Cabletron Systems ESX-1320 Manuel utilisateur

7X 8X 9X 10X 11X 12X1X 2X 3X 4X 5X 6X

ESX-1320

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

ESX-1380

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

PORT 12

TXRX

PORT 11

TXRX

PORT 10

TXRX

PORT 9

TXRX

PORT 8

TXRX

PORT 7

TXRX

PORT 6

TXRX

PORT 5

TXRX

PORT 4

TXRX

PORT 3

TXRX

PORT 2

TXRX

PORT 1

TXRX

ESX-1320/ESX-1380

INSTALLATION GUIDE

ESX-1320/ESX-1380 Installation Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



Printed in the United States of America

Order Number: 9031574-03 November 1996

SecureFast Switch

SPECTRUM

LANVIEW

MicroMMAC

, and

BRIM

are registered

trademarks and

Element Manager

EPIM

EPIM-A

EPIM-F1

EPIM-F2

EPIM-F3

EPIM-T

EPIM-X

ESX-1320

ESX-1380

FOT-F

FOT-F3

HubSTACK

SEH

SEHI

, and

TMS-3

are

trademarks of Cabletron Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

Only qualiﬁed personnel should perform installation

procedures.

Printed on Recycled Paper

Notice

ii ESX-1320/ESX-1380 Installation Guide

DOC NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This equipment is in the 1st Class Category (information equipment to be used in commercial and/or

industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference

by Information Technology Equipment (VCCI) aimed at preventing radio interference in commercial

and/or industrial areas.

Consequently, when used in a residential area or in an adjacent area thereto, radio interference may be

caused to radios and TV receivers, etc.

Read the instructions for correct handling.

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOU ARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.

Notice

ESX-1320/ESX-1380 Installation Guide iii

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

Notice

iv ESX-1320/ESX-1380 Installation Guide

DECLARATION OF CONFORMITY

Application of Council Directive(s):

89/336/EEC

73/23/EEC

Manufacturer’s Name:

Cabletron Systems, Inc.

Manufacturer’s Address:

35 Industrial Way

PO Box 5005

Rochester, NH 03867

European Representative Name:

Mr. J. Solari

European Representative Address:

Cabletron Systems Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards:

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment:

Networking Equipment, for use in a

Commercial or Light

Industrial

Environment.

We the undersigned, hereby declare, under our sole responsibility, that the equipment packaged

with this notice conforms to the above directives.

Manufacturer Legal Representative in Europe

Mr. Ronald Fotino Mr. J. Solari

___________________________________ ___________________________________

Full Name Full Name

Principal Compliance Engineer Managing Director - E.M.E.A.

___________________________________ ___________________________________

Title Title

Rochester, NH, USA Newbury, Berkshire, England

___________________________________ ___________________________________

Location Location

ESX-1320/ESX-1380 Installation Guide v

CONTENTS

CHAPTER 1 INTRODUCTION

1.1 Using This Manual.......................................................................1-2

1.2 Features ......................................................................................1-2

1.3 Document Conventions...............................................................1-5

1.4 Related Manuals..........................................................................1-5

1.5 Getting Help.................................................................................1-6

CHAPTER 2 CONTROLS AND INDICATORS

2.1 LANVIEW LEDs...........................................................................2-1

2.2 RESET Button.............................................................................2-1

2.3 LCD Display.................................................................................2-2

2.4 Network Management Capabilities..............................................2-2

2.5 Simplex or Full Duplex Mode Operation......................................2-2

CHAPTER 3 INSTALLATION

3.1 Unpacking the ESX .....................................................................3-2

3.2 Removing the Chassis Cover......................................................3-3

3.3 Setting Mode Switches................................................................3-5

3.4 NVRAM Reset Switch..................................................................3-8

3.5 SIMM Upgrades...........................................................................3-9

3.5.1 Locating SIMMs..............................................................3-9

3.5.2 Installing SIMMs .............................................................3-9

3.6 BRIM Connection ......................................................................3-12

3.7 Installing the ESX......................................................................3-12

3.7.1 Tabletop or Shelf Installation ........................................3-13

3.7.2 Rackmount Installation .................................................3-14

3.7.3 Connecting to the Power Source..................................3-16

3.8 Pre-Network Installation Test ....................................................3-17

3.9 Connecting to the Network........................................................3-19

3.9.1 Connecting a Twisted Pair Segment to the ESX-1320.3-19

3.9.2 Connecting a 10BASE-F Segment to the ESX-1380....3-21

Contents

vi ESX-1320/ESX-1380 Installation Guide

CHAPTER 4 TROUBLESHOOTING

4.1 Using LANVIEW...........................................................................4-1

4.2 Troubleshooting Checklist............................................................4-4

4.3 Using the RESET Button .............................................................4-6

4.4 Using the LCD..............................................................................4-7

4.4.1 Unsaved Initialization Messages.....................................4-8

4.4.2 Static System Messages.................................................4-9

4.4.3 Alarm Messages............................................................4-11

4.4.4 Saved System Messages..............................................4-12

4.4.5 Failure or Error Messages.............................................4-14

APPENDIX A SPECIFICATIONS

A.1 Functionality................................................................................A-1

A.2 COM Port 1 and COM Port 2...................................................... A-1

A.3 Environmental Requirements......................................................A-2

A.4 Regulatory...................................................................................A-2

A.5 Physical Properties ..................................................................... A-2

A.6 Electrical Specifications .............................................................. A-2

APPENDIX B ETHERNET CABLING REQUIREMENTS

B.1 Network Requirements ...............................................................B-1

B.2 10BASE-T Twisted Pair Network................................................ B-1

B.3 Multimode Fiber Optic Network...................................................B-3

INDEX

ESX-1320/ESX-1380 Installation Guide 1-1

CHAPTER 1

INTRODUCTION

Welcome to the Cabletron Systems

ESX-1320/ESX-1380 Installation

Guide

for the ESX-1320 and ESX-1380

Ethernet Workgroup Switches.

This manual describes the ESX-1320 and ESX-1380 switches and

provides information concerning installation and troubleshooting.

The ESX-1320 and ESX-1380 Ethernet Workgroup Switches, shown in

Figure 1-1, are standalone network switch devices. Except for the

difference in the network media supported (ESX-1320, RJ45 Twisted Pair

ports and ESX-1380, Multimode Fiber Optic ST ports), the two ESX

switches are identical in operation.

Figure 1-1 ESX-1320 and ESX-1380 Switches

NOTE

Throughout this manual the term ESX refers to both switches,

the ESX-1320 and the ESX-1380. If the information applies to

only one of the switches, then that switch is referred to by its

model name, ESX-1320 or ESX-1380.

1574-01

7X 8X 9X 10X 11X 12X1X 2X 3X 4X 5X 6X

ESX-1320

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

ESX-1380

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

PORT 12

TXRX

PORT 11

TXRX

PORT 10

TXRX

PORT 9

TXRX

PORT 8

TXRX

PORT 7

TXRX

PORT 6

TXRX

PORT 5

TXRX

PORT 4

TXRX

PORT 3

TXRX

PORT 2

TXRX

PORT 1

TXRX

Chapter 1:

Introduction

1-2 ESX-1320/ESX-1380 Installation Guide

1.1 USINGTHIS MANUAL

You should have a general working knowledge of Ethernet or IEEE 802.3

type data networks and their physical layer components, prior to installing

the ESX. The following summarizes the organization of this manual.

Chapter 1,

Introduction

, provides instructions for using this manual,

product features, document conventions, related documents, and how to

contact Cabletron Technical Support.

Chapter 2,

Controls and Indicators

discusses the controls and

indicators for the ESX.

Chapter 3,

Installation

provides instructions required to unpack the

ESX, perform pre-installation testing, install the ESX, and connect the

ESX to the network.

Chapter 4,

Troubleshooting

, provides detailed troubleshooting

procedures for the ESX.

Appendix A,

Specifications

, contains information on functionality and

operating speciﬁcations, connector pinouts, environmental requirements,

and physical properties.

Appendix B,

Ethernet Cabling Requirements

, contains information on

general networking guidelines.

1.2 FEATURES

i960 RISC Processor Controlled

The ESX complies to the PLUS Architecture with Dual Intel i960 RISC

processors and provides advanced management capabilities such as

SNMP, RMON, and DLM. The ESX provides the option of using

Cabletron Systems Distributed LAN Monitor (DLM) software to locally

poll and monitor any SNMP or IP device.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cabletron Systems Changer

Cabletron Systems

Cabletron Systems SmartSTACK ELS10-27TX Manuel du propriétaire

Cabletron Systems

Cabletron Systems SmartCell 6A000 Manuel utilisateur

Cabletron Systems

Cabletron Systems Ethernet Hubs Manuel utilisateur

Cabletron Systems

Cabletron Systems 9F122-12 Manuel utilisateur

Cabletron Systems

Cabletron Systems FN100 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9G426-02 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 6500 Manuel utilisateur

Cabletron Systems

Cabletron Systems FN100 Manuel utilisateur

Cabletron Systems

Cabletron Systems SEHI-22 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9H531-24 Manuel utilisateur

Cabletron Systems

Cabletron Systems STHI Manuel utilisateur

Cabletron Systems

Cabletron Systems DLEHF-MA Manuel utilisateur

Cabletron Systems

Cabletron Systems SEHI SEHI100TX- Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9E312-12 Manuel utilisateur

Cabletron Systems

Cabletron Systems IA1100 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK 100 ELS100-16TX Manuel utilisateur

Cabletron Systems

Cabletron Systems IA1100 Instructions de montage

Cabletron Systems

Cabletron Systems MMAC-Plus 9H421-12 Manuel utilisateur

Cabletron Systems

Cabletron Systems MicroMMAC 22ES Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX150 Manuel utilisateur

Cabletron Systems

Cabletron Systems 6A000/ZX-250 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Instructions de montage

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 9A100 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur