Billion BiPAC 7300N Manuel utilisateur
BiPAC 7300N
ADSL2/2+ Broadband Modem/Router
QoS Firewall Wireless N Draft 2
Multi-Port Switching Hub
Quick Install Guide
LThis guide covers only the initial
Internet set-up. Please refer to
the full User Manual on the CD-
ROM for more advanced
settings. This guide is based on
the Billion BiPAC 7300N Draft 2
ADSL2+ Wireless
Modem/Router. Screen shots in
this guide may vary slightly from
the actual router.
www.billion.uk.com
2
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
3
QUICK INSTALL GUIDE
Billion 7300N Draft 2 ADSL2+ Wireless Modem/Router Installation
1.1 Starting out:
Before you can establish an Internet connection through your Billion 7300N Modem/Router
make sure you have the following:
1. A Computer or Notebook with an installed Network Adaptor (sometimes called an
Ethernet Adaptor, Network Card or NIC)
2. An ADSL or DSL service account and configuration information provided by your
Internet Service Provider (ISP), or an existing cable modem. You should need only a
User Name and Password, but you can check with your ISP to see if you require any
of the other following configuration parameters to connect your Billion 7300N
Modem/Router to the Internet :
a. ISP User Name and Password
b. VPI/VCI parameters
c. Multiplexing Method
d. Host and Domain Names
e. ISP Domain Name Server ( DNS ) Address
f. Fixed or Static IPAddress.
1.2 Steps for Connection:
The following are the steps to properly connect your Billion 7300N Modem/Router. N.B. For
configuration as a broadband router go to steps 4 and 5 and then jump to section 2.1.
1. Turn off your computer.
2. If you do not have an ADSL faceplate installed by your service provider, you must ensure
ADSL splitters (also called microfilters or filters) are fitted to all telephone sockets in use.
3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen telephone
socket (or ADSL faceplate if you have one) to the DSL Port of your Billion 7300N
Modem/Router.
4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your Billion
7300N Modem/Router to the Network Adaptor in your computer.
5. Connect the Power adaptor to the Billion 7300N Modem/Router and plug the other end
into a Power outlet. Power up the unit.
6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor to locate
the Router. Please wait for the DSL light on the front of the router to turn to solid – this
may take up to 1-2 mins (see 3.1 Troubleshooting the connection).
4
7. You are now ready to configure your ADSL/Broadband and Wireless connection for the
Billion 7300N Modem/Router. All you need to do is to follow the instructions that follow
and enter your User Name and Password as supplied by your Service Provider. No other
changes should be necessary.
2.1 ADSL/Broadband and Wireless Configuration:
1. Open Internet Explorer or your default web browser and type in http://192.168.1.254
in the address bar (where you would normally enter the web site address) as per the
illustration below.
2. You will be presented with a user name and password prompt.* Simply enter user
name as admin, password as admin and click OK. This will take you to the modem’s
Status page. N.B. For configuration as a broadband router go to section 2.2 now.
* If the user name and password prompt box does not appear make sure
that any firewall or anti-virus such as Trend Micro or Norton is disabled.
Also ensure that your Internet settings are correct. (In Internet Explorer go
to Tools/Internet Options/Connections and make sure “Never dial a
Connection” is checked. Then Click on the LAN settings and ensure
“Automatically detect settings” is checked and all other fields are blank.
Then go to Tools/Internet Options/Security and return your Security
settings to “default”. )
5
3. From the Menu on the left select Quick Start.
4. Ensure the Connect Mode is ADSL (Recommended) and click on Continue.
6
5. Enter your Username and Password as supplied by your Internet Service Provider in
the relevant fields, and click on Continue.
6. Please wait while the router applies the new settings.
7
7. Now click on Next to Wireless. N.B. If you do not go through the wireless setup on
the Wizard, then you must click Save Config at the bottom of the page and then click
Apply settings to save your username and password to Flash.
8. From the drop down menu in the Security Mode field you can choose your preferred
wireless security (or keep the wireless security disabled.) Please ensure your wireless
adaptor or laptop is compatible with your chosen security mode.
8
9. For WPA you should enter an alphanumeric password (numbers and letters) of between
8 and 64 characters in the WPA Shared Key field and click Continue.
10. Please wait while the router applies the new settings.
9
11. This completes the wireless security configuration.
12. You should now be connected to the Internet. You can check your connection on the
Status page by selecting Status from the menu on the left-hand side.
13. For advance configuration please access the manual on the CD provided.
10
2.2 Broadband Router configuration (optional):
The Ethernet Port 1 of the BiPAC 7300N at the back of the router can be configured as a
WAN interface for connecting to an external broadband modem.
N.B. Please note only Port 1 can be configured as a WAN interface.
1. From the main screen, click on the Advanced tab on the left hand side.
2. Click the Configuration tab on the left hand side and then the WAN Profile tab.
The page should look like this:
Autres manuels pour BiPAC 7300N
3
Table des matières
Autres manuels Billion Routeur réseau
Billion
Billion BiPAC 7800(N) Manuel utilisateur
Billion
Billion BiPAC 5200G Series Manuel utilisateur
Billion
Billion BiPAC 7402NX Manuel utilisateur
Billion
Billion BiPAC 7300VGP Manuel utilisateur
Billion
Billion BIPAC-74x GE Series Manuel utilisateur
Billion
Billion BiPAC 8501 R3 Manuel utilisateur
Billion
Billion BiPAC 5100S Manuel utilisateur
Billion
Billion BiPAC 7404VNOX Manuel utilisateur
Billion
Billion 810VGTX Manuel utilisateur
Billion
Billion BiPAC 7402G Manuel utilisateur
Billion
Billion BiPAC 9800 Manuel utilisateur
Billion
Billion BiPAC 7300 RA Manuel utilisateur
Billion
Billion BiPAC 7100SG Manuel utilisateur
Billion
Billion BiPAC 7300G RA Manuel utilisateur
Billion
Billion BiPAC 7401VP Manuel utilisateur
Billion
Billion BiPAC 8800NL Manuel utilisateur
Billion
Billion BiPAC 7401VGP R3 Manuel utilisateur
Billion
Billion BiPAC 5200S Series Manuel utilisateur
Billion
Billion Bipac 74 Series Manuel utilisateur
Billion
Billion BIPAC 7500 Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité
LevelOne
LevelOne FBR-1416 Manuel utilisateur