ACTi ACM-7411 Series Manuel utilisateur

MegaPixel IP Outdoor Rugged Dome

(with DC 12V / PoE)

ACM-7411 series

Ver. 080415

Quick Installation Guide

0-1

0Getting Started

1.1 PACKAGE CONTENTS

ACM-7411 series Power Adaptor (Option)

(DC12V / PoE )

Product CD Terminal Blocks for Power, DI/O & Audio

Warranty Card Accessory

1

0-2

1.2 PHYSICAL DESCRIPTION

0-3

1. Ethernet Port

The IP device connects to the Ethernet via a standard RJ45

connector. Supporting NWAY, this IP device can auto detect the

speed of local network segment (10Base-T/100Base-TX

Ethernet).

2. Power Input

If your power input is DC12V. Please follow the description on the

connector to connect to power.

3. Power Input Audio & DIO input/output

PIN NAME DESCRIPTION

1 12V DC Power Input

2 GND Ground Pin

PIN NAME DESCRIPTION

1 DIO PW DC12VIN

2 DIO GND DGND

3 DO

DO1_TO_OUTSIDE

4 DI

DI1_FROM_OUTSIDE

5 AO_GND DGND

6 A_OUT

Audio_OUT_LR

7 AI_GND DGND

8 A_IN

Audio_IN

0-4

4. Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button. Reconnect the

power cable while continuing to hold the reset button.

Step 3: Keep holding the reset button depressed around 6 seconds,

release the reset button. The unit will start up with factory default

settings.

5. Conduit Hole

These conduit holes are used for cables to go through.

1.3 INSTALLATION PROCEDURE

There are three types of installation of this IP outdoor rugged dome series.

Surface mount Flush mount Wall mount

Pictures

Optional Bracket

required

●●

The mounting procedure can be divided into two parts,

1st: Connect the IP outdoor rugged dome series

2nd: Mount the IP outdoor rugged dome series

0-5

1.3.1 Connect the IP Outdoor Rugged Dome

1.3.1.1 Remove the cover

Remove the dome cover with special hex wrench in the accessory bag.

1.3.1.2 Insert the cabl

There are two conduit holes, one is at the dome bottom and the other one is

at the side of rugged dome with plug. Remove the plug if your cable will go

through the one at the side of rugged dome

0-6

1.3.1.3 Connect cables to connectors

Please follow the instruction at Chapter 2: Physical Description, for how to

connect to each connector.

1.3.1.4 LED Description

There are three LEDs in the system. They are indicators for power, fan and

heater respectively. According to operating temperature, the different LED

will be lighted for different situation.

0-7

1.4 Mount the IP Outdoor Fixed Dome (Surface)

0-8

1.5 Mount the IP Outdoor Fixed Dome (Flush)

0-9

1.6 Mount the IP Indoor Fixed Dome (Wall)

Autres manuels pour ACM-7411 Series

4

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels ACTi Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur