Wali MF003 Manuel utilisateur

MF003

WARNING

！

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.

SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.

Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly or inappropriate use.

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

Triple Monitor Desk Mount

75x75\100x100

INSTALLATION MANUAL

1-844-SATTLER (18447288537)

[email protected]

www.walielectric.com

(10kg/22lbs)x3

RATED

MAX 27”

TIPOVER WARNING

● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.

● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.

Supplied Parts List

VESA Plate

d (x3)

Nut

h (x3)

M5x14 Bolt

e (x3)

Support Plate

j (x1)

Spring Washer

l (x1)

M10 Washer

k (x1)

M10 Bolt

i (x1)

Grommet Base Plate

m (x1)

Wire Clip

n1 (x2)

Wire Clip

n2 (x4) M4 Spacer

s (x12)

M4x30 Bolt

r (x12)

Wrench

p (x1)

M4x12 Bolt

q (x12)

Monitor Arm

c2 (x1)

Lower Pole

a (x1)

Allen Key

o (x1)

Weighted Base

b (x1)

Install the Pole a to the weighted Base b using 3pcs M5x14 Bolts e , and tighten with the Allen key 3mm o .

This step is depending on your personal preference

To provide stability for a heavier monitor, we may recommend install the mount to the hole in your desk.

a1 b

0.4‘’-3’’

b: Self-drilled Hole Installation

Option A: Free Standing Installation (Using V-vase)

a: Existing Grommet Hole Installation

ø 10m

0.4‘’-3”

(ø ")3/8

√

Swivel Arm

c1 (x1)

0.4‘’-3’’

a: Existing Grommet Hole Installation

Place Pole a onto Grommet Base Plate m .

Connect them from the bottom using M5x14

Bolt e and tighten with Allen Key 3mm .

a1 m

b:Self-drilled Grommet Hole Installation

ø 10mm

(ø ")3/8

Option B: Grommet Base Installation (For saving more space)

0.4‘’-3’’

Notice: Please make sure the security nut is installed before you rotate the monitor.

5If one monitor is lower, remove the Nut h and turn the bolt counter-clockwise using

Allen key 3mm o to raise the monitor. Tighten the VESA Plate e with Nut h for stability

after the adjustment.

4Put the assembled TV/Monitor onto the Arms & and tighten the VESA Plate e with

Nut h for stability.

Select bolts and spacers (if needed) according to your TV/Monitor. Attach the VESA Plate to the Monitor and tighten with a screwdriver. (Screwdriver not included)

7For safety, please do not extend the arms too far forward or backward. This may cause

instability and tip over.

6Guide the cable through the Wire Clips ( n1, n2 ) and store the Allen Keys o in the Wire Clip n1 .

Adjust the tilt angle using Allen Key 5mm n .

n1 n1

on2

Step 3.1

Select Monitor Screws

90°

15°

Step 3.3a

Flat Back Monitor

Step 3.3b

Curved or Recessed Back Monitor

c1 c2 d

M4x12 M4x30

Ignore this step if monitors are level.

Only one screw size fits your Monitor

Step 3.2

Select Spacers ( if needed )

Hand thread screws into the

threaded inserts on the back

of your Monitor to determine

which screw (M4x12 or M4x30)

to use.

n1 o

Note: Please make sure two arms are aligned and balanced.

2Put the Wire Clip n1 and Arms & through the Poles , adjust the preferred height

and tighten using Allen Key 6mm o . Attach the Wire Clips n1 to the Swivel Arm d .

c1 c2

n1 a

Autres manuels Wali Support et étagère

Wali

Wali CS202 Manuel utilisateur

Wali

Wali M003S Manuel utilisateur

Wali

Wali M002XLS Manuel utilisateur

Wali

Wali STT001D-B Manuel utilisateur

Wali

Wali TVS001 Manuel utilisateur

Wali

Wali MF002XLS Manuel utilisateur

Wali

Wali GSDM003S Manuel utilisateur

Wali

Wali M002LM Manuel utilisateur

Wali

Wali MATI001-G Manuel utilisateur

Wali

Wali GSWM002 Manuel utilisateur

Wali

Wali MATI002-G Manuel utilisateur

Wali

Wali GSDM002-P Manuel utilisateur

Wali

Wali 2655LO Manuel utilisateur

Wali

Wali MF002LM Manuel utilisateur

Wali

Wali TVDVD-01 Manuel utilisateur

Wali

Wali M003 Manuel utilisateur

Wali

Wali PTT007T-B Manuel utilisateur

Wali

Wali GSDM002 Manuel utilisateur

Wali

Wali 1742LM Manuel utilisateur

Wali

Wali M002-W Manuel utilisateur

Wali

Wali 1339LM-W Manuel utilisateur

Wali

Wali GSM001XL Manuel utilisateur

Wali

Wali TVS001-W Manuel utilisateur

Wali

Wali M001S-W Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur