ZKTeco Ma 300 Manuel utilisateur

MA300 User Manual

Thank you for choosing our product. Please read the instructions

carefully before operation. Follow these instructions to ensure that the

product is functioning properly. The images shown in this manual are for

illustrative purposes only.

For further details, please visit our Company’s website

www.zkteco.com.

User Manual

MA300

Date: March 2023

Doc Version: 3.1

English

MA300 User Manual

Without the prior written consent of ZKTeco, no portion of this manual can be

copied or forwarded in any way or form. All parts of this manual belong to

ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").

Trademark

is a registered trademark of ZKTeco. Other trademarks involved in

this manual are owned by their respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the

ZKTeco equipment. The copyright in all the documents, drawings, etc. in

relation to the ZKTeco supplied equipment vests in and is the property of

ZKTeco. The contents hereof should not be used or shared by the receiver

with any third party without express written permission of ZKTeco.

The contents of this manual must be read as a whole before starting the

operation and maintenance of the supplied equipment. If any of the content(s)

of the manual seems unclear or incomplete, please contact ZKTeco before

starting the operation and maintenance of the said equipment.

It is an essential pre-requisite for the satisfactory operation and maintenance

that the operating and maintenance personnel are fully familiar with the

design and that the said personnel have received thorough training in

operating and maintaining the machine/unit/equipment. It is further essential

for the safe operation of the machine/unit/equipment that personnel has

read, understood and followed the safety instructions contained in the

manual.

MA300 User Manual

In case of any conflict between terms and conditions of this manual and the

contract specifications, drawings, instruction sheets or any other

contract-related documents, the contract conditions/documents shall prevail.

The contract specific conditions/documents shall apply in priority.

ZKTeco offers no warranty, guarantee or representation regarding the

completeness of any information contained in this manual or any of the

amendments made thereto. ZKTeco does not extend the warranty of any kind,

including, without limitation, any warranty of design, merchantability or

fitness for a particular purpose.

ZKTeco does not assume responsibility for any errors or omissions in the

information or documents which are referenced by or linked to this manual.

The entire risk as to the results and performance obtained from using the

information is assumed by the user.

ZKTeco in no event shall be liable to the user or any third party for any

incidental, consequential, indirect, special, or exemplary damages, including,

without limitation, loss of business, loss of profits, business interruption, loss

of business information or any pecuniary loss, arising out of, in connection

with, or relating to the use of the information contained in or referenced by

this manual, even if ZKTeco has been advised of the possibility of such

damages.

This manual and the information contained therein may include technical,

other inaccuracies or typographical errors. ZKTeco periodically changes the

information herein which will be incorporated into new

additions/amendments to the manual. ZKTeco reserves the right to add,

delete, amend or modify the information contained in the manual from time

to time in the form of circulars, letters, notes, etc. for better operation and

safety of the machine/unit/equipment. The said additions or amendments are

meant for improvement /better operations of the machine/unit/equipment

and such amendments shall not give any right to claim any compensation or

MA300 User Manual

damages under any circumstances.

ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment

malfunctions due to any non-compliance of the instructions contained in this

manual (ii) in case of operation of the machine/unit/equipment beyond the

rate limits (iii) in case of operation of the machine and equipment in

conditions different from the prescribed conditions of the manual.

The product will be updated from time to time without prior notice. The latest

operation procedures and relevant documents are available on

http://www.zkteco.com.

If there is any issue related to the product, please contact us.

ZKTeco Headquarters

Address ZKTeco Industrial Park, No. 32, Industrial Road,

Tangxia Town, Dongguan, China.

Phone +86 769 - 82109991

Fax +86 755 - 89602394

For business related queries, please write to us at: sales@zkteco.com.

To know more about our global branches, visit www.zkteco.com.

MA300 User Manual

About the Company

ZKTeco is one of the world’s largest manufacturer of RFID and Biometric

(Fingerprint, Facial, Finger-vein) readers. Product offerings include Access

Control readers and panels, Near & Far-range Facial Recognition Cameras,

Elevator/Floor access controllers, Turnstiles, License Plate Recognition (LPR)

gate controllers, and Consumer products including battery-operated

fingerprint and face-reader door locks. Our security solutions are multi-lingual

and localized in over 18 different languages. At the ZKTeco state-of-the-art

700,000 square foot ISO9001-certified manufacturing facility, we control

manufacturing, product design, component assembly, and logistics/shipping,

all under one roof.

The founders of ZKTeco have been determined for independent research and

development of biometric verification procedures and the productization of

biometric verification SDK, which was initially widely applied in PC security

and identity authentication fields. With the continuous enhancement of the

development and plenty of market applications, the team has gradually

constructed an identity authentication ecosystem and smart security

ecosystem, which are based on biometric verification techniques. With years

of experience in the industrialization of biometric verifications, ZKTeco was

officially established in 2007 and now has been one of the globally leading

enterprises in the biometric verification industry owning various patents and

being selected as the National High-tech Enterprise for 6 consecutive years. Its

products are protected by intellectual property rights.

About the Manual

This manual introduces the operations of MA300.

All figures displayed are for illustration purposes only. Figures in this manual

may not be exactly consistent with the actual products.

MA300 User Manual

Document Conventions

This document includes such notational conventions as tips, important

notices, and precautions. The notations contained in this manual include:

: indicates important information, including precautions, which must be

read carefully to achieve the optimal equipment performance.

: indicates the voice prompt generated by the device. In the event of

discrepancy between the voice prompts in this document and those

generated by the actual products, the latter shall prevail.

MA300 User Manual

Table of Contents

1INSTRUCTION FOR USE ............................................................................... 8

FINGER POSITIONING...........................................................................................................81.1

INSTRUCTION FOR CARD SWIPE..........................................................................................91.2

CAUTIONS.............................................................................................................................91.3

2INTRODUCTION OF ACCESS CONTROL DEVICE ....................................... 10

OVERVIEW OF DEVICE FUNCTIONS.................................................................................. 102.1

PRODUCT APPEARANCE................................................................................................... 112.2

VERIFICATION STATE ......................................................................................................... 132.3

MANAGEMENT CARD ....................................................................................................... 142.4

OPERATION TIMEOUT ....................................................................................................... 152.5

3DEVICE OPERATIONS ................................................................................ 16

MANAGEMENT CARD ....................................................................................................... 163.1

3.1.1 Enroll Management Card .................................................................................16

3.1.2 Enroll Ordinary User...........................................................................................17

3.1.3 Delete a Single User............................................................................................23

USER VERIFICATION........................................................................................................... 263.2

U-DISK ............................................................................................................................... 283.3

TAMPER SWITCH................................................................................................................ 293.4

4WEBSERVER ............................................................................................... 31

LOGIN................................................................................................................................. 314.1

DEVICE ............................................................................................................................... 334.2

4.2.1 Device Status.......................................................................................................33

4.2.2 Change Password...............................................................................................33

SETTINGS ........................................................................................................................... 344.3

4.3.1 Comm Settings....................................................................................................34

4.3.2 Cloud Settings .....................................................................................................35

MA300 User Manual

4.3.3 System Settings...................................................................................................36

4.3.4 Data Management ............................................................................................36

4.3.5 Date and Time.....................................................................................................37

4.3.6 Operation Log .....................................................................................................37

4.3.7 Wiegand Setup....................................................................................................38

DEVICE MANAGEMENT..................................................................................................... 414.4

4.4.1 Update and Reset ...............................................................................................41

4.4.2 Load Certificate...................................................................................................42

5CONNECT TO ZKBIOACCESS IVS SOFTWARE............................................ 43

SET THE COMMUNICATION ADDRESS.............................................................................. 435.1

ADD DEVICE TO THE SOFTWARE ...................................................................................... 445.2

ADD PERSONS TO THE SOFTWARE................................................................................... 455.3

6APPENDIX .................................................................................................. 47

LIST OF PARAMETERS........................................................................................................ 476.1

PRIVACY POLICY................................................................................................................ 486.2

ECO-FRIENDLY OPERATION .............................................................................................. 526.3

MA300 User Manual

1Instruction for Use

Before getting into the device’s features and functions, it is recommended to

be familiar with the below fundamentals.

Finger Positioning1.1

Recommended fingers: Index, middle, or ring fingers; Avoid using your

thumb or pinky on the fingerprint reader because they are difficult to press

accurately.

Note: Please use the correct method when pressing your fingers onto the

fingerprint reader for registration and identification. Our company will

assume no liability for recognition issues that may result from incorrect usage

of the product. We reserve the right of final interpretation and modification

concerning this point.

Too close to the edge

Vertical

Too low

MA300 User Manual

Instruction for Card Swipe1.2

Integrated with a non-contact RF card reader module, this device supports

the ID cards and IC / HID cards (optional). By offering multiple verification

modes such as fingerprint verification and RF card verification, this device can

accommodate diversified user needs.

Swipe your card across the sensor area following the voice prompt and

remove your card after the device has sensed it. For the swipe area, see 2.2

Product Appearance.

Cautions1.3

Protect the device from exposure to direct sunlight or strong beam, as strong

beam greatly affects the fingerprint collection and leads to fingerprint

verification failure.

To produce the best results, the device should be used at temperatures

ranging from 0°C to 50°C. It is advised to adopt a sunshade and heat

dissipation facilities if the device will be exposed to the outdoors for an

extended length of time, as extremely high or low temperatures will slow

down the device's performance and result in a high false rejection rate (FRR)

and false acceptance rate (FAR).

When installing the access control device, please connect the power cable

after connecting other cables. If the device does not operate properly, be sure

to shut down the power supply before performing the necessary inspection.

Note that any live-line working may cause damage to the device and the

device damage arising out of live-line working falls beyond the scope of our

normal warranty.

For matters that are not covered in this document, please refer to related

documents including the Installation Guide, and ZKBioAccess IVS User

Manual.

Autres manuels pour ma 300

Table des matières

Autres manuels ZKTeco Terminal tactile

ZKTeco

ZKTeco SpeedFace M4 Manuel utilisateur

ZKTeco

ZKTeco LockerPad-7B Manuel utilisateur

ZKTeco

ZKTeco LPRS2000 Manuel utilisateur

ZKTeco

ZKTeco EFace10 Manuel utilisateur

ZKTeco

ZKTeco LPRS2000 Manuel utilisateur

ZKTeco

ZKTeco S922 Series Manuel utilisateur

ZKTeco

ZKTeco ZKAIO1000W Manuel utilisateur

ZKTeco

ZKTeco ZK75 Series Manuel utilisateur

ZKTeco

ZKTeco FaceKiosk-H10A Manuel utilisateur

ZKTeco

ZKTeco ZKBio710 Series Manuel utilisateur

ZKTeco

ZKTeco Green Label ProCapture-T Manuel utilisateur

ZKTeco

ZKTeco ZKAIO4000W Manuel utilisateur

ZKTeco

ZKTeco FA2000 Manuel utilisateur

ZKTeco

ZKTeco G2 Manuel utilisateur

ZKTeco

ZKTeco iClock 885 Manuel utilisateur

ZKTeco

ZKTeco SpeedFace V4LTI Manuel utilisateur

ZKTeco

ZKTeco RevFace15 Manuel utilisateur

ZKTeco

ZKTeco ZKBio930 Manuel utilisateur

ZKTeco

ZKTeco ZPAD+ Manuel utilisateur

ZKTeco

ZKTeco ZKBio910 Manuel utilisateur

ZKTeco

ZKTeco G5 Manuel utilisateur

ZKTeco

ZKTeco ProBio(QR) Manuel utilisateur

ZKTeco

ZKTeco D3 Series Manuel utilisateur

ZKTeco

ZKTeco uFace Plus Series Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

ZKTeco ma 300 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques