44XPL-AVLC Manuel utilisateur
CYP
CYP CMPRO-U8H8CVPL Manuel utilisateur
CYP
CYP PU-8H8HBTPL Manuel utilisateur
CYP
CYP CPLUS-44PLV Manuel utilisateur
CYP
CYP OR-42SA-4K22 Manuel utilisateur
CYP
CYP SM-4X2-HDMI-LC Manuel utilisateur
CYP
CYP CPLUS-V4H2HPIP Manuel utilisateur
CYP
CYP CMPRO-UA8H8HS Manuel utilisateur
CYP
CYP CMPRO-4H4H Manuel utilisateur
CYP
CYP OR-DVI88SA Manuel utilisateur
CYP
CYP CMSI-8H8HC Manuel utilisateur
CYP
CYP CMSI-8H8HS Manuel utilisateur
CYP
CYP PU-8H8HBTPL-4K22 Manuel utilisateur
CYP
CYP CPLUS-32FX Manuel utilisateur
CYP
CYP OR-HD44E Manuel utilisateur
