Advantech MIC-3666 Manuel utilisateur

User Manual

MIC-3666

Dual 10 Gigabit Ethernet XMC

MIC-3666 User Manual ii

The documentation and the software included with this product are copyrighted 2010

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel®and Pentium®are trademarks of Intel®Corporation.

Microsoft®Windows®and MS-DOS are registered trademarks of Microsoft®Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandise

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 20023666001 Edition 2

Printed in Taiwan October 2017

iii MIC-3666 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

This equipment has passed the FM certification. According to the National Fire Pro-

tection Association, work sites are classified into different classes, divisions and

groups, based on hazard considerations. This equipment is compliant with the speci-

fications of Class I, Division 2, Groups A, B, C and D indoor hazards.

Technical Support and Assistance

1. Visit the Advantech web site at http://support.advantech.com where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

MIC-3666 User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com.

Warning! Warnings indicate conditions, which if disregarded, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.:

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

Note! Notes provide optional additional information.

v MIC-3666 User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

MIC-3666 User Manual vi

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power (electrostatic discharge) as you connect a jumper or install a card may

damage sensitive electronic components.

We Appreciate Your Input

Please let us know of any aspect of this product, including the manual, which could

use improvement or correction. We appreciate your valuable input in helping make

our products better.

vii MIC-3666 User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ............................................................................................... 2

1.2 Specifications ............................................................................................ 3

1.2.1 Ethernet ........................................................................................ 3

1.2.2 PCI Express .................................................................................. 3

1.2.3 Power Consumption...................................................................... 3

1.2.4 Mechanical and Environmental Specifications.............................. 3

1.2.5 Software Support .......................................................................... 3

1.2.6 Compliance ................................................................................... 3

1.3 Safety Precautions .................................................................................... 4

Chapter 2 Hardware and Driver Installation .......5

2.1 Initial Inspection ........................................................................................ 6

2.2 Connector Locations ................................................................................. 6

2.3 Card Installation ........................................................................................ 7

2.4 Front Panel LED Indicators ....................................................................... 7

Figure 2.1 MIC-3666 front panel LEDs ........................................ 7

2.5 Driver/Utility Installation............................................................................. 7

Appendix A Pin Assignments .................................9

A.1 P15 Connector ........................................................................................ 10

Table A.1: MIC-3666 XMC Connector P15 Pin Assignments .... 10

MIC-3666 User Manual viii

Chapter 1

1General Information

MIC-3666 User Manual 2

1.1 Introduction

The MIC-3666 is a low power, dual-port 10 GbE XMC, with SFP+ pluggable modules

for multi-mode and single-mode fiber media and is based on the Intel® 82599ES 10

Gigabit Ethernet controller. The XMC provides a high performance PCIe x8 interface

at 5 Gb/s per lane at an outstanding low power dissipation of less than 10 W. Support

for Intel’s offloading and platform enhancement features yields maximum network

throughput while preserving valuable CPU cycles for application processing.

The MIC-3666 features an Intel® 82599 which provides Intel® Virtualization Technol-

ogy for Connectivity (VT-c) including Virtual Machine Device Queues (VMDq) and

PCI SIG compliant Single Root I/O Virtualization (SR-IOV), helping to reduce I/O bot-

tlenecks, boost throughput, and reduce latency. Where virtualization is required,

VMDqs improve performance by offloading the data-sorting burden from the virtual

machine manager (VMM) to the network controller. The MIC-3666’s specialized fea-

tures include Layer 2 & 3 security with IPSec & LinkSec; Intel® I/OAT Acceleration

Technology v3.0; VLAN tagging, stripping and packet filtering; and TCP, iSCSI, and

Fiber Channel over Ethernet (FCoE) offload.

Table des matières

Autres manuels Advantech Routeur réseau

Advantech

Advantech ICR-3201 Series Manuel utilisateur

Advantech

Advantech Bivias v2 Manuel utilisateur

Advantech

Advantech B+B SmartWorx SE416 Manuel utilisateur

Advantech

Advantech SmartFlex SR300 Manuel utilisateur

Advantech

Advantech ICR-3831 Mode d’emploi

Advantech

Advantech ICR-4401 Manuel utilisateur

Advantech

Advantech ICR-4453 Manuel utilisateur

Advantech

Advantech SmartMotion ST352 Manuel utilisateur

Advantech

Advantech ICR-3831 Mode d’emploi

Advantech

Advantech SmartFlex SR304 Manuel utilisateur

Advantech

Advantech LR77 v2 Libratum Manuel utilisateur

Advantech

Advantech ICR-2041 Manuel utilisateur

Advantech

Advantech ICR-3201 Series Mode d’emploi

Advantech

Advantech XR5i v2 Mode d’emploi

Advantech

Advantech EKI2726FHPI Series Manuel d'installation et d'exploitation

Advantech

Advantech ICR-3241 Manuel utilisateur

Advantech

Advantech ICR-2431 Manuel utilisateur

Advantech

Advantech EKI-7556MI Manuel utilisateur

Advantech

Advantech SmartFlex SR305 Manuel utilisateur

Advantech

Advantech ICR-2441 Manuel utilisateur

Advantech

Advantech ICR-2441 Manuel utilisateur

Advantech

Advantech ICR-3241 Manuel utilisateur

Advantech

Advantech EKI-2526M/S Manuel utilisateur

Advantech

Advantech SmartFlex SR304 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité