CYP QU-8-4K22 Manuel utilisateur
QU-8-4K22
1 to 8 HDMI Distribution Amplier
(4K, HDCP2.2, HDMI2.0)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 08/11/2016 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
7. Connection Diagram .......................... 10
8. Specications...................................... 11
8.1 Technical Specications ........................11
8.2 Supported Resolutions..........................12
6
1. INTRODUCTION
The QU-8-4K22 Distribution Amplier (splitter) accepts one HDMI input
and splits this signal to eight identical outputs. This device supports 4K2K
Ultra-High Denition video with HDMI2.0 and HDCP2.2 compliance.
In addition, 3D Video signals and High Denition Audio formats such as
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD
Master Audio, audio sampling rate up to 192kHz are also supported. Each
buered output can run 1080p/8-bit up to 20 metres and can also be
cascaded up to 3 layers..
2. APPLICATIONS
Lecture Room/Hall Presentation
Show Room/Demo Room
Public Commercial Display
3. PACKAGE CONTENTS
1 by 8 HDMI splitter
5V/3A DC Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-Box
or any 6G with HDCP2.2 source.
And output with 6G HDMI TV/Display and or audio amplier with
connection cables.
Note: To achieve 6G performance Premium High Speed HDMI Cables are
recommended.
7
5. FEATURES
HDMI 2.0, HDCP 2.2 and DVI compliant
HDMI 1 to 8 HDMI splitter
Supports UHDTV resolutions up to 4K2K:
3840×2160@24/25/30/50/60Hz & 4096×2160 @24/25/30/60Hz
Supports passthrough of high denition audio: LPCM 2/5.1/7.1CH,
Dolby Digital 2/5.1CH, DTS 2/5.1CH, Dolby TrueHD, DTS-HD Master
Audio & Dolby Atmos
Supports System Reset function (CEC active source command) allows
the unit to reset the TV to its default HDMI input automatically
HDMI input supports 'Standard' mode and 'TV' mode EDID settings
Input and output status are indicated on the front panel
Note: To active HDR function, input source and output device should also
support HDR function.
When displaying HDMI 4K2K signal, equivalent source signal, output
display and HDMI cables are required in order to secure the best image
display.
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2 3 4 5
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
EDID
STD TV
SYS-RST
ON OFF
1 3
2
1EDID: Switch the dip switch to choose EDID mode to Standard (STD)
or TV mode. When on TV mode, the unit will automatically detect and
store output 1 sink EDID data. Switch to STD mode, the unit will set to
standard at 1080p and audio standard at PCM 2 channel.
2OUTPUT 1~5: Connect to 6G HDMI TV / display or HD amplier for
output display.
3SYS-RST: Switch the dip switch from o to on, the unit will trigger TV
to its HDMI input1 immediately, when stays in on, the unit will trigger
the system in every 8~10 minutes. (*The purpose of this function is
to guarantee all outputs are displaying the corresponding image. For
example, at the display side user may switch to dierent HDMI input
or select other sources and this reset function will force the display to
switch back to its HDMI input1. TV/displays shall support CEC function
in order to perform this function successfully.)
9
6.2 Rear Panel
6 7 81
OUTPUT OUTPUT INPUT OUTPUTSERVICE SYNC POWER
DC 5V
1 3 4 22 65
1SERVICE: This is reserved for rmware update use only.
2OUTPUT 6~8: Connect to HDMI 6G TV/display or HD amplier for
output signal display.
3SYNC: When input detected, the LED will illuminate, the LED will
icker when detected abnormal, for example, when source signal not
stabled. When input is not connected, the LED light will be o.
4INPUT: Connect with 6G HDMI source equipment such as Blue-ray/
PS4 players and or PC/Laptop devices.
5Power: This LED will illuminate when the device is connected to an
active power supply.
6DC 5V: Connect the adapter included in the package and connect to
AC wall outlet for power supply.
10
7. CONNECTION DIAGRAM
1 2 3 4 5
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
EDID
STD TV
SYS-RST
ON OFF
+
6 7 81
OUTPUT OUTPUT INPUT OUTPUTSERVICE SYNC POWER
DC5V
Simultaneous
HDMI OUT
6G HDMI TV/Display 6G HDMI TV/Display
6G HDMI TV/Display
6G HDMI TV/Display
Projector
Projector Projector
Blu-Ray/PS4Player
Projector
Power
Supply
Simultaneous
HDMI Outputs
HDMI
Input
Table des matières
Autres manuels CYP Amplificateur
CYP
CYP QU-110S-4K22 Manuel d'installation
CYP
CYP AU-A300 Manuel utilisateur
CYP
CYP QU-128 Manuel utilisateur
CYP
CYP QU-18S Manuel utilisateur
CYP
CYP QU-12S Manuel utilisateur
CYP
CYP QU-DP13EX Manuel utilisateur
CYP
CYP CMPRO-4H2H Manuel utilisateur
CYP
CYP EHD-8 Manuel utilisateur
CYP
CYP CPRO-UHH Manuel utilisateur
CYP
CYP PU-Q1C4H Manuel utilisateur
CYP
CYP QU-14S Manuel utilisateur
CYP
CYP CS-PM Manuel utilisateur
CYP
CYP CDB-6HP Manuel utilisateur
CYP
CYP CHDD-8C Manuel utilisateur
CYP
CYP CPLUS-V4H4HP Manuel utilisateur
CYP
CYP AU-A50 Manuel utilisateur
CYP
CYP CDB-6HP Manuel utilisateur
CYP
CYP AU-A300 Manuel utilisateur
CYP
CYP QU-4M Manuel utilisateur
CYP
CYP QU-12S-4K22 Manuel utilisateur
