WiebeTech G5JE Manuel utilisateur

User’s Manual for G5Jam Express - 1 -

G5Jam Express™

USER’S MANUAL

Revised September 26, 2006

Features

•Compatibility – G5Jam Express is the only G5Jam

product compatible with the new dual-core G5 Power

Macs.

•Expands your storage options – G5Jam Express

allows you to add two more drives inside your dual-core

G5, for a total of four drives inside. Video editors and

photographers will use G5Jam Express to RAID their new

drives in software for stunning mountable volume sizes

and read/write speeds (over 220MB/s!)

•Easy to install – It only takes minutes to install G5Jam

Express into a dual-core G5.

•Cool design – There's a lot of air flow in the dual-core

G5s, but we still all worry about heat - especially with

hard drives. G5Jam Express takes advantage of the

excellent airflow inside the dual-core G5. With the G5Jam

Express, there's plenty of cooling space for air circulation

between the new drives, and heat dissipates through the

mounting plate.

Installation Instructions

1.Check the accessories with your G5Jam Express. Please contact WiebeTech if any items are missing or

damaged. The box should contain:

Metal base plate and L-bracket 1

Side boards 2

SATA data cables 2

Y-splitter for SATA power 1

Y-splitter for standard ATX power 1

ATX (Molex) extension cable 1

Tie wraps and tie down brackets 3

Screws (6/32 x ¼) 19

Manual and Warranty information (on CD)

Hard disk drives may be purchased with the G5Jam or may be purchased separately. For best performance,

matching drives are recommended. Using drives with different brands and/or capacities will result in a loss of

performance and total RAID volume capacity.

WiebeTech LLC

2. Attach the side boards to the metal base plate, as shown. You will use 6 screws for this step. Note: Both

side boards must have the logo side facing the same direction.

3. Place the hard drives between the side boards and secure them

in place with screws. You will need 6 screws for each drive. The driver

interface connectors should be facing up. The labels on the hard drives

should face toward the front of the G5Jam Express. There will be an open

space between the two drives to aid in heat dissipation.

4. Turn the computer off and remove the side case cover along with the clear plastic baffle. To release the

side case cover, pull the lever on the back of the computer case.

User’s Manual for G5Jam Express - 2 -

WiebeTech LLC

5. If you have not already installed an expansion card with internal SATA ports, you should do so now. The

following general steps will work for most cards. Instructions for individual cards may vary, so consult

your host card’s user manual.

a) Make sure the computer is powered down. Unplug it from the

electrical outlet.

b) Remove the retaining screw and blank slot cover for the expansion

slot you wish to use. You may use any available slot.

c) Insert the expansion card into the slot. Do not force it, but it will take

firm pressure to insert it. It may help to rock the card gently back and

forth while pushing into place.

d) Make sure the card is fully seated in the slot. Use the retaining screw to secure the card in place.

e) After you finish installing the G5Jam Express, you will likely need to install drivers for the card.

See the card’s user manual for instructions. Drivers for cards purchased from WiebeTech can be

found on the same CD as this manual.

Note: Dual-core G5s use PCI Express (PCI-e) expansion slots, while single-core Power Macs use PCI or PCI-X.

These slot types are incompatible, so make sure your card is the correct type for your system.

6. Connect the SATA data cables. One end connects to the host card. Connect the

other end to the hard drive mounted in the G5Jam Express.

User’s Manual for G5Jam Express - 3 -

WiebeTech LLC

7. Choose your method of connecting power to the drives. There are two options:

A. If your original internal drives have both a SATA power connector and a legacy ATX power connector, the

ATX connector should be free. You can use the ATX power extension cable to route power from this connector to

your drives. Plug one end of the cable into the ATX power connector on the original internal drive. Attach the

SATA power Y-splitter to the other end. Connect each SATA power connector from the Y-splitter to the drives

mounted in the G5Jam Express. The other Y-splitter cable is not needed for this installation method.

User’s Manual for G5Jam Express - 4 -

SATA

power ATX

power

B. You may choose to get power from the ATX power cable connected to the optical drive (CD-ROM, DVD-

ROM, etc.). Unplug the power cable from the back of the optical drive. To do this, you may need to release and

partially remove the optical drive. Plug that power cable into the center connector of the ATX power Y-splitter.

One end of the ATX Y-splitter plugs into the optical drive. Route the other end behind the metal “shelf” that the

optical drive rests on. That end, now hanging in the compartment beneath the optical drive, plugs into the center

connector of the SATA power Y-splitter. Connect each SATA power connector from the Y-splitter to the drives

mounted in the G5Jam Express. The ATX extension cable is not needed for this installation method.

Release these levers to move the optical drive.

Cable used

WiebeTech LLC

8. Remove the fan assembly. It simply slides straight out.

9. Remove the screw at the bottom of the case, previously covered by the fan assembly. This screw will be

used to secure the G5Jam Express in place.

Note: in non-dual-core G5s, the screw may be in a different position, and cannot be used to secure the G5Jam

Express.

10. Slide the G5Jam Express into the front compartment of the G5. The L-bracket at the bottom front of the

G5Jam Express should hook over the front of the case bottom. When properly positioned, the G5Jam Express base

plate should line up with the screw hole at the case bottom. Insert the screw and tighten it to secure the G5Jam

Express in place.

View from underneath

The front of the L-bracket hooks over the lip of the case bottom

User’s Manual for G5Jam Express - 5 -

WiebeTech LLC

11. Slide the fan assembly back into place. Put the clear plastic baffle and side case cover back into place,

taking care that all cables are routed out of the way. If the cables are not routed properly, you will have difficulty re-

installing the clear plastic baffle. Tie wraps are included in case you wish to secure the cables in position.

User’s Manual for G5Jam Express - 6 -

The fan clip holds the fan

assembly in place

The hardware installation is finished! No one will ever know the speed and storage you have harnessed inside your

G5. They will only wonder why theirs can’t do what yours does – unless they have a G5Jam too!

Using your new drives

Formatting your drives

If the new internal hard drives are already formatted, an icon representing each volume will appear (mount) on the

desktop. You can begin using the volume(s) right away. If the drive is unformatted, a message will appear on the

desktop saying that the disk is unreadable. You can use OS X’s Disk Utility to easily format the drive.

Creating a RAID with your drives

If you wish to combine your new drives into a RAID, you may do so easily using OS X’s Disk Utility or a 3rd party utility

such as SoftRAID. Common software RAID varieties are RAID level 0 and RAID level 1. Consider which RAID

type best suits your specific needs.

RAID 0 Also called “striping”, this RAID type splits your data between the drives, offering faster

performance and allowing you to use the full, combined capacity of the drives in a

single volume. There is no data redundancy in this RAID type, so in the event of a

hard drive failure all data is lost.

RAID 1 This RAID type “mirrors” two or more drives for best data protection. In this mode, you

will work with a single volume equal in size to the capacity of one drive. When you

copy data to the volume, the data is simultaneously written to all the drives in the

RAID. If one drive were to fail, your data would still be preserved on the other drive(s).

Booting from your G5Jam Express

This feature depends upon the SATA host adapter used. The SATA host must support booting. To activate this

feature, go to System Preferences ÆStartup Disk. A window will list the available volumes (drives). Select the

volume from which you wish to boot. Another method is to hold down the Option key during boot up. A screen

should appear that allows you to select the volume you wish to use. This is useful if you wish to boot from your

G5Jam Express only some of the time.

Note: Most customers prefer to keep their boot drive separate from their RAID, especially a RAID 0. Because of the

lack of data redundancy, a RAID 0 is best used as a work space rather than permanent storage.

WiebeTech LLC

User’s Manual for G5Jam Express - 7 -

Technical Specifications

Product Code G5JE

Interface Serial ATA (SATA)

Power Supply Runs off G5’s supply

Drive Compatibility Serial ATA (SATA) drives

Operating System Mac OS X

RAID Capability Supports software RAID created by Disk Utility or 3rd party utilities

Transfer Rates Up to 200+ MB/s when soft RAIDed under OS X

Shipping Weight 3 pounds sans drives

Warranty 1-year limited warranty. See warranty statement for details and limitations.

WiebeTech offers free phone support for 90 days after purchase (1-866-744-8722).

After 90 days, email support is available at [email protected].

G5Jam Express is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.

If you have any questions or problems, please contact [email protected] for technical support. If you are

interested in purchasing more WiebeTech products, check our website or contact [email protected]. We

appreciate being able to serve you!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WiebeTech Stockage

WiebeTech

WiebeTech SIS4-SJ Manuel utilisateur

WiebeTech

WiebeTech ProSATA SS8 Manuel utilisateur

WiebeTech

WiebeTech SDGB Manuel utilisateur

WiebeTech

WiebeTech RTX200H-QJ Manuel utilisateur

WiebeTech

WiebeTech SIS 1 Manuel utilisateur

WiebeTech

WiebeTech RTX400H-QJ Manuel utilisateur

WiebeTech

WiebeTech QBD4 Manuel utilisateur

WiebeTech

WiebeTech SIS5-SJ Manuel utilisateur

WiebeTech

WiebeTech RF Manuel utilisateur

WiebeTech

WiebeTech RT5E Instructions d'installation et d'utilisation

WiebeTech

WiebeTech RTX400-UR Manuel utilisateur

WiebeTech

WiebeTech ProSATA SS8 Manuel utilisateur

WiebeTech

WiebeTech Forensic ComboDock FCDv6 Manuel utilisateur

WiebeTech

WiebeTech RT5 Manuel utilisateur

WiebeTech

WiebeTech FODDP Manuel utilisateur

WiebeTech

WiebeTech RTX400-SJ Manuel utilisateur

WiebeTech

WiebeTech FCD Manuel utilisateur

WiebeTech

WiebeTech FW8 Manuel utilisateur

WiebeTech

WiebeTech FOD Manuel utilisateur

WiebeTech

WiebeTech RTX400-SV Manuel utilisateur

WiebeTech

WiebeTech Forensic FRTX400H-QJ Manuel utilisateur

WiebeTech

WiebeTech CGB Manuel utilisateur

WiebeTech

WiebeTech RTX200H-SJ Manuel utilisateur

WiebeTech

WiebeTech RT5 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur