ACTi ACM-7511 Manuel utilisateur
Megapixel IP Dome
ACM-3401
Megapixel Day&Night IP Dome
ACM-3411
Ver. 080130
Quick Installation Guide
IP D/N CCD PoE Outdoor Rugged Dome
ACM-7511 series
Ver. 120312
Quick Installation Guide
0-1
0Getting Started
1.1 PACKAGE CONTENTS
ACM-7511
Product CD Terminal Blocks for Power, DI/O & Audio
Warranty Card Drill Template
Mount Screws BNC Cable
1
0-2
1.2 PHYSICAL DESCRIPTION
0-3
1. Reset Button
Step 1: Switch off IP device by disconnecting the power cable
Step 2: Press and continue to hold the Reset Button with a
pointed object. Reconnect the power cable while still holding the
reset button.
Step 3: Keep the reset button depressed for at least 16 seconds
before releasing it. The unit will then start up with factory default
settings.
2. Ethernet Port
The IP D/N CCD PoE Outdoor Rugged Dome connects to the
Ethernet via a standard RJ45 connector. This camera can
automatically detect the best network speed when connected to
other auto-negotiation(NWAY) supported devices.
(10Base-T/100Base-TX Ethernet).
3. Analog Video Output
The IP D/N CCD PoE Outdoor Rugged Dome supports one
channel analog video output via a special BNC cable that came
with the accessory pac
4. Power Input Audio & Digital input/output
PIN
NAME
DESCRIPTION
1
DIO PW
DC12VIN
2
DIO GND
DGND
3
DO
DO1_TO_OUTSIDE
4
DI
DI1_FROM_OUTSIDE
5
AO_GND
DGND
6
A_OUT
Audio_OUT_LR
7
AI_GND
DGND
8
A_IN
Audio_IN
0-4
5. Power Input
Connect the power adaptor here if your power input is DC12V.
Please follow the description on the connector to connect to
power.
6. Conduit Hole
These conduit holes provide alternative cable routing choices for
different mounting scenarios.
PIN
NAME
DESCRIPTION
1
12V
DC Power Input
2
GND
Ground Pin
0-1
1.3 BASIC CONNECTIONS
Follow the procedures below to connect the IP device to the respective
apparatuses.
1. Connect an analog monitor to IP device video out via special BNC Cable
that came with the accessory pack.
2. Connect the power adaptor to IP device
3. Connect IP rugged dome’s ethernet port to an Ethernet (RJ45 connectors).
If your IP rugged dome supports Power Over Ethernet (PoE), you may
connect it directly to a PoE supported switch, a PoE injector connected to a
switch or other Power Source Equipments(PSE)
4. Connect a PC to the Ethernet hub (RJ45 connectors)
NOTE: For more detailed explanations, we provide a support
package that clarifies PoE related concepts for you. Please visit our
web site and download the support document TS-00040.
1-2
1Quick Tour
This section guides you with a quick tour on this IP device.
2.1 Configure this IP Device
2.1.1 Make sure network environment
Default IP of this IP device is 192.168.0.100. Please make sure this IP device and
your PC are on the same network segment before running the installation.
2
Please set the settings as below.
IP address: 192.168. 0.xxx
Subnet mask: 255.255.255. 0
(NOTE: xxx should be a number
from 1 to 254 except 100, which
is used by the IP device. Please
also make sure that no two
equipments use the same IP
address in the same network..)
1-3
2.1.2 Open Internal Explorer with IP address
2.1.3 Login with default administrator’s account & password
NOTE: Default administrator account is set to Admin, password is set to
123456, and click button.
NOTE: Internet Explorer 6.0 or above is highly recommended. You
may download it from
http://www.microsoft.com/windows/ie/downloads/default.mspx
The default IP address for this device is 192.168.0.100
1-4
2.1.4 Preview the video
2.1.5 Set the new IP address
Autres manuels pour ACM-7511
2
Table des matières
Autres manuels ACTi Caméra de sécurité
ACTi
ACTi E911 Manuel utilisateur
ACTi
ACTi I99 Manuel utilisateur
ACTi
ACTi Q960 Manuel utilisateur
ACTi
ACTi D61A Manuel utilisateur
ACTi
ACTi Outdoor Zoom Dome Series Manuel utilisateur
ACTi
ACTi A950 Manuel utilisateur
ACTi
ACTi E31 Manuel utilisateur
ACTi
ACTi ACM-3511 Manuel utilisateur
ACTi
ACTi A310 Manuel utilisateur
ACTi
ACTi E98 Manuel utilisateur
ACTi
ACTi ACM-1100 Series Manuel utilisateur
ACTi
ACTi KCM-5111 Guide rapide
ACTi
ACTi Z83 Manuel utilisateur
ACTi
ACTi D71 Manuel utilisateur
ACTi
ACTi D21F Manuel utilisateur
ACTi
ACTi Q115 Manuel utilisateur
ACTi
ACTi B61 Manuel utilisateur
ACTi
ACTi E45 Manuel utilisateur
ACTi
ACTi Z39 Manuel utilisateur
ACTi
ACTi VER. 061030 CAM-6500 Instructions d'utilisation
