WiebeTech DGB Manuel utilisateur

D e sk t op G B U se r M a n ua l - 1 -

DesktopGB

User's Manual

RevisedJuly3,2007

This user's manual is written to assist users in preparing the product when it is first received and to install

the product to the host computer. The manufacturer reserves the right to make improvements to the

product and to revise the document associated with it at anytime without notice.

System Requirements:

•Windows 98 or later (USB)

•Windows 98 SE or later (FW)

•Windows Me

•Windows 2000

•MAC OS 8.6 or later

•One USB port or One FW port

Parts of the DesktopGB:

1. Po

wer Switch

2. Power Connector

3. 40-pin IDE cable

4. Adapter connector

5. FireWire ports

6. USB port

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 2 -

Hardware Preparation

1. Open the cover

2. Loosen the screw on the PC board

3. Open the bottom case, then tighten up the bottom screw to the desire

device, e.g. Hard Disk, MO or Zip disk (now we use MO for example)

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 3 -

4. Store the device back to the case, tighten the screws

5. Secure the metal cap

6. Close the top case

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 4 -

Windows Driver Installation

Installing USB driver (Windows 98 / Windows 98 SE)

1. Boot up computer to Windows 98, Windows 98 SE.

2. Insert the software driver CD into your CD-ROM drive.

3. Wait for the pop-up menu to come out. If the pop-up menu doesn't come out automatically,

please execute the Autorun.exe file manually in the software driver CD from "My computer" icon

then CD ROM drive icon.

4. Click "Install Software Driver" Label on the pop-up menu.

5. Follow the instructions to complete the Setup program and restart the computer.

6. Connect USB Hard Disk to computer; make sure all the cables are well connected.

Installation of drivers is unnecessary for USB usage in Windows ME/2000 or for FireWire usage.

Mac OS Driver Installation:

Installing USB driver (MAC OS 8.6, MAC OS 9.X)

1. Insert the enclosed installation CD into the CD-ROM drive.

2. Open the MAC folder in software CD to find installer.

3. Double click on the installer of "Install ISD Storage Driver" to install the drivers.

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 5 -

4. Connect the Mobile Disk to computer and insert the external DC power supply

5. The system will recognized as a Removable Disk icon in "MY COMPUTER".

Install for FireWire (MAC OS 8.6, OS 9.X)

1. Place the software CD that comes with FireWire HDD in the CD-ROM drive

2. Open the MAC folder in software CD to find "Storage" installer

3. Double click on the "Storage" installer to install the drivers

4. Follow on-screen instruction to complete installation

Click "Continue"

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 6 -

Click "Install"

6. Follow the instructions to complete the Setup program and restart the computer.

7. Connect the FireWire cable (included) to any FireWire port on your MAC and the other end of

FireWire cable to the FireWire HDD

8. The FireWire HDD will be recognized as an "UNTITLED" drive icon on screen

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 7 -

!!!!! Important notice for Windows 98 & Windows ME users!!!!!!

The drivers are now loaded. If the hard drive in USB Hard Disk is unformatted, you must now partition

and format it. This is done through the use of the DOS utility FDISK. See your Windows documentation if

you are unfamiliar with FDISK. Note that you must run FDISK before you try to format the hard drive and

that you must run FDISK in a DOS Window while Windows is running.

!!!!!!!!!!!!!!!!! Important notice for Windows 2000 users!!!!!!!!!!!!!!!!!!

Windows 2000 does not have Windows utility FDISK, therefore the Hard Disk must be partitioned and

formatted in Windows 98. This is done through the use of the Windows utility FDISK. See your Windows

documentation if you are unfamiliar with FDISK. Note that you must run FDISK before you try formatting

the hard drive and that you must run FDISK in the DOS Window while Windows is running.

!!!!!!!!!!!!!!!!! Important notice for Mac users!!!!!!!!!!!!!!!!!!

Always drag and drop the USB Hard Disk "Untitled" icon into trash can before detaching the USB Hard

Disk from the USB port on your Mac computer. The drivers are now loaded. If the hard drive in USB Hard

Disk is unformatted, you must now format it following the instruction below:

(1) Highlight the icon for USB Hard Disk.

(2) From the Finder menu located at the top of the screen, select Special, Erase Disk.

You can select either DOS or Macintosh formatting. If you intend to use the device on both a PC and a

Mac, select DOS formatting.

To be safe, always drag and drop the "Untitled" drive icon into trash can before you remove the Flash

Card from the reader or unplug the hard disk from USB port.

WiebeTech LLC

D e sk t op G B U se r M a n ua l - 8 -

One Year Warranty Statement

Manufacturer warrants its products to be free from defects in material and workmanship under the

following terms:

•The effective period of this warranty is ONE year for parts and labor from the date of customer

purchase.

•The manufacturer is responsible only to repair or replace any defective hardware component part

of such products.

•The buyer is obliged to pay shipping cost of sending defective products to the manufacturer.

The warranty will not apply when

•Any product, on which the serial number has been defaced, modified or removed.

•Malfunction damage, deterioration resulting from accident, misuse, neglect, fire, water, or other

act of nature, unauthorized product modification or failure to follow instructions supplied with the

products.

•Damage or other loss in any shipment.

Attention

1. It must use external power

2. It just uses one interface type at a time

Strongly Recommended

When using Windows 98/98 SE, Windows ME, Windows 2000, MAC OS 8.6, or MAC OS 9.XX, you must

install the driver before connecting this product to the computer.

FCC Compliance Statement

This equipment has been tested and found to comply with limits for a Class B digital device, Pursuant to

Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in residential

installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions may caused harmful interference to radio communications.

However, there is no guarantee that interference will no occur in a particular installation. If this equipment

does cause interference to radio or television equipment reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

•Reorient or relocated the receiving antenna.

•Move the equipment away from the receiver.

•Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/television technician for additional suggestions.

Only equipment certified to comply with Class B should be attached to this equipment to continuing

compliant with FCC emission limit, and must have shielded interface cables. You are cautioned that may

change or modifications to the equipment not expressly approved by the party responsible for compliance

could void your authority to operate such equipment.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WiebeTech Stockage

WiebeTech

WiebeTech RTX200H-QJ Manuel utilisateur

WiebeTech

WiebeTech Forensic FRTX400H-QJ Manuel utilisateur

WiebeTech

WiebeTech RTX200H-SJ Manuel utilisateur

WiebeTech

WiebeTech MG8 Manuel utilisateur

WiebeTech

WiebeTech CDK Manuel utilisateur

WiebeTech

WiebeTech SDGB Manuel utilisateur

WiebeTech

WiebeTech G5JE Manuel utilisateur

WiebeTech

WiebeTech RTX400-UR Manuel utilisateur

WiebeTech

WiebeTech SIS5-UR Manuel utilisateur

WiebeTech

WiebeTech RTX400-IR Manuel utilisateur

WiebeTech

WiebeTech Forensic UltraDock FUDv6 Manuel utilisateur

WiebeTech

WiebeTech ProSATA SS8 Manuel utilisateur

WiebeTech

WiebeTech RTX400-SJ Manuel utilisateur

WiebeTech

WiebeTech RT5E Instructions d'installation et d'utilisation

WiebeTech

WiebeTech RTX100-Q Manuel utilisateur

WiebeTech

WiebeTech DU8-0 Manuel utilisateur

WiebeTech

WiebeTech QBD4 Manuel utilisateur

WiebeTech

WiebeTech FODDP Manuel utilisateur

WiebeTech

WiebeTech ProSATA SS8 Manuel utilisateur

WiebeTech

WiebeTech RTX400-NJ Manuel utilisateur

WiebeTech

WiebeTech SIS2-FH Manuel utilisateur

WiebeTech

WiebeTech TDK Manuel utilisateur

WiebeTech

WiebeTech MGB Manuel utilisateur

WiebeTech

WiebeTech ToughTech FS Mini 500GB Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur