Advantech EKI-6538 Manuel utilisateur

EKI-6538

8-port 10/100 Mbps

Industrial Smart Ethernet Switch

User Manual

EKI-6538 User Manual ii

The documentation and the software included with this product are copy-

righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003653800 1st Edition

Printed in Taiwan June 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

EKI-6538 User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test

conditions for passing included the equipment being operated within an

industrial enclosure. In order to protect the product from being damaged

by ESD (Electrostatic Discharge) and EMI leakage, we strongly recom-

mend the use of CE-compliant industrial enclosure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (OS, version, software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid or spray detergents for clean-

ing.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

EKI-6538 User Manual vi

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE MAY GO BELOW

-10° C (14° F) OR ABOVE 70° C (158° F). THIS COULD DAM-

AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A

CONTROLLED ENVIRONMENT.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

vii Table of Contents

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................ 2

1.2 Feature Summary .............................................................. 4

1.3 Specifications .................................................................... 5

1.4 Packing List....................................................................... 7

1.5 Ordering Information ........................................................ 7

1.6 Safety Precaution............................................................... 7

Chapter 2 Installation ..................................................... 10

2.1 Overview ........................................................................ 10

Figure 2.1:Overview of EKI-6538 ............................... 10

2.2 LED Indicators ................................................................ 11

Table 2.1:EKI-6538 LED Definition ........................... 11

2.3 Dimensions...................................................................... 12

Figure 2.2:Front View of EKI-6538 ........................... 12

Figure 2.3:Side View of EKI-6538 .............................. 13

Figure 2.4:Bottom View of EKI-6538 ......................... 13

2.4 Mounting ......................................................................... 14

2.4.1 Panel Mounting ............................................................ 14

Figure 2.5:Combine the Metal Mounting Kit .............. 14

Figure 2.6:Attach EKI-6538 to the Wall ..................... 15

2.4.2 DIN Rail Mounting ...................................................... 16

Figure 2.7:Installation to DIN Rail Step 1 ................... 16

Figure 2.8:Installation to DIN Rail Step 2 ................... 17

Figure 2.9:Installation to DIN Rail Step 3 ................... 18

2.5 Network Connection ....................................................... 18

2.6 Power Connection ........................................................... 19

Figure 2.10:Pin Assignment of the Power Connector . 19

2.7 Digital Inputs & Outputs................................................. 20

Figure 2.11:Digital I/O Pin Assignment ...................... 20

Figure 2.12:Digital Output Connection ....................... 20

2.8 RS-232 Connection ......................................................... 21

Figure 2.13:RJ-48 (10-pin) to DB9 (F) Cable ............. 21

Chapter 3 Configuration................................................. 24

3.1 RS-232 Console .............................................................. 24

Figure 3.1:Open Hyper Terminal ................................ 24

Figure 3.2:COM Port Properties Setting ...................... 25

Figure 3.3:Login Screen: RS-232 Configuration ......... 25

Figure 3.4:RS-232 Console Configuration .................. 26

3.1.1 Networking Configuration .......................................... 26

Figure 3.5:Network Configuration of RS-232 ............. 26

3.1.2 Password Configuration ............................................... 27

Figure 3.6:Error Message in Password Configuration . 27

EKI-6538 User Manual viii

3.1.3 System Restart ............................................................. 28

Figure 3.7:Restart EKI-6538 ........................................ 28

3.1.4 Factory Reset ............................................................... 28

Figure 3.8:Default Setting via 232 Configuration ....... 28

3.2 Web Browser................................................................... 29

Figure 3.9:EKI-6538 Web Login Page ........................ 29

Figure 3.10:Function Overview Page .......................... 30

3.2.1 Basic Configuration ..................................................... 30

Figure 3.11:System Setting .......................................... 31

Figure 3.12:ARL Aging Time Setting ......................... 32

Figure 3.13:DI/DO Setting .......................................... 33

Figure 3.14:Port Status ................................................ 33

Figure 3.15:Port Configuration .................................... 35

Figure 3.16:Port Statistics Overview ........................... 35

Figure 3.17:Detail Statistics of Specific Port ............... 36

3.2.2 VLAN Configuration ................................................... 36

Figure 3.18:VLAN Mode Setting ................................ 36

Figure 3.19:Default Port-based VLAN Setting Screen 37

Figure 3.20:Port-based VLAN Setting ........................ 38

Figure 3.21:IEEE 802.1Q VLAN Setting .................... 39

3.2.3 Address Configuration ................................................. 39

Figure 3.22:Port Security Configure ............................ 39

Figure 3.23:Setup the MAC Security Address Table .. 40

3.2.4 Port Trunk .................................................................... 40

Figure 3.24:Port Trunk Setting .................................... 41

3.2.5 Port Mirroring .............................................................. 41

Figure 3.25:Port Mirror Setting ................................... 41

3.2.6 QoS (Quality of Service) ............................................. 42

Figure 3.26:QoS Setting ............................................. 42

3.2.7 Bandwidth Administration ........................................... 43

Figure 3.27:Rate Limitation Setting ........................... 43

Figure 3.28:Storm Control Setting Page ...................... 44

3.2.8 Firmware Upgrade ....................................................... 44

Figure 3.29:Firmware Upgrade .................................... 44

3.3 Self Diagnosis ................................................................. 45

Figure 3.30:Self-Diagnosis .......................................... 45

CHAPTER

Introduction

Sections include:

• Features

• Feature Summary

• Specifications

• Packing List

• Ordering Information

• Safety Precaution

EKI-6538 User Manual 2

Chapter 1 Introduction

1.1 Features

Equipped with 8 x 10/100Base-TX Fast Ethernet ports with RJ-45 con-

nectors, Advantech’s EKI-6538 Industrial Smart Ethernet Switch repre-

sents a cost-effective solution for customers to implement Ethernet

packet switching with easy fine-tuning of network performance and secu-

rity. Able to operate in the harshest of environments, EKI-6538 offers

wide dual power input (10~48 VDC), wide operating temperatures

(0 ~ 60° C), a rugged mechanical design, and multiple mounting methods.

EKI-6538 runs smarter than other unmanaged switches in network man-

agement: VLAN, QoS, Port Mirroring, and Port Trunk.

VLANs for Enhanced Security & Performance

EKI-6538 supports IEEE 802.1Q tagged VLAN standard to improve

security and bandwidth utilization by limiting the broadcast domains and

confining intra-group traffic within their segments. It also helps you to

break up the limitation of physical connections.

Quality of Service Support

The QoS function support ensures your important data is delivered con-

sistently and predictably. EKI-6538 supports Layer 2 - 802.1p Priority

Queue control to prioritize network packets. Classification of user data

priorities can be based on a Priority Queue data packets.

Port Mirroring

The network administrator can use this function as a diagnostic tool or

debugging feature, especially when fending off an attack. EKI-6538

assists you to keep close track of switch performance and alter it if neces-

sary. Port mirroring can be managed locally or remotely. The administra-

tor places a protocol analyzer on the port receiving the mirrored data to

monitor each segment separately. The analyzer captures and evaluates the

data without affecting the client on the original port.

Table des matières

Autres manuels Advantech Routeur réseau

Advantech

Advantech SmartFlex SR304 Manuel utilisateur

Advantech

Advantech ICR-3241 Manuel utilisateur

Advantech

Advantech B&B SmartWorx ESWGP506-2SFP-T Manuel utilisateur

Advantech

Advantech SmartFlex SR310 Manuel utilisateur

Advantech

Advantech LR77 v2 Libratum Manuel utilisateur

Advantech

Advantech RR75i v2 Manuel utilisateur

Advantech

Advantech EKI-1334 Manuel utilisateur

Advantech

Advantech ICR-2701 Manuel utilisateur

Advantech

Advantech AirborneM2M BB-ABDN-ER-DP553 Manuel utilisateur

Advantech

Advantech UR5i v2 Libratum Manuel utilisateur

Advantech

Advantech ADAM-6520 Series Manuel utilisateur

Advantech

Advantech ICR-4453 Manuel utilisateur

Advantech

Advantech SmartMotion ST352 Manuel utilisateur

Advantech

Advantech ICR-3232 Manuel utilisateur

Advantech

Advantech UR5i v2 Libratum Instructions d'installation et d'utilisation

Advantech

Advantech ICR-1601 Manuel utilisateur

Advantech

Advantech EKI-2528PAI Manuel utilisateur

Advantech

Advantech SmartFlex SR307 Manuel utilisateur

Advantech

Advantech EKI-7659C Manuel utilisateur

Advantech

Advantech B+B SmartWorx SE416 Manuel utilisateur

Advantech

Advantech SmartFlex SR307 Manuel utilisateur

Advantech

Advantech SmartMotion ST352 Manuel utilisateur

Advantech

Advantech ICR-4434 Manuel utilisateur

Advantech

Advantech EKI-2525 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité