Cabletron Systems 9F120-08 Document technique

9031372-01

SmartSwitch 9000

9F120-08 / 9F122-12 / 9F125-08

Local Management Appendix

Appendix

9F120-08 / 9F122-12 / 9F125-08

Module Speciﬁc Information

Introduction

This appendix contains local management information that is speciﬁc to the

9F120-08, 9F122-12 and 9F125-08 MicroLAN modules.

Default Interface Codes

The Default Interface ﬁeld on the General Conﬁguration Screen allows you to

enter a number (one through three). Each number represents a default interface

for the selected module. The table below lists the numbers you can enter, each

number’s corresponding interface, and a brief description of that interface. The

default for this ﬁeld is NONE, meaning no default interface selected.

Table 1. 9F12x-xx MicroLAN Module Default Interface Codes

Number Interface Description

1 SMB-1 1 mbps System Management Bus

2 SMB-10 10 mbps System Management Bus

3 FNB Flexible Network Bus (dual attached)

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

FNB Resource Conﬁguration Codes

All of the MicroLAN Modules described in this appendix physically attach to the

FNB-1 and the FNB-2 on the SmartSwitch 9000 backplane. By default, the module

inserts into four rings (the primary and secondary rings of the FNB-1 and the

FNB-2). The FNB Resource Conﬁguration Screen allows you to customize this

conﬁguration to your particular needs.

The FNB Resource Conﬁguration Screen allows you to:

• Select the rings (primary or secondary) of each FNB to which the module will

attach

• Determine whether the module will insert into those rings or bypass them

• Select the ring where the MAC will reside

The terms INSERT and BYPASS refer to relays that are located on the module.

INSERT causes a relay to connect the module’s front panel ports to the selected

ring. BYPASS causes a relay to disconnect the module’s front panel ports from the

selected ring.

INSERT:

BYPASS:

The FNB Resource Conﬁguration Screen lists all possible connections a module

can support on the FNB, displays the current connection, and allows you to

change the connection. Table 2 lists and describes the FDDI Connections from

which you can select.

Front FNB Ring

Relay

Panel

Ports

Front

Panel

Ports

FNB Ring

Relay

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes

Conﬁguration

ID FDDI Connections Description

1 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached, but not inserted, to

the primary ring on the FNB-1. The module is

attached, but not inserted, to the primary ring

on the FNB-2. The MAC resides on FNB-1.

2 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

3 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-1.

4 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

5 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

6 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

7 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

8 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

10 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

11 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

12 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

13 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

14 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

15 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

16 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

17 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

18 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

19 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

20 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

21 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

22 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

23 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

24 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

25 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

26 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

27 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

28 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

29 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

30 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

31 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

32 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cabletron Systems Changer

Cabletron Systems

Cabletron Systems MMAC-Plus 9H531-24 Manuel utilisateur

Cabletron Systems

Cabletron Systems 6H122-16 Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX1200 Manuel utilisateur

Cabletron Systems

Cabletron Systems SEH-22 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur

Cabletron Systems

Cabletron Systems Cabletron CyberSWITCH CSX5500 Mode d’emploi

Cabletron Systems

Cabletron Systems pmn Manuel utilisateur

Cabletron Systems

Cabletron Systems ATX Manuel utilisateur

Cabletron Systems

Cabletron Systems MicroMMAC 22ES Manuel utilisateur

Cabletron Systems

Cabletron Systems Fast Network 10 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9F310-02 Manuel utilisateur

Cabletron Systems

Cabletron Systems 9G421-02 Document technique

Cabletron Systems

Cabletron Systems 2H23-50R Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX1000 Manuel utilisateur

Cabletron Systems

Cabletron Systems SEH100TX-22 Manuel utilisateur

Cabletron Systems

Cabletron Systems MRXI 10BASE-T Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Document technique

Cabletron Systems

Cabletron Systems MMAC-Plus 9G426-02 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Instructions de montage

Cabletron Systems

Cabletron Systems SmartCell ZX-250 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9E312-12 Document technique

Cabletron Systems

Cabletron Systems 9F426-03 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9F206-02 Document technique

Cabletron Systems

Cabletron Systems MRXI-22 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur