WiebeTech I Manuel utilisateur
SilverSATA I Internal User Manual - 1 -
SilverSATA I Internal™
USER’S MANUAL
Revised May 4, 2007
Features
•Swappable tray in a standard 5 1/4" internally mountable bay
(same size as most CD-ROM drives). A spare internal SATA
port is required.
•Hot-swappable tray allows you to switch drives without shutting
down the system. (Assuming your computer’s internal SATA
host supports this feature.)
•Tray is compatible with other products in the SilverSATA series.
Use the SilverSATA I Internal to easily access one of the
mirrored drives from a Silver SATA II SR in RAID 1 mode.
•Durable, aluminum alloy case offers excellent heat dissipation.
•Integrated fan ensures the hard drive stays cool.
Installation Instructions
1. Check the accessories with your SilverSATA I Internal. Please contact WiebeTech if any parts
are missing or damaged. The box should contain the following items:
Accessories Quantity
SilverSATA Tray 1
18” SATA Cable 1
2. Take a moment to familiarize yourself with the parts of the SilverSATA I Internal. This will help
you to better understand the remaining instructions.
Fr
ont View Rear View
Key lock LED light indicating
data transfer
Power on Drive
failure
Molex power connection
SATA connection Cooling fan
WiebeTech LLC
SilverSATA I Internal User Manual - 2 -
3. Install your hard drive into the tray. Unlock the tray by using the plastic key. Slide the tray out of
the outer casing. Remove the plastic spacer. Lay the drive into the frame of the removable tray, making
sure it lays flat. Align the 4 screw positions then use the included screws (#6-32) to secure the drive into
position.
4. Insert the tray into the SilverSATA I unit. Gently push the tray along the sliding track into the hard
drive compartment and then close the tray, as shown below.
5.Mount SilverSATA I Internal in your computer. In an open 5 ¼” bay in your computer, install
SilverSATA I Internal just as you would a CD/DVD ROM.
6.Plug in the data cable. The SilverSATA I Internal connects to your
computer through SATA. One end of the cable connects to the back of
the unit. Insert the other end into an available port on your computer’s motherboard or add-in card.
7. Plug in the power. Take an unused Molex 4-wire power connector
from inside your computer and plug that into the back of SilverSATA I
Internal. If your drive is already formatted, you can begin using the unit
right away. New hard drives will need to be formatted before they can
be used.
WiebeTech LLC
SilverSATA I Internal User Manual - 3 -
Usage with Windows computers
Compatibility
The SilverSATA I Internal is fully plug-and-play with Windows 2000, XP, Server 2003, and Vista. No
additional drivers are needed. However, the SATA host you are plugging into will probably require driver
or firmware installation.
Formatting Volumes
Before you can use a brand new hard drive in your SilverSATA I Internal, you must first format the drive
into a volume. Use Disk Management, which you can find by right-clicking on My Computer then
selecting Manage. Select NTFS for the format type. If you wish to format FAT-32 for cross-platform
compatibility, you will need to use a third-party utility to do so. Windows XP will not create FAT-32
volumes larger than 32GB.
After the volume is formatted, an icon representing the drive volume will appear in My Computer. You
can now use the volume just like an internal hard drive.
Ejecting Volumes
Unlike detachable storage devices that connect via FireWire or USB, devices connected via SATA cannot
usually be ejected. It is possible to disable the device using Device Manager. Whether or not you
choose to disable the device in this way, always make sure the drive is not being accessed before
removing it. If a drive is removed in the middle of a data input/output process, data loss may result.
WiebeTech LLC
SilverSATA I Internal User Manual - 4 -
Technical Specifications
Product name/code: SilverSATA I Internal
Host Interfaces: SATA
Data Interface Speeds: SATA 3.0GHz (up to 300MB/sec)
Hardware Requirements: •Empty 5 ¼” bay in a Windows or Linux-based PC
•internal power and SATA ports
Drive Types Supported: 3.5” SATA (Serial-ATA) hard drives up to 750GB+
Hot-Swap Capable: Yes, if internal SATA host permits
Operating Temperature: 50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity: 5% to 95%, noncondensing
Cooling Fan: 1 x 4 cm Fan
Certification: CE/FCC
External Material: Made of tough, durable aluminum
Shipping Weights: 2.2 pounds, sans drive
3.2 pounds, with drive
Dimensions: (149mm W x 194mm L x 42mm H)
Warranty: 1-year limited warranty. See warranty statement for details and
limitations. WiebeTech offers free phone support for 90 days after
SilverSATA is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that your unit is plugged into a grounded electrical outlet.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact [email protected] for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact [email protected]. We
appreciate being able to serve you!
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels WiebeTech Stockage
WiebeTech
WiebeTech RTX400-UR Manuel utilisateur
WiebeTech
WiebeTech ProSATA SS8 Manuel utilisateur
WiebeTech
WiebeTech RT5E Instructions d'installation et d'utilisation
WiebeTech
WiebeTech QBD4 Manuel utilisateur
WiebeTech
WiebeTech ToughTech mini Manuel utilisateur
WiebeTech
WiebeTech RTX220-QJp Manuel utilisateur
WiebeTech
WiebeTech FWDD Manuel utilisateur
WiebeTech
WiebeTech RTX400-SV Manuel utilisateur
WiebeTech
WiebeTech RTX100-SJ Manuel utilisateur
WiebeTech
WiebeTech SIS2-SJ Manuel utilisateur
WiebeTech
WiebeTech FODDP Manuel utilisateur
WiebeTech
WiebeTech TDK Manuel utilisateur
WiebeTech
WiebeTech RTX200H-QJ Manuel utilisateur
WiebeTech
WiebeTech TDKEX2 Manuel utilisateur
WiebeTech
WiebeTech SIS5-UR Manuel utilisateur
WiebeTech
WiebeTech FCD Manuel utilisateur
WiebeTech
WiebeTech ToughTech FS Mini 500GB Manuel utilisateur
WiebeTech
WiebeTech RTX400-UR Manuel utilisateur
WiebeTech
WiebeTech Forensic FRTX400H-QJ Manuel utilisateur
WiebeTech
WiebeTech RTX400-SJ Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur