Boya BY-PM700 Manuel utilisateur
USB & XLR麦克风
使用说明
Instruction Manual
BY-PM700 Pro
USB & XLR
Microphone
Introduction
Package Contents
Thanks for choosing BOYA!
• BY-PM700 Pro Microphone
• USB-A to USB-C Cable (3m)
• USB-C to USB-C Cable (2m)
• 5-Pin XLR Female to Dual 3-Pin XLR Male Y-Cable (0.5m)
1
The BOYA BY-PM700 Pro is a desktop microphone with USB digital output and XLR analog
output, compatible with Android devices, Windows/Mac computers, and analog audio
devices. It provides a perfect audio solution for home studio recording, podcasting, voice
over, video conference, and more.
The microphone features pattern selection, allowing you to select Stereo, Omnidirectional,
Cardioid or Bidirectional pattern for dierent recording scenarios.
The 3.5mm headphone jack allows you to monitor and ensure the audio intelligibility during
recording. With built in controls for headphone volume, gain and muting, you are in total
control of your sound. An adjustable desktop stand allows you to place the microphone at
the angle that’s right for you.
1. Do not use the unit under water, don’t expose it to rain. Please store it in a cool, dry place.
2. Please use and store it in normal temperature. Do not move it from overheated to
super-cooled condition frequently as well as keep away from heat sources such as heater,
oven, or other devices that produce heat.
3. When using and storing, please pay attention to dust and moisture.
4. Be careful to violent collision.
Cautions
2
Product Structure
Front
1
6
Rear
7
8
Bottom
11
9
10
12
5
2
3
4
3
1. Tri-Capsule Array
2. Power Indicator
3. Mute Button
- Press to mute/unmute the microphone.
- When LED indicator is red, the microphone is muted.
4. Headphone Volume Control
5. Locking Knobs
6. Desk Stand
7. Gain Control
8. Pattern Selection
Stereo Pattern
Use the left and right channels to pick up sound, ideal for capturing
a realistic sound image.
Omnidirectional Pattern
Pick up sound equally from all directions, capturing a natural blend of voice
and ambiance with low sensitivity to wind and handling noise, as well as to
vocal plosives.
Cardioid Pattern
Maximizes the rejection of sound coming from the sides and rear of the
mic and can be used as a directional microphone to capture full, rich, and
natural-sounding audio for podcast, speech, dialog, instrument etc.
Bi-directional Pattern
Pick up sound at the front and rear of the microphone, while sides sounds
are not picked. It ts for capturing instruments, or recording an interview
between two people.
Functions
Angle Adjustment
Loosen the knobs of both sides anticlockwise.
Adjust the microphone at your desired angle, then tighten the knobs.
4
9. USB-C Port
10. 5-Pin XLR Connector
11. 5/8’’ Threaded Hole
12. 3.5mm Headphone Output
13. USB-C to USB-C Cable
14. USB-A to USB-C Cable
15. 5-Pin XLR Female to Dual
3-Pin XLR Male Y-Cable
13
14
15
5
Mounting the BY-PM700 Pro to a boom arm
1. Unscrew the locking knobs to remove the microphone from the desk stand.
2. Mount the microphone to the boom arm through its 5/8'' threaded hole.
Note:
the boom arm is not included.
How to Use
6
Using the USB digital output
1. Connect the microphone to your smartphone/computer
A
B
USB-C
devices
Mac/Windows
Computer
Using the supplied
USB-C to USB-C cable
Using the supplied
USB-A to USB-C cable
7
2. Connect headphones for audio monitoring.
3. Select the desired polar pattern and adjust the gain control and volume
control knobs according to your needs.
4. You are ready to record.
Setup for Windows 10
8
1. Connect the microphone to your
computer using the supplied cable.
2. Go to “Setting”, choose “Sound”.
3. Select “Speaker BY-PM700 Pro” as
the output device.
4. Select “Microphone BY-PM700 Pro”
as the input device.
Sound
Choose your output device
Choose your input device
Device properties
Device properties
93
Volume
Test your microphone
Input
Some apps are using custom output settings. You can personalize
these in app volume and device preferences below.
Some apps are using custom input settings. You can personalize
these in app volume and device preferences below.
Speaker (BY-PM700 Pro)
Microphone (BY-PM700 Pro)
Troubleshoot
Troubleshoot
Setup for Windows 7
9
1. Connect the microphone to your computer using the supplied cable.
2. Go to “Control Panel”-->“Hardware and Sound”--> “Sound”.
3. Select “Speaker BY-PM700 Pro” as the default device in “Sound”, under
the “Playback” menu.
4. Select “Microphone BY-PM700 Pro” as the default device in “Sound”, under
the “Recording” menu.
Sound
Playback
Speaker
BY-PM700 Pro
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Congure Properties
OK Cancel Apply
Set Default
Sound
Playback
Microphone
BY-PM700 Pro
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Congure Properties
OK Cancel Apply
Set Default
Autres manuels pour BY-PM700
3
Table des matières
Autres manuels Boya Microphone
Boya
Boya BY-VM600 Manuel utilisateur
Boya
Boya BY-CM1 Manuel utilisateur
Boya
Boya BY-M1 Pro Manuel utilisateur
Boya
Boya BY-M1 Manuel utilisateur
Boya
Boya BY-CM6 Manuel utilisateur
Boya
Boya BY-BMM400 Manuel utilisateur
Boya
Boya BY-WM4 PRO Manuel utilisateur
Boya
Boya BY-PM300 Manuel utilisateur
Boya
Boya BY-BM57 Manuel utilisateur
Boya
Boya BY-BM3030 Manuel utilisateur
Boya
Boya BY-M3-OP Manuel utilisateur
Boya
Boya BY-VM190 Manuel utilisateur
Boya
Boya BY-BM6060L Manuel utilisateur
Boya
Boya BY-DM20 Manuel utilisateur
Boya
Boya BY-WM3D Manuel utilisateur
Boya
Boya BY-PM700 Manuel utilisateur
Boya
Boya BY-PM700SP Manuel utilisateur
Boya
Boya BV-V01 Manuel utilisateur
Boya
Boya BY-WM5 Manuel utilisateur
Boya
Boya BY-BM2021 Manuel utilisateur
