CYP IR-EXT3 Manuel utilisateur
Operation Manual
Operation Manual
Infrared Over CAT5/6 Extender
Model: IR-EXT3
CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents .................................. 1
4. System Requirements.............................. 1
5. Features....................................................2
6. Operation Controls and Functions......... 3
6.1 Transmitter Front and Rear Panels....3
6.2 Receiver Front and Rear Panels .......4
6.3 IR Cable Pin Denition ......................5
6.4 IR Phone Jack Pin Denition..............5
6.5 IR IN Pin Assignment...........................6
6.6 IR OUT Pin Assignment .......................6
6.7 RJ45 Pin Assignment...........................6
7. Connection Diagram .............................. 7
8. Specications .......................................... 8
9. Acronyms .................................................8
1
1. INTRODUCTION
The IR Extender and the IR Repeater Box are perfect for controlling
source devices over long distances using CAT5 Cable.
By using the built-in IR Receiver of the IR Repeater, users are able to
control up to ve sources (with the original remote controls) at the
same time at a distance of up to 250 m.
There are no space limitations with these devices, which means even
if the sources are in a different room or even another oor than the
display, the performance stays the same.
The IR Extender and the IR Repeater Box give users an easy and
convenient way to control their desired source. If however, users only
wish to control sources in the same room then the IR Repeater Box will
be enough to control up to 2 sources.
The IR Extender Box is designed for longer distances and extra source
device control than the IR Repeater Box.
2. APPLICATIONS
• TV sales displays in consumer electronic stores
• Home theater installations
• Lecture room display
• Home entertainment
3. PACKAGE CONTENTS
• 1×Infrared Extender
• 1×Infrared Repeater
• 1×IR Extender (for Infrared Repeater)
• 5×Blasters (3 for Infrared Extender, 2 for Infrared Repeater)
• 1×5V DC Power Adaptor (for Infrared Repeater)
• Operation Manual
4. SYSTEM REQUIREMENTS
IR controlledable source equipment (e.g. DVD or Blu-ray
players) and CAT5 cable.
2
5. FEATURES
•Supports up to 5 outputs (3 for Infrared Extender, 2 for Infrared
Repeater)
•Control source devices anywhere within 250 m, can be run
through walls and ceilings
•
Transmits infrared signals only
•
It allows the use of existing remote controls
•
Only one IR Receiver is needed
•
IR Receiver's frequency range is 30~50 kHz
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR OUT1
CIR03 IR Extender
IR OUT2IR OUT3
IR CAT5
DC 5V
2 31
1
IR OUT1/2/3
Connect to the supplied IR blaster cables (up to 2 meters) for IR
signal transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
IR OUT1
CIR03 IR Extender
IR OUT2 IR OUT3
2IR CAT5
Connect to the IR receiver with a CAT5 cable.
3DC 5V
Plug the supplied 5 V DC power supply into the unit and connect
the adaptor to an AC wall outlet.
Note: Connect the supplied power adapter to the IR repeater
only. The two units can be used at the same time via a single
power supply.
4
6.2 Receiver Front and Rear Panels
IR IN
CIR12 IR Repeater
IR OUT1IR OUT2
IR CAT5
DC 5V
31 2 4
1
IR IN
Connect to the supplied IR extender cable (up to 2 meters) for IR
signal reception. Ensure that the remote being used is within the
direct line-of-sight of the IR extender.
2
IR OUT1/2
Connect to the supplied IR blaster cables (up to 2 meters) for IR
signal transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
IR IN
CIR12 IR Repeater
IR OUT1 IR OUT2 IR IN
CIR12 IR Repeater
IR OUT1 IR OUT2
3
IR CAT5
Connect to the IR transmitter with a CAT5 cable.
4
DC 5V
Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC wall outlet.
AC
Outlet
IR RepeaterIR Extender
CAT5 Cable
Max. Length 250 m
IR CAT5
DC 5V
IR CAT5
DC 5V
IR CAT5
A
IR CAT5
A
Note: Please note that when plugging in the blaster and extender
cable incorrectly may damage or burn both the cables.
5
6.3 IR Cable Pin Denition
3
1
2
3
1
2
Power 5 V
IR Blaster Signal
NC
IR Signal
Power 5 V
Grounding
IR Extender
IR Blaster
6.4 IR Phone Jack Pin Denition
SCHEMATIC
3
1
123
2
1. Ring Spring
2. Tip Spring
3. Earth Spring
6
6.5 IR IN Pin Assignment
PIN ASSIGNMENT
1 (Ring spring) Power 5V
2 (Tip spring) IR signal
3 (Earth spring) GND
6.6 IR OUT Pin Assignment
PIN ASSIGNMENT
1 (Ring spring) IR Blaster Signal
2 (Tip spring) Power 5V
3 (Earth spring) IR Blaster signal
6.7 RJ45 Pin Assignment
PIN ASSIGNMENT
1GND
2GND
3GND
4IR Blaster Signal
5IR Blaster Signal
6GND
7Power
8Power
8
8. SPECIFICATIONS
Transmitter
Input Port 1×CAT5e
Output Ports 3×IR Blaster
Receiver
Input Port 1×IR Extender
Output Ports 2×IR Blaster, 1×CAT5
Power Supply 5 V/1 A DC (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body model:
±10 kV (air-gap discharge)
±6 kV (contact discharge)
Dimensions 62 mm(W) ×50 mm (D) ×23 mm (H)/each
Weight 78 g/each
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0 °C~40 °C / 32 °F~104 °F
Storage Temperature −20 °C~60 °C/−4 °F~140 °F
Power Consumption 0.5 W
Relative Humidity 20~60 % RH (non-condensing)
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5 Category 5 Cable
DC Direct Current
GND Ground
IR Infrared
Table des matières
Autres manuels CYP Extenseur
CYP
CYP CIR-03 Manuel utilisateur
CYP
CYP DCT-32TX Manuel utilisateur
CYP
CYP CH-506TX Manuel utilisateur
CYP
CYP PU-1103 Manuel utilisateur
CYP
CYP PU-506-KIT Manuel utilisateur
CYP
CYP CH-1107EX Manuel utilisateur
CYP
CYP CH-506TXPL Manuel utilisateur
CYP
CYP CLUX-SDI2OF Manuel utilisateur
CYP
CYP PU-507TX-HDVGA Manuel utilisateur
CYP
CYP PUV-1250PL-TX Manuel utilisateur
CYP
CYP PU-507-KIT Manuel utilisateur
CYP
CYP IP-7000RX Manuel utilisateur
CYP
CYP PU-USBX Manuel utilisateur
CYP
CYP PU-IR01 Manuel utilisateur
CYP
CYP IP-6000TXRX Manuel utilisateur
CYP
CYP CH-506TXPLBD Manuel utilisateur
CYP
CYP CDVI-513TXL Manuel utilisateur
CYP
CYP CH-506TXPLRXPL Manuel utilisateur
CYP
CYP CH-514RXL Manuel utilisateur
CYP
CYP CH-1529TX Manuel utilisateur
