Advantech ASMB-BMC Manuel d'installation et d'exploitation

ASMB-BMC Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. ASMB-BMC module x 1

2. 2-year quality warranty card x 1 P/N: 2190000902

3. Startup manual x 1 P/N: 20060BMC00

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

ASMB-BMC

BMC Module IPMI 2.0

Startup Manual

Standard Functions

• ASMB-BMC is compliant with Intel IPMI 2.0 speciﬁcation

via IPMI connector on ASMB series server boards

• Support list: ASMB-781G4, ASMB-820I, ASMB-920IR,

ASMB-822I

Mechanical

• Dimensions: 36 mm x 15 mm

• Power supply type: 3.3 V, 5 V, 5 VSB

• Power requirements: 3.3 VSB

• Operating temperature: 0 ~ 60° C

• Operating humidity: 40° C @ 85% RH, Non-Condensing

• Storage temperature: -40 ~ 85° C

• Storage humidity: 60° C @ 95% RH, Non-Condensing

• Weight: 0.01 kg

Specications

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our

support website at:

http://www.advantech.com/suppot/

This manual is for the ASMB-BMC Series.

Part No. 20060BMC00

Print in China

1st Edition

July 2013

2 ASMB-BMC Startup Manual

1. Start to use ASMB-BMC by the following steps.

1). Connect ASMB-BMC to location “IPMI1”, reference

location please check the manual of server board.

Example: ASMB-781

2). ASMB-BMC.

IPMI1

Installation Guide

Jumpers and Connectors

There is one connector on the module to connect with

server board. The below table lists the function of this con-

nector.

Jumpers and connectors

Connectors

Label Function

CN2

IPMI connector

Pin Denitions

Pin Signal Pin Signal

1 FLA_SPICK 2 ASTSPI_CE0#

3 FLA_WPN 4 N/A

5 FLA_SPIDIO 6 GND

7 ROMA0

ASMB-BMC Startup Manual 3

2. After setting up the hardware conﬁguration, complete

the BIOS settings below.

1). Check the information below to ﬁnd out corre-

sponding commands to enable the BMC function.

Enter Server Mgmt, “BMC Support” and “Wait For

BMC” are [Enabled].

Enter BMC network conﬁguration, when “Conﬁgu-

ration Change Address source” is [Static], there is

a default IP address for ﬁrst time user setting.

For some server boards that provide two LAN

options for BMC, the BIOS screen will show LAN1

and LAN2 information in the BMC network conﬁgu-

ration screen.

Note: It will take 1 minute to initialize when ﬁrst time

connected to power on.

Installation Guide

3. Set the IP address to the same segment as the

connected LAN channel of ASMB-BMC in the

client computer.

4. Open a browser and log into GUI (Graphic User

Interface) of ASMB-BMC. Hyperlink Address is the

same as the connected LAN channel IP address

from the client computer.

Default user name and password

Username admin

Password admin

4 ASMB-BMC Startup Manual

Board Layout and Dimensions

Figure 1: ASMB-BMC Board Layout and Dimensions

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Advantech:

ASMB-BMC-00A1E

Autres manuels pour ASMB-BMC

Table des matières

Autres manuels Advantech Unité de contrôle

Advantech

Advantech Adam 4000 Series Manuel utilisateur

Advantech

Advantech ADAM-3016 Manuel utilisateur

Advantech

Advantech SOM-5892 Manuel utilisateur

Advantech

Advantech PCM-3380 Manuel d'installation et d'exploitation

Advantech

Advantech SOM-4466 Manuel utilisateur

Advantech

Advantech SOM-6898 Manuel utilisateur

Advantech

Advantech USB-4711A Manuel utilisateur

Advantech

Advantech SOM-5899 Manuel utilisateur

Advantech

Advantech PCM-3524 Manuel utilisateur

Advantech

Advantech EH-8100 Manuel utilisateur

Advantech

Advantech PCM-3680 Manuel d'installation et d'exploitation

Advantech

Advantech IPMI-2000 Manuel d'installation et d'exploitation

Advantech

Advantech MOS-2120-Z1101E Manuel utilisateur

Advantech

Advantech PCA-TPMSPI Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3910 Manuel d'installation et d'exploitation

Advantech

Advantech Network Device USB-4761 Manuel d'installation et d'exploitation

Advantech

Advantech AMAX-4800 Series Manuel utilisateur

Advantech

Advantech PCM-23C1CF Manuel utilisateur

Advantech

Advantech ADAM-3750 3-Wire Series Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3618 Manuel utilisateur

Advantech

Advantech ROM-7510 Manuel utilisateur

Advantech

Advantech EWM-W179M201E Manuel utilisateur

Advantech

Advantech PCM-24BXWF Manuel d'installation et d'exploitation

Advantech

Advantech AMAX-3285IO Manuel d'installation et d'exploitation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur