ACTi D21 Manuel utilisateur

www.acti.com

Encoder Firmware V4.06.09 User’s Manual

Box Camera Series

Hardware Manual

D21, D22, E21, E22, E23, E24

www.acti.com

Hardware Manual

2013/03/29

www.acti.com

Hardware Manual

Table of Contents

Precautions .............................................................4

Introduction............................................................5

The List of Models ................................................................................... 5

Package Contents .................................................................................... 6

Safety Instructions ................................................................................... 7

Physical Description ................................................................................. 8

Installation and Access ...........................................9

Camera Installation ................................................................................. 9

Accessing Camera .................................................................................. 11

www.acti.com

Hardware Manual

Precautions

Read these instructions

You should read all the safety and operating instructions before using this product.

Heed all warnings

You must adhere to all the warnings on the product and in the instruction manual.Failure to follow

the safety instruction given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this video device yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

All names used in this manual are probably registered trademarks of respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your local

office if you find any inaccuracies or omissions. We cannot be held responsible for any

typographical or technical errors and reserve the right to make changes to the product and

manuals without prior notice.

FCC/CE Regulation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the users will be required to correct the interference at their own

expense.

www.acti.com

Hardware Manual

Introduction

The List of Models

This hardware manual contains the following models:

D21

1MP Box with D/N, Fixed lens

1MP Box with D/N, Vari-focal lens

D22

5MP Box with D/N, Fixed lens

5MP Box with D/N, Vari-focal lens

E21

1MP Box with D/N, Basic WDR, Fixed lens

1MP Box with D/N, Basic WDR, Vari-focal lens

E22

5MP Box with D/N, Basic WDR, Fixed lens

5MP Box with D/N, Basic WDR, Vari-focal lens

E23

2MP Box with D/N, Basic WDR, SLLS, Vari-focal lens

E24

3MP Box with D/N, Superior WDR, Vari-focal lens

From the installation perspective these models are very similar; therefore you can use one

manual for all of them.

www.acti.com

Hardware Manual

Package Contents

1. Camera

D21, D22, E21, E22, E23, E24

2. Lens

Fixed focal lens with

manual focus and fixed iris

Vari-focal lens with manual focus

and DC iris

3. Mounting Block

Mounting block for mounting

the camera to a bracket.

4. Quick Installation Guide

5. Warranty Policy

www.acti.com

Hardware Manual

Safety Instructions

Cleaning

Disconnect this video product from the power supply before cleaning.

Attachments

Do not use attachments not recommended by the video product manufacturer as they may cause

hazards.

Water and Moisture

Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool and the like.

Do not use accessories not recommended by the manufacturer

Only install this device in a dry place protected from weather

Servicing

Do not attempt to service this video product yourself. Refer all servicing to qualified service

personnel.

Damage Requiring service

Disconnect this video product from the power supply immediately and refer servicing to qualified

service personnel under the following conditions.

1) When the power-supply cord or plug is damaged

2) If liquid has been spilled, or objects have fallen into the video product.

3) If the inner parts of video product have been directly exposed to rain or water.

4) If the video product does not operate normally by following the operating Instructions in this

manual.Adjust only those controls that are covered by the instruction manual, as an improper

adjustment of other controls may result in damage, and will often require extensive work by a

qualified technician to restore the video product to its normal operation.

Safety Check

Upon completion of any service or repairs to this video product, ask the service technician to

perform safety checks to determine if the video product is in proper operating condition.

www.acti.com

Hardware Manual

Physical Description

D2x, E2x Series

1) Ethernet Port

The IP device connects to the Ethernet via a standard RJ45 connector.

2) Reset Button

The purpose of reset button is to restore the factory default settings of the camera, including

administrator’s password.

The reset button can be used for following purposes:

1. The administrator’s password has been forgotten and therefore the camera cannot be

accessed.

2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to

modify these settings.

3. In case of connectivity issues or abnormal video quality.

How to do the reset properly?

Step 1: Disconnect the power supply (e.g.disconnect the Ethernet cable with PoE).

Step 2: Press and continue to hold the Reset Button (using a pin).

Step 3: Connect the power supply while keeping the Reset Button pressed.

Step 4: Wait for 45 seconds and release the Reset Button.

3) Power LED

When the Power LED is on, the camera is successfully powered on by PoE and the system is

running. It is possible to disable Power LED by URL command if necessary.

4) DC Iris Port

When the DC iris lens is used, the cable of the lens has to be connected to this port.

www.acti.com

Hardware Manual

Installation and Access

Camera Installation

The box camera may be installed indoors or outdoors (requires waterproof housing).

In both cases, the mounting block (included in the package) is needed.

Indoor Installation

For ceiling installations, the mounting block has to be mounted to the top side of the camera. For

wall installations, the mounting block has to be mounted to the bottom side of the camera.

An additional mounting bracket is needed to complete the installation (not included in the

package).You may use any of the local suppliers or purchase one from the camera manufacturer.

The following bracket is offered by the camera manufacturer:

This camera can be surface mounted without needing any additional accessories.Use the screws

from the screw pack and mount the camera to the surface using following screw holes.

Outdoor Installation

Outdoor installations require waterproof

housing and the heavy duty bracket.

The following housing solutions are

offered by the manufacturer:

The outdoor bracket can be mounted onto

the wall.

www.acti.com

Hardware Manual

For pole or corner installations, you may consider following solutions:

The housing can be either PMAX-0200, 0201 or PMAX-0202.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACTi Caméra de sécurité

ACTi

ACTi ACM-1430 series Manuel utilisateur

ACTi

ACTi B916 Manuel utilisateur

ACTi

ACTi KCM-3311 Manuel utilisateur

ACTi

ACTi B74 Manuel utilisateur

ACTi

ACTi CAM-6510 Manuel utilisateur

ACTi

ACTi ACM-1011 Series Manuel utilisateur

ACTi

ACTi A21 Manuel utilisateur

ACTi

ACTi KCM-3311 Manuel utilisateur

ACTi

ACTi ACM-3011 Instructions d'utilisation

ACTi

ACTi TCM-3511 Instructions d'utilisation

ACTi

ACTi KCM-8111 Manuel utilisateur

ACTi

ACTi TCM-1011 Instructions d'utilisation

ACTi

ACTi i51 Manuel utilisateur

ACTi

ACTi E48 Manuel utilisateur

ACTi

ACTi TCM-1231 Series Instructions d'utilisation

ACTi

ACTi VER. 061030 CAM-6500 Manuel utilisateur

ACTi

ACTi D61 Manuel utilisateur

ACTi

ACTi B412 Manuel utilisateur

ACTi

ACTi Outdoor Zoom Dome Series Manuel utilisateur

ACTi

ACTi B94A Manuel utilisateur

ACTi

ACTi E32 Manuel utilisateur

ACTi

ACTi I93 Manuel utilisateur

ACTi

ACTi E45 Manuel utilisateur

ACTi

ACTi Q13 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur