ACTi Zoom Box Camera Series Manuel utilisateur

Zoom Box Camera Series

Hardware Manual

E213, E215, E219, E223

2016/02/16

www.acti.com

Hardware Manual

Table of Contents

Precautions.............................................................4

Safety Instructions .................................................................................... 6

Introduction.............................................................7

The List of Models..................................................................................... 7

Package Contents...................................................................................... 8

Physical Description ................................................................................. 9

Mounting Options.....................................................................................11

Indoor Installation Procedures............................13

Step 1: Attach the Mounting Block......................................................... 13

Step 2: Mount the Indoor Bracket .......................................................... 14

Step 3: Attach the Camera to the Bracket ............................................. 14

Step 4: Connect the Cable(s).................................................................. 16

Step 5: Access the Camera Live View.................................................... 18

Other Cable Connections.....................................19

Connecting a Power Adapter (Optional)................................................ 19

How to Connect DI/DO and Audio Devices (Optional).......................... 21

How to Connect DI/DO Devices............................................................ 21

How to Connect Audio Devices............................................................. 24

How to Connect a Serial Device............................................................. 25

Other Adjustments and Accessories ..................27

How to Install / Remove the Memory Card ............................................ 27

www.acti.com

Hardware Manual

How to Insert the Memory Card ............................................................ 27

How to Remove the Memory Card........................................................ 27

Accessing the Camera .........................................28

Configure the IP Addresses.................................................................... 28

Access the Camera.................................................................................. 32

www.acti.com

Hardware Manual

Precautions

Read these instructions

You should read all the safety and operating instructions before using this product.

Heed all warnings

You must adhere to all the warnings on the product and in the instruction manual. Failure to follow

the safety instruction given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

ACTi andACTi logo are registered trademarks of ACTi Corporation. All other names and products

used in this manual are registered trademarks of their respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your local

office if you find any inaccuracies or omissions. ACTi will not be held responsible for any

typographical or technical errors and reserves the right to make changes to the product and

manuals without prior notice.

www.acti.com

Hardware Manual

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to the equipment that are not expressly approved by the

responsible party for compliance could void the user’s authority to operate the equipment.

European Community Compliance Statement

This product has been tested and found to comply with the limits for Class B

Information Technology Equipment according to European Standard EN 55022

and EN 55024. In a domestic environment, this product may cause radio interference in which

cause the user may be required to take adequate measures.

www.acti.com

Hardware Manual

Safety Instructions

Cleaning

Disconnect this product from the power supply before cleaning.

Accessories and Repair Parts

Use only the accessories and repair parts recommended by the manufacturer.

Location

Install this device in a dry place protected from weather.

Servicing

Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

Damage Requiring service

Disconnect this product from the power supply immediately and refer servicing to qualified

service personnel under the following conditions.

1) When the power-supply cord or plug is damaged

2) If liquid has been spilled, or objects have fallen into the product.

3) If the inner parts of product have been directly exposed to rain or water.

4) If the product does not operate normally by following the operating Instructions in this manual.

Adjust only those controls that are covered by the instruction manual, as an improper

adjustment of other controls may result in damage, and will often require extensive work by a

qualified technician to restore the product to its normal operation.

Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine if the product is in proper operating condition.

www.acti.com

Hardware Manual

Introduction

The List of Models

This hardware manual contains the following models:

E213

5MP Zoom Box with D/N, Basic WDR, 10x Zoom lens

E215

3MP Zoom Box with D/N, Superior WDR, 10x Zoom lens

E219

2MP Video Analytics Zoom Box with D/N, Extreme WDR, SLLS,

10x Zoom lens

E223

1.3MP Zoom Box with D/N, Superior WDR, 10x Zoom lens

From the installation perspective, these models are very similar; therefore one manual is used for

all of them.

www.acti.com

Hardware Manual

Package Contents

Camera

Audio and DI/DO

Terminal Block

Serial Port Terminal Block

(for E23B only)

Mounting Block

with Screws

Quick Installation Guide

Warranty Card

NOTE: The pictures are for reference only, actual items may slightly vary in appearance.

www.acti.com

Hardware Manual

Physical Description

Item

Description

Serial Port

This port connects to serial devices via RS-485 or

RS-422 protocols. Use the supplied serial port

terminal block to connect the wires from the serial

device to the camera.

See How to Connect a Serial Device on page 25

for connection details.

Ethernet Port

Connects to a network using an Ethernet cable.

Memory Card Slot

Insert a memory card into this slot for local

recording purposes. See How to Install / Remove

the Memory Card on page 27 for more

information.

NOTE: Supports microSDHC and microSDXC

cards.

Reset Button

Restores the factory default settings of the

camera. Resetting the camera must be done while

the power is on. Using a pointed object, such as a

paper clip, press and hold the Reset Button for at

least 5 seconds or until the Power LED goes off .

Power LED

The Power LED turns on when the camera is

powered on and the system is running.

www.acti.com

Hardware Manual

Item

Description

Digital Input / Output

(DI/DO) and Audio

Input / Output

This connector connects to digital input or output

devices, such as an alarm trigger, panic button,

etc., as well as audio input and output devices,

such as microphones and speakers. Digital Input

(DI) and Digital Output (DO) devices are used in

applications like motion detection, event

triggering, alarm notifications, etc. See How to

Connect DI/DO and Audio Devices (Optional)

on page 21 for more information.

DC 12V Power Input

(E219 Only)

In case the camera is connected to a non-PoE

(Power over Ethernet) switch, use this connector

to connect an external adaptor (not included) to

the camera. See Connecting a Power Adapter

(Optional) on page 19 for more information.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACTi Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur