Cabletron Systems SmartSwitch 9A100 Manuel utilisateur

SmartSwitch 9A100

User Guide

35 Industrial Way

Rochester, NH 03866

USA

(603) 332-9400

Part Number 04-0049-01 Rev. A

Order Number 9032628

ii SmartSwitch 9A100 User Guide

NOTICE

Cabletron Systems reserves the right to make changes in specifications and other information contained in this

document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any

such changes have been made. The hardware, firmware, and software described in this manual are subject to change

without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,

OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS)

ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED IN IT, EVEN IF

CABLETRON SYSTEMS HAS BEEN ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE

POSSIBILITY OF SUCH DAMAGES.

Printed in the United States of America

SmartSwitch 9A100 User Guide

Part Number: 04-0049-01 Rev. A

Order Number: 9032628

SmartCell, SmartSwitch, SPECTRUM, LANVIEW, MicroMMAC, and BRIM are registered trademarks and Element

Manager, EPIM, EPIMA, EPIM-F1, EPIM-F2, EPIM-F3, EPIM-T, EPIM-X, FOT-F, FOT-F3, HubSTACK, SEH,

SEHI, and TMS-3 are trademarks of Cabletron Systems, Inc. All other product names mentioned in this manual may

be trademarks or registered trademarks of their respective companies.

SmartSwitch 9A100 User Guide iii

FCC CLASS A NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

2p›F 0…ˆÃÊiµÖˆ«“i˜ÍÊ…>ÃÊLii˜ÊÍiÃÍi`Ê>˜`ÊvœÖ˜`ÊÍœÊVœ“«•ßÊÝˆÍ…ÊÍ…iÊ•ˆ“ˆÍÃÊvœÀÊ>Ê+•>ÃÃÊ"Ê

`ˆ}ˆÍ>•Ê`iÜˆVi]Ê«ÖÀÃÖ>˜ÍÊÍœÊ+>ÀÍÊ£xÊœvÊÍ…iÊ4++ÊÀÖ•iÃ°Ê0…iÃiÊ•ˆ“ˆÍÃÊ>ÀiÊ`iÃˆ}˜i`ÊÍœÊ

«ÀœÜˆ`iÊÀi>Ãœ˜>L•iÊ«ÀœÍiVÍˆœ˜Ê>}>ˆ˜ÃÍÊ…>À“vÖ•Êˆ˜ÍiÀviÀi˜ViÊÝ…i˜ÊÍ…iÊiµÖˆ«“i˜ÍÊˆÃÊ

œ«iÀ>Íi`Êˆ˜Ê>ÊVœ““iÀVˆ>•Êi˜ÜˆÀœ˜“i˜Í°Ê0…ˆÃÊiµÖˆ«“i˜ÍÊÖÃiÃ]Ê}i˜iÀ>ÍiÃ]Ê>˜`ÊV>˜Ê

À>`ˆ>ÍiÊÀ>`ˆœÊvÀiµÖi˜VßÊi˜iÀ}ßÊ>˜`]ÊˆvÊ˜œÍÊˆ˜ÃÍ>••i`Êˆ˜Ê>VVœÀ`>˜ViÊÝˆÍ…ÊÍ…iÊ

.“>ÀÍ.ÝˆÍV…Ê™"£ääÊ2ÃiÀÊ5Öˆ`i]Ê“>ßÊV>ÖÃiÊ…>À“vÖ•Êˆ˜ÍiÀviÀi˜ViÊÍœÊÀ>`ˆœÊ

Vœ““Ö˜ˆV>Íˆœ˜Ã°Ê#«iÀ>Íˆœ˜ÊœvÊÍ…ˆÃÊiµÖˆ«“i˜ÍÊˆ˜Ê>ÊÀiÃˆ`i˜Íˆ>•Ê>Ài>ÊˆÃÊ•ˆŽi•ßÊÍœÊV>ÖÃiÊ

ˆ˜ÍiÀviÀi˜Vi]Êˆ˜ÊÝ…ˆV…ÊV>ÃiÊÍ…iÊÖÃiÀÊÝˆ••ÊLiÊÀiµÖˆÀi`ÊÍœÊVœÀÀiVÍÊÍ…iÊˆ˜ÍiÀviÀi˜ViÊ>ÍÊ…ˆÃÊ

œÝ˜ÊiÞ«i˜Ãi°

2p›F +…>˜}iÃÊœÀÊ“œ`ˆvˆV>Íˆœ˜ÃÊ“>`iÊÍœÊÍ…ˆÃÊ`iÜˆVi]ÊÝ…ˆV…Ê>ÀiÊ˜œÍÊiÞ«ÀiÃÃ•ßÊ>««ÀœÜi`ÊLßÊ

Í…iÊ«>ÀÍßÊÀiÃ«œ˜ÃˆL•iÊvœÀÊVœ“«•ˆ>˜Vi]ÊVœÖ•`ÊÜœˆ`ÊÍ…iÊÖÃiÀ½ÃÊ>ÖÍ…œÀˆÍßÊÍœÊœ«iÀ>ÍiÊÍ…iÊ

iµÖˆ«“i˜Í°

DOC CLASS A NOTICE

This digital apparatus does not exceed the Class A limits for radionoise emissions from digital apparatus set out in the

Radio Interference Regulations of the Canadian Department of Communications.

Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils

numeriques de la class A prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des

Communications du Canada.

iv SmartSwitch 9A100 User Guide

DECLARATION OF CONFORMITY

ADDENDUM

Application of Council Directive(s): 89/336/EEC

73/23/EEC

Manufacturer’s Name: Cabletron Systems, Inc.

Manufacturer’s Address: 35 Industrial Way

P. O. Box 5005

Rochester, NH 03866

Product Name: SmartSwitch 9A100

European Representative Name: Mr. J. Solari

European Representative Address: Cabletron Systems, Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment: Networking Equipment, for use ina Commercial or Light

Industrial Environment.

We the undersigned, hereby declare, under our sole responsibility, that the equipment packaged with this

notice conforms to the above directives.

Manufacturer: Full Name: Mr. Ronald Fotino

Title: Principal Compliance Engineer

Location: Rochester, NH. U.S.A.

Legal Representative in Europe: Full Name: Mr. J. Solari

Title: Managing Director - E.M.E.A.

Location: Newbury, Berkshire, England

SmartSwitch 9A100 User Guide v

SAFETY INFORMATION

CLASS 1 LASER TRANSCEIVERS

The 6A-IOM-29-4, 6A-IOM-29-4-IR, 6A-IOM-29-4-LR, 6A-IOM-39-1 and 6A-IOM-39-1-LR connectors use Class

1 Laser transceivers. Read the following safety information before installing or operating the 6A-IOM-29-4.

The Class 1 Laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop

eliminates the need for maintenance checks or adjustments. The output is factory set, and does not allow any user

adjustment. Class 1 Laser transceivers comply with the following safety standards:

U21 CFR 1040.10 and 1040.11 U. S. Department of Health and Human Services (FDA)

UIEC Publication 825 (International Electrotechnical Commission)

UCENELEC EN 60825 (European Committee for Electrotechnical Standardization)

When operating within their performance limitations, laser transceiver output meets the Class 1 accessible emission

limit of all three standards. Class 1 levels of laser radiation are not considered hazardous.

LASER RADIATION AND CONNECTORS

When the connector is in place, all laser radiation remains within the fiber. The maximum amount of radiant power

exiting the fiber (under normal conditions) is -12.6dBm or 55 x 10 -6 watts.

Removing the optical connector from the transceiver allows laser radiation to emit directly from the optical port. The

maximum radiance from the optical port (under worst case conditions) is 0.8 W cm-2 or 8 x 103W m-2 sr-1.

Do not use optical instruments to view the laser output. The use of optical instruments to view laser output increases

eye hazard. When viewing the output optical port, you must remove power from the network adapter.

vi SmartSwitch 9A100 User Guide

FIBER OPTIC PROTECTIVE CAPS

%"¤›apm READ BEFORE REMOVING FIBER OPTIC PROTECTIVE CAPS.

Cable assemblies and MMF/SMF ports are shipped with protective caps to prevent contamination. To avoid

contamination, replace port caps on all fiber optic devices when not in use.

Cable assemblies and MMF/SMF ports that become contaminated may experience signal loss or difficulty inserting

and removing cable assemblies from MMF/SMF ports.

Contamination can be removed from cable assemblies by

UBlowing surfaces with canned duster (Chemtronics p/n ES1270 or equivalent).

UUsing a fiber port cleaning swab (Alcoa Fujikura LTS p/n ACT-01 or equivalent) saturated with

optical-grade isopropyl alcohol, gently wipe the end surface of ferrules first; then wipe down the

sides of both ferrules.

UBlow ferrule surfaces dry with canned duster.

Contamination can be removed from MMF/SMF ports by

UUsing the extension tube supplied with canned duster, blow into the optical port, being careful not

to allow the extension tube to touch the bottom of the optical port.

UReconnect cable and check for proper mating. If problems remain, gently wipe out optical port with

a DRY fiber port cleaning swab and repeat step 1.

%"¤›apm To avoid contamination, replace port caps on all fiber optic devices when not in

use.

SmartSwitch 9A100 User Guide vii

REGULATORY COMPLIANCE SUMMARY

SAFETY

The SmartSwitch 9A100 meets the safety requirements of UL 1950, CSA C22.2 No. 950, EN 60950, IEC 950, and

73/23/EEC.

EMC

The SmartSwitch 9A100 meets the EMC requirements of FCC Part 15, EN 55022, CSA C108.8, VCCI V-3/93.01, EN

50082-1, and 89/336/EEC.

viii SmartSwitch 9A100 User Guide

REVISION HISTORY

Document Name: SmartSwitch 9A100 User Guide

Document Part Number: 04-0049-01 Rev. A

Document Order number: 9032628

Author: Carre Gibson

Editor: Ayesha Maqsood

Illustrator: Michael Fornalski

Date Revision Description

May 1998 04-0049-01 Rev. A Initial Release

SmartSwitch 9A100 User Guide ix

TABLE OF CONTENTS

1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

2 Switch Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1 Unpacking the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1.1 Check Accessory Carton Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.2 Inspecting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.2.1 DS3 and E3 I/O Module Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

2.3 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.4 Configuring the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

2.5 Using the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

2.5.1 Console Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

2.5.2 Console Time-out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

2.5.3 Creating an Alias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

2.5.4 Ambiguous Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

2.5.5 Console Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

2.6 SmartSwitch ATM Administrator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

2.6.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

2.6.2 Starting SmartSwitch ATM Administrator the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

2.6.3 Accessing Online Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

3 IP Over ATM and LANE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1 Creating an IP over ATM VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1.1 ATM Addressing for IP over ATM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

3.2 Creating an Emulated LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

3.2.1 ATM Addressing for LAN Emulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

3.2.2 ELANs Across Multiple Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

3.2.3 Switch Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

4 Switch Administration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.1 Backing Up and Restoring Switch Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

4.2 ATM Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4.2.1 Creating an IISP Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4.2.2 UNI Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

4.2.3 Route Metrics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

4.3 IP Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

4.4 Events and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.4.1 Event Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.4.2 Viewing Events and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

4.4.3 Deleting Events and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

x SmartSwitch 9A100 User Guide

TABLE OF CONTENTS

4.5 PVC Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

4.5.1 Point-to-Point PVCs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12

4.5.2 Point-to-Multipoint PVCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .4-13

4.5.3 Connecting to Local Switch Client Through a PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14

4.5.4 Non-zero VPIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-15

4.6 Traffic Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17

4.6.1 Traffic Descriptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17

4.6.2 Call Admission Control Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19

4.6.3 EFCI, EPD, and RM Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22

4.7 Upgrading and Changing Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23

4.7.1 Accessing the Boot Load Prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23

4.7.2 Boot Load Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24

4.7.3 Upgrading Boot Load Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-25

4.7.4 Upgrading POST Diagnostic Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-27

4.7.5 Upgrading Switch Operating Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-28

4.7.6 Using the Update Firmware Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-29

4.8 Saving Core Dumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-30

5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

5.1 Troubleshooting IP over ATM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

5.2 Troubleshooting LAN Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

5.3 Troubleshooting PNNI Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

5.4 Troubleshooting Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4

5.4.1 Diagnosing Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4

5.4.2 Global Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4

5.4.3 Port Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

A.1 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

A.2 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

B Agent Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

B.1 MIB, SMI, MIB Files and Internet MIB Hierarchy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

B.1.1 ZeitNet Cabletron Proprietary MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

B.1.2 Relation Between Object Identifier and the Represented Value . . . . . . . . . . . . . . . . . . . . . . . . . B-3

B.1.3 Supported protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

B.1.4 Supported SMI Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

B.1.5 Zeitnet Cabletron Proprietary MIB Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

B.1.6 SmartSwitch 9A100 MIB Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

B.1.7 MIB Exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

B.2 Managing the SmartSwitch 9A100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7

B.2.1 Console Commands that Affect the Agent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

C Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

C.1 Telephone Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

C.2 FAX Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Autres manuels pour SmartSwitch 9A100

Table des matières

Autres manuels Cabletron Systems Changer

Cabletron Systems

Cabletron Systems 2H23-50R Manuel utilisateur

Cabletron Systems

Cabletron Systems FN100 Manuel utilisateur

Cabletron Systems

Cabletron Systems MicroMMAC 22ES Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ETHERNET ELS10-27 Manuel utilisateur

Cabletron Systems

Cabletron Systems 2E48-27R Manuel utilisateur

Cabletron Systems

Cabletron Systems Ethernet Hubs Manuel utilisateur

Cabletron Systems

Cabletron Systems 9A426-02 Manuel utilisateur

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems 9E423-36 Manuel utilisateur

Cabletron Systems

Cabletron Systems ESXMIM Manuel utilisateur

Cabletron Systems

Cabletron Systems MRXI 10BASE-T Manuel utilisateur

Cabletron Systems

Cabletron Systems 6C105 Manuel utilisateur

Cabletron Systems

Cabletron Systems MRX Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSwitch CSX7000 Manuel utilisateur

Cabletron Systems

Cabletron Systems 7C04 Workgroup SmartSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems 9F426-03 Manuel utilisateur

Cabletron Systems

Cabletron Systems 9E133-36 Manuel utilisateur

Cabletron Systems

Cabletron Systems SEHI-22FL Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9EX02-12 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK STS16-20RM Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 04-0053-01 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Document technique

Cabletron Systems

Cabletron Systems 9F426-02 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 1800 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur