Billion 810VGTX Manuel utilisateur

Telkom VPN-Lite router setup

User Manual

Billion 810VGTX

TELKOM VPN-Lite 2.2 ver.271010 Page 2

Contents

Introduction.........................................................................................................................................................3

Before you start..................................................................................................................................................4

VPN-Lite Setup Using Windows Utility ............................................................................................................5

VPN-Lite Setup using your web browser.........................................................................................................7

VPN-Lite Manual Setup Using Telnet .............................................................................................................10

Firmware Upgrade............................................................................................................................................14

TELKOM VPN-Lite 2.2 ver.271010 Page 3

Introduction

Welcome to the Telkom VPN Lite router setup user manual. This manual will provide information on

how to setup the Telkom VPN Lite service on your Billion 810VGTX using the setup utility, the router’s

graphical user interface (GUI) and CLI (Telnet or Console connection) commands (advanced user

only).

oTo ensure that the utility works correctly please temporarily

disabled all software firewall applications. These

applications may interfere with the processes needed to

successfully complete the router setup. Examples of these

applications/programs include: Norton Anti-virus, PC-Cillin,

Bit Defender and McAfee.

TELKOM VPN-Lite 2.2 ver.271010 Page 4

Before you start

To enable you to configure the Telkom VPN-Lite service on your Billion Router you first need to

On the VPN-Lite registration site you will be able to configure and manage your VPN-Lite sites as

shown in the image below.

Here you will retrieve vital information like site Usernames and LAN Subnets and Site Password to

configure the VPN-Lite sites. In the below setup sections you will be required to enter these values.

Please ensure that you have all the correct information for each site before you start any of the setup

sections mentioned in this document. Below is an image to show you what information on the VPN-

Lite setup site needs to be retrieved to enable you to setup you VPN-Lite. You can find this screen in

the Manage Sites section.

This manual assumes that the

Billion

810VGTX

is in its

factory default state. Thus:

LAN IP = 10.0.0.2

oIt is recommended to use the utility to setup VPN-Lite

on your Billion 810VGTX. The routers graphical user

interface or manual setup method is to be used by

experienced users only.

oPlease ensure that your PC is set to obtain an IP

address automatically from the router’s DHCP server.

TELKOM VPN-Lite 2.2 ver.271010 Page 5

VPN-Lite Setup Using Windows Utility

You can download the VPN-Lite utility program form the VPN-Lite website by selecting the Download

section. After you successfully downloaded the utility just run the file to start the setup process.

On start up you will be requested to provide login information to connect to the router. By default the

router login name will be admin and the login password will be admin. The default IP address for the

router is 10.0.0.2 but if this has changed unselect the Use default IP check box and enter the current

IP address of your router.

After a successful login the following screen will appear. Here you can setup your Internet Account

information, VPN Lite and with the advance settings you can change your DHCP settings.

TELKOM VPN-Lite 2.2 ver.271010 Page 6

Internet Service Provider Account Setup

Select “Activate Internet Account configuration” tick box to set your Internet username and password.

You can now enter your ISP username and password to connect to the internet. Your service provider

will provide you with this information.

VPN Lite – Local Site Configuration

Before you start with this section, please make sure you have registered on the VPN-Lite service

website and that you have received your VPN-Lite account and IP information for the local site (this

will be one of your branches or offices where you will install the VPN-Lite service). Please refer to the

Before you start section in this document on page 4 for additional information.

To change these settings select “Activate VPN Lite configuration”.

By using the information retrieved from the Telkom VPN-Lite setup website (see page 4) enter your

site username, site password and site LAN IP range using the IP slash notation as it appears on the

Telkom VPN-Lite website.

Advance Settings

In the advance settings you can enable or disable the router’s DHCP settings. Please remember that

if you disable the DHCP settings you will loose connection to your router after the settings have been

updated, as the static IP address would have been changed to another IP range. You can also set

your DHCP start and end range.

To save the settings press Save Settings and wait for the application to complete the setup process.

TELKOM VPN-Lite 2.2 ver.271010 Page 7

VPN-Lite Setup using your web browser

This section will guide you through the relative steps to setup you VPN-Lite service using the routers

graphical user interface browser.

Connection to the router using your web browser

Open a web browser like Internet Explorer or Mozilla Firefox. In the internet address bar type in

http://10.0.0.2 and press enter. You will be prompted to supply a username and password. The user

name is admin and the password is admin.

Setup your VPN-Lite

After the router’s graphical user interface was successfully loaded in your web browser, firstly click on

Advanced and then select Configuration – WAN – WAN Profile, in the menu on the left of the screen.

The following screen will appear on the right.

Ensure that the router’s Protocol is set to Multiple Session. Click on Multiple Session-Second Session,

the following screen will appear.

TELKOM VPN-Lite 2.2 ver.271010 Page 8

You will require you VPN-Lite site username and password that you retrieved from the Telkom VPN-

Lite setup site. You can change the Service Name field to VPNLite, Disable the Nat setting and enter

your VPN-Lite site Username and Password. Ensure that the Enable tick-box is ticked and press

Apply to save the settings.

You will now see your new WAN Connection on the default landing page.

In the menu in the left first click Advances and then select Configuration – Advanced – Static Route

the following screen will appear in the right.

Select the Delete radio button next to the 0.0.0.0 default router automatically created by the router and

click on Edit/Delete. This will remove the default route.

You need to setup 3 Static Routes for your VPN-Lite service. You should supply the Destination,

Netmask and Interface. The first Destination is 10.0.0.0: the Netmask should be 255.0.0.0 and for

interface select MPPP-0. Select apply to save the first Static Route.

Press create to add the following 2 Static Route’s.

Destination Netmask Interface

172.16.0.0 255.240.0.0 ppp-0

192.168.0.0 255.255.0.0 ppp-0

Configure your router IP address

In the menu on the left firstly click on Advance then select Configuration – LAN – Ethernet. The

following screen will appear on the right.

TELKOM VPN-Lite 2.2 ver.271010 Page 9

On the Telkom VPN-Lite setup site you would have received a LAN Subnet address that could look

like this 10.0.2.0/24. Your router’s LAN IP would then be 10.0.2.2 and your Subnet Mask will be

255.255.255.0. Change the IP Address and the Subnet Mask on the screen and press the Apply

button.

Your routers IP address is now changed to the new IP entered in the previous step. To ensure that

your PC can still communicate with your Billion router on its new LAN IP address, you should release

and renew your PC’s IP address. In XP, Vista or Windows 7 press the Start button. Select All

Programs\Accessories\Command Prompt. A Command prompt screen will appear

Type the following and press enter: ipconfig /release

You should now wait for your IP to be released.

Then type: ipconfig /renew.

Your PC’s IP will now be renewed and within the new range to enable you to connect to your Billion

router’s new LAN IP address. You can now close the Command Prompt screen.

To reconnect to your router select the link with the new IP address displayed in your Internet Browser.

Your Internet Browser will now reconnect to your Billion router.

Now in the bottom right corner press the SAVE CONFIG button. The following screen will appear.

Press the Apply button. Your settings will now be saved and you can start to use your VPN-Lite

service.

TELKOM VPN-Lite 2.2 ver.271010 Page 10

VPN-Lite Manual Setup Using Telnet

The following section will guide you to setup you VPN-Lite servise using the Telnet command line interface.

Before you start please refer to the Before you start section in this document see page 4.

1. IP Management:

a. Telnet to the Billion 810VGTX using the router’s LAN IP address (default = 10.0.0.2) using this

command: “telnet 10.0.0.2”.

This will access the Billion 810VGTX’s CLI interface allowing you to send setup commands. On

successful connection, you will be prompted for a login and password (defaults: admin &

admin). See screenshot below.

Enter your administration login & password. On successful authentication you will arrive at

the admin prompt. (See screenshot below.)

b. Setting the DHCP Server: This task is optional. If you want your Billion 810VGTX to act as a

DHCP server – distributing IPs to your LAN PCs – please perform this step.

Set the router’s DHCP range to the correct target range using this command:

Syntax: dhcpserver subnet 1 add iprange <Target range network address> <Target

range subnet>

Example: dhcpserver subnet 1 add iprange 1 10.0.17.0 255.255.255.0

This router will now distribute IPs to connected PCs from the range 10.0.17.1 -> 10.0.17.254

Note: Alternatively, if you prefer to use static IPs on your network and you wish to disable the

router’s DHCP server feature, please run this command: dhcpserver disable

Autres manuels pour 810VGTX

Table des matières

Autres manuels Billion Routeur réseau

Billion

Billion BIPAC-741 GE V2.0 Manuel utilisateur

Billion

Billion BiPAC 7402NX Manuel utilisateur

Billion

Billion BiPAC 7800GZ(L) Manuel utilisateur

Billion

Billion BiPAC 5200S Series Manuel utilisateur

Billion

Billion BiPAC 6200NXL Manuel du propriétaire

Billion

Billion BiPAC 7404V series Manuel utilisateur

Billion

Billion BIPAC 5102G Manuel utilisateur

Billion

Billion BiPAC 7100SG Manuel utilisateur

Billion

Billion BiPAC 7404V series Manuel utilisateur

Billion

Billion BIPAC 7500 Manuel utilisateur

Billion

Billion BiPAC 7300N Manuel utilisateur

Billion

Billion BiPAC 5200N Manuel utilisateur

Billion

Billion BIPAC 7402W Manuel utilisateur

Billion

Billion BiPAC 5210G RC Manuel utilisateur

Billion

Billion BiPAC 5100S Manuel utilisateur

Billion

Billion BiPAC 7820NZ Manuel utilisateur

Billion

Billion BiPAC 7404VGOX Manuel utilisateur

Billion

Billion BiPAC 7402(G)(L) R3 Series Manuel utilisateur

Billion

Billion BiPAC 7402G R3 Manuel utilisateur

Billion

Billion BiPAC 5200 Manuel utilisateur

Billion

Billion BiPAC 7404VNOX Manuel utilisateur

Billion

Billion BiPAC 7300M Manuel utilisateur

Billion

Billion BiPAC 8501 Manuel utilisateur

Billion

Billion BiPAC 7800NEXL Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur