CORNING Matribot Bioprinter Manuel utilisateur

What you need to know to get started with your

demonstration

All information and documents can be found at

www.corning.com/matribotguidelines.

Refer to the Corning Matribot Bioprinter Demonstration

Equipment Instructions (CLS-AN-670DOC) which provides

information on the unpacking, repacking, and returning of the

Matribot Bioprinter. Please note that the return shipping label is

included in the consumables supply box. Please keep this for the

return of the unit.

Corning®Matribot®Bioprinter

Demonstration Equipment

Quick Start Guide

Scan the QR codes below to access the following documents:

Corning Matribot Bioprinter

Instruction Manual

Download Corning Matribot Bioprinter

Software – Corning DNA Studio

Corning Matribot Bioprinter

Parameters

For detailed instructions, refer to the

Corning Matribot Bioprinter Instruction

Manual (CLS-AN-641DOC).

Corning DNA Studio software enables

the management of experimental

design and bioprinting by adjusting

several parameters to optimize

dispensing volumes and printed

structures.

These parameters, located in the

Printhead tab in the Corning DNA Studio,

are explained in detail for both Droplet

Dispensing and Bioprinting projects.

This document also includes illustrations

demonstrating how adjusting these

parameters can resolve common printing

issues (CLS-AN-648).

Demo Protocols and Videos can be accessed by following scanning the QR codes below.

PDF Video PDF Video PDF Video PDF Video

Protocol 1: Mimicking Corning

Matrigel® matrix dispensing

into 96-well microplates using

Corning Pluronics sacrificial ink.

Protocol 2: Mimicking Corning

Matrigel matrix dispensing for

droplet arrays in 24-well plates

using Corning Pluronics

sacrificial ink.

Protocol 3: Printing in a dish

using Corning Start sacrificial

ink.

Protocol 4: Mimicking Corning

Matrigel matrix printing in a

dish from an SD card using

Corning Pluronics sacrificial ink.

How to Return the Corning® Matribot® Bioprinter

Please follow the complete instructions (pages 4 to 7) in the Corning Matribot Bioprinter Demonstration Equipment Instructions

(CLS-AN-670DOC).

Summary:

◗ At the end of the last experiment, before returning the bioprinter, use the knob to select Prepare Bioprint and select Home Axes. This

returns the printbed and printhead to the home position. Then, navigate to the Utilities menu and confirm that SD print is not enabled.

◗ Clean the Corning Matribot bioprinter according to the instructions (page 4) using >70% (v/v) ethanol. Spray the surface, and wipe with

a soft cloth while wearing gloves to avoid direct contact with the unit.

◗ Repack the Matribot Bioprinter according to the instructions (pages 4-6).

◗ The return shipping label is included in the consumables box. Please attach this to the shipping box once packaged.

◗ Please inform your local Corning Representative the demo has been completed and the Corning Matribot bioprinter is being returned.

For any questions, please contact a Corning representative.

For a listing of trademarks, visit www.corning.com/clstrademarks. All other trademarks are the property of their respective owners.

Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic

or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the

environment, where such organisms can be deleterious to humans or the environment. Corning Life Sciences makes no claims regarding the performance

of these products for clinical or diagnostic applications. *For a listing of US medical devices, regulatory classifications or specific information on claims, visit

www.corning.com/resources.

Corning’s products are not specifically designed and tested for diagnostic testing. Many Corning products, though not specific for diagnostic testing, can be

used in the workflow and preparation of the test at the customers discretion. Customers may use these products to support their claims. We cannot make any

claims or statements that our products are approved for diagnostic testing either directly or indirectly. The customer is responsible for any testing, validation,

and/or regulatory submissions that may be required to support the safety and efficacy of their intended application.

Corning Incorporated

Life Sciences

www.corning.com/lifesciences

NORTH AMERICA

t 800.492.1110

t 978.442.2200

ASIA/PACIFIC

Australia/New Zealand

t 61 427286832

Chinese Mainland

t 86 21 3338 4338

India

t 91 124 4604000

Japan

t 81 3-3586 1996

Korea

t 82 2-796-9500

Singapore

t 65 6572-9740

Taiwan

t 886 2-2716-0338

EUROPE

[email protected]

France

t 0800 916 882

Germany

t 0800 101 1153

The Netherlands

t 020 655 79 28

United Kingdom

t 0800 376 8660

All Other European Countries

t +31 (0) 206 59 60 51

LATIN AMERICA

[email protected]

Brazil

t 55 (11) 3089-7400

Mexico

t (52-81) 8158-8400

Autres manuels CORNING Équipement de laboratoire

CORNING

CORNING LSE 6775 Manuel utilisateur

CORNING

CORNING Matribot Bioprinter Manuel utilisateur

CORNING

CORNING Lambda EliteMax Manuel utilisateur

CORNING

CORNING Axygen MotoPet Manuel utilisateur

CORNING

CORNING Stripettor 4998 Manuel utilisateur

CORNING

CORNING Lambda EliteTouch Manuel utilisateur

CORNING

CORNING LSE 6785-SB Manuel utilisateur

CORNING

CORNING Axygen Axypet Pro Manuel utilisateur

CORNING

CORNING PC-170 Manuel utilisateur

CORNING

CORNING LSE Series Manuel utilisateur

CORNING

CORNING SCF-1296 Manuel utilisateur

CORNING

CORNING LSE 6755 Manuel utilisateur

CORNING

CORNING CamSplice FBC-017 Manuel utilisateur

CORNING

CORNING Everon 6000 Manuel utilisateur

CORNING

CORNING LSE 6783 Manuel utilisateur

CORNING

CORNING Axygen Axypet Manuel utilisateur

CORNING

CORNING Labnet Prism R Manuel utilisateur

CORNING

CORNING AXYGEN AxySpin R Manuel utilisateur

CORNING

CORNING LSE Manuel utilisateur

CORNING

CORNING Cell Counter Manuel utilisateur

CORNING

CORNING X-LAB 6917 Manuel utilisateur

CORNING

CORNING LSE 6875-SB Manuel utilisateur

CORNING

CORNING LSE 6775 - 120V US Manuel utilisateur

CORNING

CORNING Lambda EliteMax Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur