Zte T3000 Manuel utilisateur

1

T3000

Let’s go

Getting started with your device.

2

1. Connect Your Device

Connect the WAN/LAN4 port to the broadband service network port with a

network cable.

3

2. Power on Your Device

Connect the original power adapter to your device and then your device will be

powered on and connect to the Internet automatically.

4

3. Access the Internet

Wi-Fi: Get the default SSID and password on the label and connect to the

Wi-Fi network with your mobile device, and then access the Internet.

5

Network cable(RJ45): Connect with the computer via LAN ports and then

access the Internet.

6

Manage Your Device

You can manage the device by logging in to the configuration web page.

1. View the label on your device to get the default Device Manager Website IP

address and Password.

2. Launch the Internet browser and enter the Device Manager Website IP

address in the address bar.

3. Input the password and then click Login.

4. After the configuration web page is opened, you can change the Wi-Fi SSID,

password or other settings.

7

Mesh Network Function

Your device has the Wi-Fi Mesh ability. You can create Wi-Fi Mesh network to

form a larger range of Wi-Fi network in your house and ensure seamless Wi-Fi

roaming when you move.

8

To set your mesh network:

1. Log in to the management web page.

2. Click Mesh Network icon .

3. Follow the instructions to create your mesh network.

4. Enjoy your mesh network.

9

Indicator Lights and Interfaces

10

1

LAN ports

Connect to a PC.

2

WAN/LAN

ports

WAN/LAN4: Connect to a WAN in the single WAN mode.

WAN/LAN3: If you want to use two WAN connections, you need to switch to the

Multi WAN mode on the management web page and then connect the other WAN

to the WAN/LAN3 port.

3

Power port

Connect to the original power adapter.

4

WPS key

Press and hold for about 2 seconds to activate the WPS function or create the

mesh network.

5

NFC area

When you bring your NFC-enabled phone and the device together, follow the

instructions on your phone to connect to the Wi-Fi network without entering the

password.

6

Indicator

Red blinking:

The device is being started.

The device is being restored to the factory settings.

Red on: The WAN is not connected.

White blinking:

WPS is activating.

The mesh network is being created.

White on: The WAN is connected.

Off: The power adapter is not connected.

7

RESET

Press and hold for about 3 seconds to restore your device to the factory settings.

Autres manuels pour T3000

1

Table des matières

Autres manuels Zte Routeur réseau

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité