WIKA Ls-10 Manuel utilisateur

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Submersible pressure transmitter, model LS-10

Pegelsonde, Typ LS-10

Submersible pressure transmitter, model LS-10

Transmetteur de pression immergeable, type LS-10

Sonda de pozo, modelo LS-10

2WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

Operating instructions model LS-10 Page 3 - 16

Betriebsanleitung Typ LS-10 Seite 17 - 30

Mode d'emploi type LS-10 Page 31 - 44

Manual de instrucciones modelo LS-10 Página 45 - 58

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d'emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

3WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

Contents

1. General information 4

2. Safety 5

3. Specications 8

4. Design and function 9

5. Transport, packaging and storage 10

6. Commissioning, operation 11

7. Maintenance and cleaning 12

8. Faults 13

9. Dismounting, return and disposal 14

Declarations of conformity can be found online at www.wika.com.

4WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

1. General information

■

The submersible pressure transmitter described in the operating instructions has been designed and manufactured

using state-of-the-art technology. All components are subject to stringent quality and environmental criteria during

production. Our management systems are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument.Working safely requires that

all safety instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range

of use.

■

The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and

readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended

use, non-compliance with these operating instructions, assignment of insuciently qualied skilled personnel or

unauthorised modications to the instrument.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.55

- Application consultant: Tel.: +49 9372 132-8976

Fax: +49 9372 132-8008976

[email protected]

5WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or damage to equipment or the

environment, if not avoided.

Information

... points out useful tips, recommendations and information for ecient and trouble-free operation.

WARNING!

... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids, if

not avoided.

2. Safety

WARNING!

Before installation, commissioning and operation, ensure that the appropriate submersible pressure trans-

mitter has been selected in terms of measuring range, design and specic measuring conditions.

Non-observance can result in serious injury and/or damage to the equipment.

Further important safety instructions can be found in the individual chapters of these operating instructions.

2.1 Intended use

The submersible pressure transmitter is used to convert hydrostatic pressure into an electrical signal.

The instrument is suitable for operation within an ambient temperature range from -10 ... +50 °C.

The instrument has been designed and built solely for the intended use described here, and may only be used

accordingly.

1. General information / 2. Safety

6WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

The technical specications contained in these operating instructions must be observed. Improper handling or opera-

tion of the pressure transmitter outside of its technical specications requires the instrument to be taken out of service

immediately and inspected by an authorised WIKA service engineer.

The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.

2.2 Personnel qualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and damage to equipment.

The activities described in these operating instructions may only be carried out by skilled personnel who

have the qualications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement

and control technology and on their experience and knowledge of country-specic regulations, current standards and

directives, are capable of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

2.3 Special hazards

WARNING!

For hazardous media such as acetylene, ammable or toxic gases and liquids, etc., in addition to all

standard regulations, the appropriate existing codes or regulations must also be followed.

WARNING!

Residual media in dismounted submersible pressure transmitters can result in a risk to persons, the

environment and equipment.

Take sucient precautionary measures.

Do not use this instrument in safety or emergency stop devices. Incorrect use of the instrument can result in

injury.

2. Safety

7WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

If the serial number becomes illegible due to mechanical damage or overpainting, traceability will no longer be

possible.

Explanation of symbols

CE, Communauté Européenne

Instruments bearing this mark comply with the relevant European directives.

CSA, Canadian Standard Association®

The instrument has been inspected and certied by CSA International. Instruments bearing this mark

comply with the applicable Canadian standards on safety (including explosion protection).

2. Safety

2.4 Labelling, safety marking

Product label

see explanation of symbolsModel

Measuring range

Output signal

Power supply

S# serial number

P# product number

Pin assignment

8WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

3. Specications

Measuring ranges

Relative pressure

bar Measuring range 0 ... 0.25 0 ... 0.4 0 ... 0.6 0 ... 1 0 ... 1.6

Overpressure limit 2 2 3 5 8

Burst pressure 2.4 2.4 4 610

Measuring range 0 ... 2.5 0 ... 4 0 .. 6 0 ... 10

Overpressure limit 8 10 10 10

Burst pressure 10 10 10 10

inWC Measuring range 0 ... 100 0 ... 150 0 ... 250

Overpressure limit 750 750 1,100

Burst pressure 950 950 1,600

psi Measuring range 0 ... 5 0 ... 10 0 ... 15 0 ... 25 0 ... 50

Overpressure limit 30 45 70 120 150

Burst pressure 35 60 90 180 150

Measuring range 0 ... 100 0 ... 160

Overpressure limit 150 160

Burst pressure 150 160

mH2O Measuring range 0 ... 2.5 0 ... 4 0 ... 6 0 ... 10 0 ... 16

Overpressure limit 20 20 30 50 80

Burst pressure 24 24 40 60 100

Measuring range 0 ... 25 0 ... 40 0 ... 60 0 ... 100

Overpressure limit 80 100 100 100

Burst pressure 100 100 100 100

The given measuring ranges are also available in mbar, kPa and MPa.

9WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

Analogue signal

4 ... 20 mA

Power supply

DC 10 ... 30 V

Ingress protection (per IEC 60529)

IP 68

Permissible temperature ranges

■

Medium: -10 ... +50 °C

■

Ambient: -10 ... +50 °C

■

Storage: -30 ... +80 °C

Immersion depth

up to 100 m

CE conformity

EMC directive, EN 61326 emission (group 1, class B)

and immunity (industrial application)

For special model numbers, e.g. LS-10000, please note the specications stated on the delivery note.

For further specications see WIKA data sheet PE 81.55 and the order documentation.

4. Design and function

4.1 Description

The prevailing pressure is measured at the sensor element through the deformation of a diaphragm. By supplying

power, this deformation of the diaphragm is converted into an electrical signal.The output signal from the pressure

transmitter is amplied and proportional to the prevailing pressure.

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

3. Specications / 4. Design and function

10 WIKA operating instructions submersible pressure transmitter, model LS-10

14075012.03 03/2018 EN/DE/FR/ES

5. Transport, packaging and storage

5.1 Transport

Check the submersible pressure transmitter for any damage that may have been caused by transport.

Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change in installation site, sending for

repair).

5.3 Storage

Permissible conditions at the place of storage:

Storage temperature: -30 ... +80 °C

Mount the protection cap for storing the submersible pressure transmitter, so that the diaphragm will not be damaged.

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

■

Humid or wet environment

■

Potentially explosive environments, ammable atmospheres

Store the submersible pressure transmitter in its original packaging in a location that fulls the conditions listed above.

If the original packaging is not available, pack and store the instrument as described below:

1. Wrap the instrument in an antistatic plastic lm.

2. Place the instrument along with shock-absorbent material in the packaging.

3. If stored for a prolonged period of time (more than 30 days), place a bag containing a desiccant inside the packaging.

WARNING!

Before storing the instrument (following operation), remove any residual media.This is of particular

importance if the medium is hazardous to health, e.g. caustic, toxic, carcinogenic, radioactive, etc.

5. Transport, packaging and storage

Autres manuels pour ls-10

Table des matières

Langues :

Autres manuels WIKA Émetteur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur

WIKA ls-10 Manuel utilisateur

Manuels Émetteur populaires d'autres marques