Advantech UR5i v2 Libratum Instructions d'installation et d'utilisation

Expansion Port

Mounting for v2 Routers

APPLICATION NOTE

Expansion Port Mounting

Used Symbols

Danger – Information regarding user safety or potential damage to the router.

Attention – Problems that can arise in speciﬁc situations.

Information, notice – Useful tips or information of special interest.

GPL Licence

Source codes under GPL licence are available free of charge by sending an email to:

[email protected]

Advantech B+B SmartWorx s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic.

Document No. APP-0001-EN, revision from November 21, 2018. Released in the Czech Republic.

Expansion Port Mounting

Contents

1 Safety Instruction 1

2 Product Disposal Instructions 1

3 Expansion Port Mounting 1

3.1 Plastic Enclosure ................................... 1

3.2 Metal Enclosure ................................... 3

4 Recommended Literature 5

Expansion Port Mounting

List of Figures

1 Router in plastic enclosure .............................. 1

2 Router in metal enclosure .............................. 3

List of Tables

1 Part list for routers in plastic enclosure ....................... 2

2 Part list for routers in metal enclosure ....................... 4

iii

Expansion Port Mounting

1. Safety Instruction

Please, observe the following instructions:

•The expansion port must be used in compliance with all applicable international and

national laws and in compliance with any special restrictions regulating the utilization of

the communication module in prescribed applications and environments.

•Use only the original Advantech B+B SmartWorx company accessories. Thus you will

prevent possible health risks and damage to the devices and ensure compliance with all

relevant provisions. Unauthorised adjustments or use of unapproved accessories may

result in damage to the expansion port and breach of applicable laws. Use of unapproved

adjustments or accessories may lead to cancellation of guarantee, which has no effects

on your legal rights.

•Do not expose the expansion port to extreme conditions. Protect it from dust, moisture

and heat.

2. Product Disposal Instructions

The WEEE (Waste Electrical and Electronic Equipment: 2012/19/EU) directive has been

introduced to ensure that electrical/electronic products are recycled using the best available

recovery techniques to minimize the impact on the environment. This product contains high

quality materials and components which can be recycled. At the end of it’s life this product

MUST NOT be mixed with other commercial waste for disposal. Check the terms and condi-

tions of your supplier for disposal information.

Expansion Port Mounting

3. Expansion Port Mounting

3.1 Plastic Enclosure

Attention! Expansion port PORT1 and PORT2 can be connected only when the router

is switched off.

At ﬁrst, it is necessary to remove (snap out) front panel (position 5) and then take out

the B-RB-v2 motherboard (position 1). The expansion port PORT1 (position 2) has to be

connected to connector J8 (see ﬁgure below) of the router motherboard (B-RB-v2, position

1) from TOP side. The expansion port PORT2 (position 3) has to be connected to connector

J3 (see ﬁgure below) of the router motherboard (B-RB-v2, position 1) from TOP side. Attach

each expansion port to the B-RB-v2 board using three pieces of spacers (position 10). After

mounting the expansion port, slide the router (motherboard with expansion ports) to the box

and snap the front panel in.

Figure 1: Router in plastic enclosure

Expansion Port Mounting

Part Description Count

1 Router motherboard 1

2 Expansion port PORT 1 1

3 Expansion port PORT 2 1

4 Router box 1

5 Front panel of the router 1

6 Spacers for attaching the expansion port to the motherboard 6

Table 1: Part list for routers in plastic enclosure

Expansion Port Mounting

3.2 Metal Enclosure

Attention! Expansion port PORT1 and PORT2 can be connected only when the router

is switched off.

Unscrew four screws (position 11) on the rear panel (position 6) and remove it. Then take

out the B-RB-v2 motherboard (position 1). The expansion port PORT1 (position 2) has to be

connected to connector J8 (see ﬁgure below) of the router motherboard (B-RB-v2, position 1)

from TOP side. The expansion port PORT2 (position 3) has to be connected to connector J3

(see ﬁgure below) of the router motherboard (B-RB-v2, position 1) from TOP side. Attach each

expansion port to the B-RB-v2 board using three pieces of spacers (position 10). After mount-

ing the expansion port, slide the router (motherboard with expansion ports) to the enclosure,

put the rear panel on the enclosure and screw it using four screws (position 11).

Figure 2: Router in metal enclosure

Expansion Port Mounting

Part Description Count

1 Router motherboard 1

2 Expansion port PORT 1 1

3 Expansion port PORT 2 1

4 Left sidewall 1

5 Right sidewall 1

6 Rear panel of the router 1

7 Front panel of the router 1

8 Bottom cover 1

9 Top cover 1

10 Spacers for attaching the expansion port to the motherboard 6

11 Screw for assembling the router enclosure 8

Table 2: Part list for routers in metal enclosure

Expansion Port Mounting

4. Recommended Literature

[1] Advantech B+B SmartWorx: Conﬁguration Manual – Cellular Industrial

v2 Routers (MAN-0021-EN)

[2] Advantech B+B SmartWorx: User guide – Expansion port RS232

(MAN-0020-EN)

[3] Advantech B+B SmartWorx: User guide – Expansion port RS485/422

(MAN-0025-EN)

[4] Advantech B+B SmartWorx: User guide – Expansion port ETH

(MAN-0027-EN)

[5] Advantech B+B SmartWorx: User guide – Expansion port CNT

(MAN-0028-EN)

[6] Advantech B+B SmartWorx: User guide – Expansion port MBUSD

(MAN-0030-EN)

[7] Advantech B+B SmartWorx: User guide – Expansion port SWITCH

(MAN-0029-EN)

[8] Advantech B+B SmartWorx: User guide – Expansion port WIFI

(MAN-0031-EN)

[9] Advantech B+B SmartWorx: User guide – Expansion port WMBUS

(MAN-0032-EN)

[10] Advantech B+B SmartWorx: User guide – Expansion port SDH

(MAN-0026-EN)

Product related documents can be obtained on Engineering Portal at

https://ep.advantech-bb.cz/ address.

Autres manuels pour UR5i v2 Libratum

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Routeur réseau

Advantech

Advantech XR5i v2 Mode d’emploi

Advantech

Advantech SL305 Manuel utilisateur

Advantech

Advantech UR5i v2 Libratum Mode d’emploi

Advantech

Advantech ICR-3231 Manuel utilisateur

Advantech

Advantech SmartFlex SR307 Manuel utilisateur

Advantech

Advantech ICR-2041 Manuel utilisateur

Advantech

Advantech SmartFlex SR300 Manuel utilisateur

Advantech

Advantech B+B SmartWorx LR77 v2 Manuel utilisateur

Advantech

Advantech EKI-6538 Manuel utilisateur

Advantech

Advantech ICR-3831 Mode d’emploi

Advantech

Advantech B+B SmartWorx LR77 v2 Feuille d'instructions

Advantech

Advantech ICR-1601 Feuille d'instructions

Advantech

Advantech ICR-3211 Manuel utilisateur

Advantech

Advantech B+B SmartWorx AirborneM2M BB-ABDN-ER-DP553 Manuel utilisateur

Advantech

Advantech EDGE ER75i v2 Manuel utilisateur

Advantech

Advantech ICR-3201 Series Mode d’emploi

Advantech

Advantech SmartStart Series Mode d’emploi

Advantech

Advantech Libratum ICR-2834 Mode d’emploi

Advantech

Advantech IMC-150LI Manuel d'installation et d'exploitation

Advantech

Advantech AirborneM2M BB-ABDN-ER-DP553 Manuel utilisateur

Advantech

Advantech RR75i v2 Manuel utilisateur

Advantech

Advantech SmartStart SL302 Manuel utilisateur

Advantech

Advantech EKI2726FHPI Series Manuel d'installation et d'exploitation

Advantech

Advantech B+B SmartWorx SmartMotion ST355 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité