Billion BIPAC 7500 Manuel utilisateur

BIPAC-7500G

802.11g ADSL VPN Firewall Router with

3DES Accelerator

Quick Start Guide

Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator

Package Contents

BIPAC-7500GADSL VPN Firewall Router

CD-ROM containing the online manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12V DC, 1A)

ADSL Line Filter (Optional)

(Note: Included for Australia)

Two 5dbi Antennae

This Quick Start Guide

For more detailed instructions on configuring and using

the 802.11g ADSL VPN Firewall Router, please refer to

the on-line manual.

 Do not use the BIPAC-7500G ADSL VPN Firewall Router in high

humidity or high temperatures.

 Do not use the same power source for the BIPAC-7500G ADS

VPN Firewall Router as other equipment.

 Do not open or repair the case yourself. If the BIPAC-7500G ADSL

VPN Firewall Router is too hot, turn off the power immediately and

have it repaired at a qualified service center.

Warning

 Place the BIPAC-7500G ADSL VPN Firewall Router on a stable

surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

ttention

Quick Start Guide

The Front LEDs

LED Meaning

1 PWR Lit when power is ON.

2 SYS Lit when the system is ready.

3 LAN port 1 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps

Blinking when data is transmitted/received.

4 LAN port 2 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps

Blinking when data is transmitted/received.

5 LAN port 3 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps

Blinking when data is transmitted/received.

6 LAN port 4 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps

Blinking when data is transmitted/received.

7 WLAN Lit green when the wireless connection is established. Flashes

when sending/receiving data.

10 MAIL Flash when there is Email in your configured Email account.

11 PPP Lit when there is a PPPoA / PPPoE connection.

13 ADSL Lit when successfully connected to an ADSL DSLAM (“linesync”).

Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator

The Rear Ports

Port Meaning

1 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

2 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

3 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you cannot login to the router. E.g. forgot the password)

5 PWR Connect the supplied power adapter to this jack.

6 Power Switch Power ON/OFF switch

Quick Start Guide

Connecting Your ADSL Router

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS and WLAN LEDs are lit steadily and that the relevant LAN LED

is lit.

Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click

Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Billion Routeur réseau

Billion

Billion BiPAC 8500/8520 Manuel utilisateur

Billion

Billion BiPAC 7800NEXL Manuel utilisateur

Billion

Billion BiPAC 7402NX Manuel utilisateur

Billion

Billion BiPAC 2070 Manuel utilisateur

Billion

Billion BiPAC 7100SG Manuel utilisateur

Billion

Billion BiPAC 7404VNOX Manuel utilisateur

Billion

Billion BiPAC 7800NL Manuel utilisateur

Billion

Billion BiPAC 5100 Manuel utilisateur

Billion

Billion BIPAC- 8500 Manuel utilisateur

Billion

Billion BiPAC 8501 Manuel utilisateur

Billion

Billion BiPAC 8501 Manuel utilisateur

Billion

Billion BiPAC 7800(N) Manuel utilisateur

Billion

Billion BiPAC 8800NL R2 Guide de configuration

Billion

Billion BIPAC-74x GE Series Manuel utilisateur

Billion

Billion BIPAC 5102G Manuel utilisateur

Billion

Billion BiPAC 5210G RC Manuel utilisateur

Billion

Billion VoIP/(802.11g) ADSL2+ Router BiPAC 7300VGP Manuel utilisateur

Billion

Billion BiPAC 7300G Manuel utilisateur

Billion

Billion BiPAC 7401VGP R3 Manuel utilisateur

Billion

Billion BiPAC 7404V series Manuel utilisateur

Billion

Billion BIPAC-7402 Manuel utilisateur

Billion

Billion BiPAC 9800 Manuel utilisateur

Billion

Billion BiPAC 7402VGO Manuel utilisateur

Billion

Billion BiPAC 7800(N) Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur