Boya BY-CM6A Manuel utilisateur
General Introduction
Cautions
Package Contents
Thanks for choosing BOYA!
• BY-CM6A Microphone
• USB-A to USB-C Cable (1.2m)
• Lens Cap with Lanyard
The BOYA BY-CM6A is a desktop USB microphone with a built-in camera
and an LED ring light. It is compatible with Windows and Mac comput-
ers, ideal for live streaming, video conferencing, vocal performance, and
more.
With a cardioid pickup pattern, the BY-CM6A is designed to capture
sound in front of the microphone and effectively reduce unwanted
background noise. The built-in camera provides crisp, clear images with
an HD resolution of 1080p at 30fps.
The BOYA BY-CM6A features built-in controls for gain, headphone
volume and muting, while the 3.5mm headphone jack enables real-time
monitoring. An LED ring light surrounds the camera, providing even
illumination for the user. Finally, an adjustable desktop stand allows you
to adjust the microphone to the desired angle.
• If you do not intend to use the microphone for a long period of time,
please remove the USB cable.
• Do not touch the microphone while recording, as this will cause noise to
be recorded.
• Do not let the microphone close to high-voltage equipment or to devices
that emit strong electromagnetic fields, otherwise, it may cause the noise
to be recorded.
• Do not use or leave the microphone in hot, humid places.
1
1. Built-in camera
2. Camera status indicator
Light on: camera on
Light off: camera off
3. LED ring light
Product Structure
3
4
1
2
6910
5
7
8
11
12 13
2
Mode
Power on
Power off
Mute on
Indicator
Solid blue light
Light off
Solid red light
4. Power indicator
5. Gain control
Turn the knob to adjust gains for microphone input level.
6. Headphone volume/mute control
Turn the knob to adjust the headphone volume.
Short press the knob to mute/unmute the microphone.
7. 3.5mm headphone output
8. USB-C port
9. LED light on/off control
Touch to turn on/off the light or adjust the brightness.
10. Camera on/off control
Touch to turn on/off the camera.
11. Locking knob for angle adjustment
12. Desktop stand
13. Lens Cap with
3
Installation Guide
4
1. Loosen the locking knob, adjust the microphone to the desired angle,
then tighten the knob.
How to Use
5
2. Turn the gain control and the volume control knobs halfway to max
before recording.
Note:
50% levels are recommended. Please turn up/down according to your
needs.
3. Connect the microphone to a computer with the supplied cable.
4. Connect your headphones to the 3.5mm headphone jack for real-time
monitoring.
5. Record with camera.
- Open the video recording app on your computer.
- Touch the “ ” button to turn the camera on/off.
6. Use the LED ring light if necessary
Touch the “ ” button to turn the light on/off or adjust the brightness.
6
1. Connect the microphone to your
computer using the supplied cable.
2. Go to “Setting”, choose “Sound”.
3. Select “Speaker BY-CM6A” as the
output device.
4. Select “Microphone BY-CM6A” as
the input device.
Setup for Windows 10
Sound
Choose your output device
Choose your input device
Device properties
Device properties
93
Volume
Test your microphone
Input
Some apps are using custom output settings. You can personalize
these in app volume and device preferences below.
Some apps are using custom input settings. You can personalize
these in app volume and device preferences below.
Speaker (BY-CM6A)
Microphone (BY-CM6A)
Troubleshoot
Troubleshoot
7
1. Connect the microphone to your computer using the supplied cable.
2. Go to “Control Panel”-->“Hardware and Sound”--> “Sound”.
3. Select “Speaker BY-CM6A” as the default device in “Sound”, under the
“Playback” menu.
4. Select “Microphone BY-CM6A” as the default device in “Sound”,
under the “Recording” menu.
Setup for Windows 7
Sound
Playback
Speaker
BY-CM6A
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Configure Properties
OK Cancel Apply
Set Default
Sound
Playback
Microphone
BY-CM6A
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Configure Properties
OK Cancel Apply
Set Default
8
- All-in-one Cardioid microphone with USB-C connectivity
- Ideal for live streaming, video conferencing, vocal performance, etc
- Compatible with Windows and Mac computers
- Built-in camera with full HD 1080p resolution
- LED ring light with three levels of brightness
- Gain control, headphone volume control and mute function
- 3.5mm headphone jack for real-time monitoring
- Durable detachable microphone desktop stand
- Plug and play, easy to operate
Features
1. Connect the microphone to your computer using the supplied cable.
2. Go to Apple Icon-->System Preferences-->Sound Icon.
3. Select “BY-CM6A” under the “Input” tab.
4. Select “BY-CM6A” under the “Output” tab.
Setup for Mac
Sound
Name
External Microphone Microphone port
Type
BY-CM6A USB
Select a device for sound input:
Settings for the selected device:
Input volume:
Output volume: Mute
Input level:
Sound Effects Output Input
Shuw volume in menu bar
Sound
Name
Headphones Headphone port
Type
BY-CM6A USB
Select a device for sound output:
Settings for the selected device:
The selected device has no output controls
Output volume: Mute
Sound Effects Output Input
Shuw volume in menu bar
9
Table des matières
Autres manuels Boya Microphone
Boya
Boya BY-M3D Manuel utilisateur
Boya
Boya BY-XM6-S1 Manuel utilisateur
Boya
Boya BY-M1 Manuel utilisateur
Boya
Boya BY-PM700 Manuel utilisateur
Boya
Boya BY-M3-OP Manuel utilisateur
Boya
Boya BY-DM20 Manuel utilisateur
Boya
Boya BY-PM700SP Manuel utilisateur
Boya
Boya BY-BM2021 Manuel utilisateur
Boya
Boya BY-MM1+ Manuel utilisateur
Boya
Boya BY- WM4 PRO Manuel utilisateur
Boya
Boya BY-WM3D Manuel utilisateur
Boya
Boya BY-PM300 Manuel utilisateur
Boya
Boya BY-PM700 Manuel utilisateur
Boya
Boya BY-BM3031 Manuel utilisateur
Boya
Boya BY-CM6B Manuel utilisateur
Boya
Boya BY-M1 Pro Manuel utilisateur
Boya
Boya BY-VM01 Manuel utilisateur
Boya
Boya BY-BM58 Manuel utilisateur
Boya
Boya BY-PM700 Manuel utilisateur
Boya
Boya BY-WM3D Manuel utilisateur
