CYP CH-710TX Manuel utilisateur
Operation Manual
Operation Manual
USB 2.0 Extender
CH-710TX / CH-710RX
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of
the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for sucient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/12/22 Preliminary release
CONTENTS
1. Introduction...................................................... 1
2. Applications ..................................................... 1
3. Package Contents ........................................... 1
4. System Requirements..................................... 1
5. Features............................................................ 2
6. Operation Controls and Functions ................ 3
6.1 Transmitter’s Front & Rear Panel ................ 3
6.2 Receiver’s Front & Rear Panel.................... 4
7. Connection Diagram ....................................... 5
8. Specications .................................................. 6
8.1 Technical Specications .............................. 6
8.2 Cable Specications.................................... 8
9. Acronyms ......................................................... 9
1
1. INTRODUCTION
This compact and low cost USB 2.0 Extender set is designed to expand
the usability and exibility of the most prevalent interface standard used
nowadays, USB. This extender provides a simple and ecient way to extend
the USB 2.0 connection from a typical host, such as a PC or laptop, to up
to 4 standard USB devices located as far as 50 meters away. It extends the
high quality data stream over single Cat.5e (or better) cable, with full support
for the entire range of USB 2.0 compliant products and data formats. The
receiver can supply up to 2A of total power (500mA per port) to devices
connected to the 4 USB Type-A ports.
2. APPLICATIONS
• Remote USB extension
• Security and monitoring
• Industrial Control
• Conference room and boardroom KVM Extension
3. PACKAGE CONTENTS
• 1× USB 2.0 Extender Transmitter
• 1× USB 2.0 Extender Receiver
• 1× 5V/3A DC Power Adapter
• 1× Operation Manual
4. SYSTEM REQUIREMENTS
• The use of industry standard Cat.6, Cat.6A or Cat.7 cable is highly
recommended.
2
5. FEATURES
• Convenient point-to-point USB 2.0 extension with 4 port hub
• 1 host port on the transmitter and 4 device ports on the receiver
• Supports standard USB 2.0 devices, such as a mouse and keyboard,
as well as those requiring isochronous transfers such as webcams and
portable storage
• Supplies up to 2A of power to the 4 USB ports (500mA per port)
• Low RF emission and robust noise immunity
• Simple plug-and-play operation, no drivers required
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter’s Front & Rear Panel
Front Rear
USB
CAT5e/6A/7 OUT
12
USB
CAT5e/6A/7 OUT
12
1USB Port: Connect directly to a USB host such as a PC or laptop to
extend their USB functionality to devices connected to the USB ports on
the currently connected receiver.
2CAT 5e/6A/7 OUT Port: Connect to a compatible receiver with a single
cable for transmission and reception of all data signals.
Note: This unit is directly powered by the connected receiver.
4
6.2 Receiver’s Front & Rear Panel
Front Rear
USB 2.0
DC 5V CAT5e/6A/7 IN
123
USB 2.0
DC 5V CAT5e/6A/7 IN
123
1USB 2.0 Ports: Connect directly to standard USB devices such as a
mouse, keyboard or ash drive to extend their USB functionality to the
host currently connected to the transmitter’s USB port.
Note: Each port can provide up to 500mA power.
2DC 5V Port: Plug the 5V DC power adapter into this port and connect it
to an AC wall outlet for power.
3CAT 5e/6A/7 IN Port: Connect to a compatible transmitter with a single
cable for transmission and reception of all data signals.
Note: Power is also provided to the connected transmitter.
5
7. CONNECTION DIAGRAM
USB
CAT5e/6A/7 OUT
USB 2.0
DC 5V CAT5e/6A/7 IN
TX
RX
PC/Laptop
WebcamUSB Storage
Power
Supply
USB
Input
USB
Output
USB
Devices
LAN
Cable
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CYP Extenseur
CYP
CYP PUV-1530TXRX Manuel utilisateur
CYP
CYP CIR-03 Manuel utilisateur
CYP
CYP PU-507TX-HDVGA Manuel utilisateur
CYP
CYP PU-1106-KIT Manuel utilisateur
CYP
CYP PU-506-KIT Manuel utilisateur
CYP
CYP PU-515PL-TX Manuel utilisateur
CYP
CYP CDVI-513TXL Manuel utilisateur
CYP
CYP PU-1103 Manuel utilisateur
CYP
CYP CH-506TXPLRXPL Manuel utilisateur
CYP
CYP CH-1106TX & RX Manuel utilisateur
CYP
CYP CH-1529TX Manuel utilisateur
CYP
CYP CA-USBLT Manuel utilisateur
CYP
CYP PRO-3GSDIHDMI Manuel utilisateur
CYP
CYP PUV-2000TX Manuel utilisateur
CYP
CYP SDV-FTX Manuel utilisateur
CYP
CYP PU-513L-KIT Manuel utilisateur
CYP
CYP CH-1107EX Manuel utilisateur
CYP
CYP CDVI-1109TXC Manuel utilisateur
CYP
CYP PU-232 Manuel utilisateur
CYP
CYP PU-607BDWP-TX Manuel utilisateur
