Zte MF29A Manuel utilisateur

1

ZTE MF29A

Wireless Router

User Guide

2

LEGAL INFORMATION

Copyright © 2012 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or utilized in

any form or by any means, electronic or mechanical, including photocopying and

microlm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modi-

cations on print errors or update specications without prior notice.

Version No. : R1.0

Edition Time: 2012-11

Manual No.: 079584505291

3

Getting Started

The router operates on the HSUPA+/HSUPA/HSDPA/WCDMA networks and GSM/

GPRS/EDGE networks and supports voice and data service.

Appearance

4

Indicators

Indicator State Description

1 WAN signal

strength indi-

cation

On Signal strength is very good or good (RSSI >=

-90dBm)

Blinking Signal strength is weak (-100dBm < RSSI <

-90dBm)

Off No signal

2 Network

mode indica-

tion

Blue Registered to 3G network

Red Registered to 2G network

Off Not Registered

3 WAN con-

nection status

indication

On WAN connection established (PDP activated)

Blinking WAN connection establishing (PDP activating)

Off WAN connection not established (PDP not

activated)

4 Phone sta-

tus indication

Off PSTN not connected

Blinking Calling via PSTN

On PSTN connected

5 Phone sta-

tus indication

Off Local phone hang up

Blinking Phone picked up, ringing or network CS regis-

tering

On In calling

5

Indicator State Description

6 Wi-Fi

indication

Off WLAN shut down

Blinking WLAN working normally with data transmission

7 Power

indication

On External power supply working normally.

Off External power supply disconnected or pow-

ered off.

Interface Description

1. Phone Standard RJ11 connector for Telephone

2. PSTN Standard RJ11 connector for PSTN

3. WAN/LAN Ethernet connector to Internet

4. LAN1~LAN3 Ethernet connector to computer

5. Reset Reset button

6. POWER

Socket Connector to the external power supply.

7. ON/OFF Turn the router ON or OFF.

8. ANT Connector to external antenna

9. PRESS ANT

ON

This button is only used for external antenna. If you connect the

external antenna, please press it. Otherwise the RSSI signal

of the router will be poor, and your device may not access the

Internet.

6

Connecting Your Device

Follow the number to connect your device.

NOTE: If you want to use the mobile network to go to Internet, you need to insert

your SIM card rst.

Switching on Your Device

1. Turn the power switch on to get started. Make sure that the phone is on hook

before you power it on.

7

NOTE: Do not put anything on the top of the router. Do not lay routers to overlap

each other during usage.

2. Wait 1~2 minutes after turning the router on before you use the service. The

3G & POWER indicator should be lit on.

NOTES:

• When the router is turned off, an incoming caller will hear the prompt like “The

number you have dialed is currently unavailable.”

• If the 3G LED is blinking constantly, try to move the router to another location.

The router takes 1~2 minutes to initialize, attach to the network and obtain an

IP address.

Power Supply

For normal operation, connect the router to the external power adapter. In case of

power failure or when there is no available external power supply, the router will not

work.

About (U)SIM Card

Avoid handling the (U)SIM card unnecessarily. Hold the card by the edges to pre-

vent static damage. Keep the (U)SIM card away from electrical and magnetic appli-

ances.

If you cannot get service, make sure that

• You are in an area which has network coverage.

• You are using the correct (U)SIM card.

8

Internet Access

Conguring Your PC

Follow the following steps and gures for Windows XP to congure the Internet

Protocol for your connection.

NOTES:

• Wireless Network Connection is used for Wi-Fi connection.

• Local Area Connection is used for Network Cable connection.

1. Right-click My Network Places, and then select Properties.

9

2. Right-click the icon for Connection, and then select Properties.

3. Select Internet Protocol(TCP/IP), and then click Properties.

10

4. Select these two items, and then click OK to nish the conguration.

Autres manuels pour MF29A

3

Table des matières

Autres manuels Zte Routeur réseau

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité