Creality ENDER-3 V2 Manuel utilisateur
USER MANUAL
CREALITY ENDER-3 V2 3D PRINTER
V1.0 Jul 2020
01
Contents
I. Welcome
II. NOTICES
III. Printer Components
IV. Parts Identification
V. ASSEMBLY
VI. CONTROLING THE PRINTER
VII. PREPARING FOR USE
VIII. PRINTING YOUR OWN MODELS - SLICERS
IX. MAINTENANCE
X. PROBLEM SOLVING
02
04
06
07
09
19
23
29
31
38
......................................................................................................................................
.....................................................................................................................................
................................................................................................................
................................................................................................................................
...............................................................................................
..........................................................................................................
...................................................................
.......................................................................................................................
...............................................................................................................
.................................................................................................................
02
I. Welcome
Thank you for purchasing the Creality Ender 3 V2 3D Printer from SainSmart.
This Ender-3 V2 3D Printer User Guide is designed to aid Ender-3 V2 users in the assembly and use of their new printer and to help
in getting started with 3D Printing. Even if you are familiar with 3D printing technology, we still recommend that you read through this
user manual, as there is a lot of important information about the Ender-3 V2 for you to get a better 3D printing experience.
Support:
● Documentation like this user manual, help guide etc. can be found on https://docs.sainsmart.com/
● For technical support, please email us at [email protected].
● Help and support is also available from our Facebook group. (SainSmart 3D Printing User Group)
Scan QR code
to join the group
03
Basic Specifications
Model
Print Size
Printing Method
Number of Nozzles
Recommended Layer Thickness
Stock Nozzle Diameter
XY Axis Precision
Filament Diameter
File Format
Connectivity
Compatible Slicers
Power Specification
Total Power
Build Plate Temperature
Nozzle Temperature
Resume Printing
Filament Sensor
Dual Z-axis Screws
Language
Operating System
Print Speed
Ender-3 V2
220 x 220 x 250mm. (Build Plate size 235 x 235mm)
FDM (Fused Deposition Modelling)
1
0.1mm - 0.4mm
0.4mm
±0.2mm
Φ1.75mm
.gcode (see your slicer software for supported model formats)
Micro SD Card / USB
Cura, 3D Creator Slicer, Repetier-Host, Simplify3D and more
Input: AC 115/230V 50/60Hz Output: DC 24V
350W
≤100°C
≤250°C
Yes after Manual pause or Power failure
No
No
English / Chinese
Marlin. Slicers are available for Windows XP/Vista/7/10/Mac OS/Linux
≤180mm/s, Normally operation is 30-60mm/s.
04
II. NOTICES
Please read all the instructions in the manual and familiarize yourself with the Ender-3 V2 3D Printer User Manual before setting-up
and using your 3D printer
PLEASE FOLLOW ALL THE SAFETY WARNINGS AND NOTICES.
Failure to comply with the warnings and instructions may result in individual injury, inferior results and printer damage.
1. Work Environment and Safety
Keep your workplace tidy. Do not operate the 3D Printer in the presence of flammable liquids, gas or dust.
The printer should be placed out of the reach of children or pets.
Only operate your 3D printer in room temperatures of 5-30℃ with an ambient humidity between 20%-70%
2. Electrical Safety
● Always use a properly grounded outlet and the cable provided to prevent damage to your printer.
● Please unplug the 3D Printer if it will not be in use for a while.
● Do not use outdoors, indoor use only.
● Always keep the printer in a dry environment and out of direct sunlight.
● Do not use the 3D Printer during thunderstorms.
3. Personal Safety
● Do keep your hair, clothing and gloves away from moving parts.
● Do not operate the 3D Printer while you are tired or under the influence of drugs, alcohol or medication.
● Parts of the 3D printer will get very hot during use, Do not touch the nozzle, hot end assembly or the build plate when the printer
is warming up, printing or cooling down.
● Ensure you keep others, especially children and pets away from the printer.
05
4. CAUTION!
● Do not leave the 3D Printer unattended.
● Do not make any modifications to the printer other than any approved SainSmart upgrades.
● When removing a model be careful not to use excessive force.
● The 3D printer must only be operated in a well ventilated area, noxious gasses can be released.
● Do not exceed the maximum print temperature of your printer or the filament you are using.
● When loading or unloading filament make sure the printer nozzle is well clear of the build plate (>50mm).
5. Filament and storage
● Follow any recommendations of your filament manufacturer.
● Do not use your printer to make anything that will come into contact with food unless specifically allowed by the filament manufacturer.
● Filament should be stored in clean and dry conditions. Filaments will absorb moisture and degrade over time if not kept dry.
● Do not open the filament from it’s sealed package until it is needed.
06
III. Printer Components
1
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
11
12
13
14
17
18
19
20
21
22
23
15 16
X and E-axis Assembly
X-axis Limit Switch
Printing Platform with Glass Bed and clips.
Y-axis belt Tensioner
Tool Box
Nozzle Assembly
Filament Spool Holder
Z-axis Roller Bracket Assembly
10
11
12
13
14
15
16
17
19
20
21
22
23
18
X-axis belt Tensioner
Screen
Rotary and press Switch
Machine Base
Power Supply
Voltage Selector
Y-axis Limit Switch
Y-axis Motor
Extruder Knob
E-axis Motor
X-axis Motor
Coupling
Z-axis Limit Switch
Z-axis Motor
Power Switch and Socket
07
IV. Parts Identification
1234
5 6 7 8
Printer Base x 1 Display Assembly x 1 Nozzle Assembly x 1
910 11
Z-axis Profile
(left) x 1
Z-axis Profile
(right) x 1 Gantry Profile x 1 12 X-axis Profile x 1 13 Lead Screw x 1
Z-axis Roller Bracket
Assembly
X-axis Tensioner x 1 Z-axis Motor Assembly x 1 Z-axis Limit Switch
Assembly x 1 XE-axis Assembly x 1
08
14 Filament Holder
Upright x 1 15 Filament Holder
Pipe and Nut x 1 16 2020 Profile
Cover x 2 17 Drive Belt x 1
18 Metal
Scraper x 1 19 Diagonal
Cutters x 1 20 Cable Tie x 1 21 Needle x 1
22 SD Card and
Card Reader x 1 23 Bowden Tube
Connector x 2 24 Power
Cable x 1
34 Extruder
Knob x 1 35
Hexagon Socket
Countersunk Head
Screw (black)
M4X14 x 1 36 Nozzle x 1
25 Wrenches and
Screwdrivers x 1
30 M5T Nut x 2 31
Hexagon Socket
Head Spring Washer
Combination Screw
M5X45 x 5 32
Hexagon Socket
Flat Round Head
Spring Washer
Combination 33 Filament x 1
26 Joint Claw x 2 27
Hexagon Socket
Flat Round Head
Screw M5X8 x 2
28
Hexagon Socket
Countersunk Head
Screw M4X18 x 2 29 Hexagon Socket
Head Spring Washer
Combination Screw
Please make sure all the above parts are included. If you are missing any part or have any questions, please email us at
09
V. ASSEMBLY
1. Install Z-axis Limit Switch Assembly and Z-axis Profiles
Short
1
1
Printer Base x 1
9
9
10
10
Z-axis Profile
(left) x 1
Z-axis Profile
(right) x 1
7
7
31
31
Hexagon Socket
Head Spring Washer
Combination Screw
M5X45 x 5
Z-axis Limit Switch
Assembly x 1
● Slide the Z axis limit switch onto the Z-axis Profile (left) as in the picture above and
loosely tighten. Then use four M5X45 screw to fix the Z-axis profiles to the base.
● Slide the Z axis limit switch down until it touches the base profile and tighten the bolts.
Autres manuels pour ENDER-3 V2
1
Table des matières
Autres manuels Creality Imprimante 3D
Creality
Creality ENDER-3 V2 Manuel utilisateur
Creality
Creality Ender-3 Manuel utilisateur
Creality
Creality CR-5 Manuel utilisateur
Creality
Creality CR-30 Manuel utilisateur
Creality
Creality Sonic Pad Manuel utilisateur
Creality
Creality CR-10 Series Manuel utilisateur
Creality
Creality LD-006 Manuel utilisateur
Creality
Creality CR20Pro Manuel
Creality
Creality HALOT-ONE PRO Manuel utilisateur
Creality
Creality K1 Manuel utilisateur
Creality
Creality CR-Scan Ferret 3D Pro Manuel utilisateur
Creality
Creality CR-200B Pro Manuel utilisateur
Creality
Creality K1 Max Manuel utilisateur
Creality
Creality CR-10 Smart Manuel utilisateur
Creality
Creality Ender-3 Manuel utilisateur
Creality
Creality CR-10 S5 Manuel utilisateur
Creality
Creality CR-M4 Manuel utilisateur
Creality
Creality Ender-3 Manuel utilisateur
Creality
Creality CREALITY BOX Manuel utilisateur
Creality
Creality CR-10 Smart Pro Manuel utilisateur
