VIA Technologies EPIA-M Mini-ITX Manuel utilisateur

Version 1.3

January 23, 2003

VIA

User’s Manual

VIA EPIA-M

Mini-ITX Mainboard

may be reproduced or transmitted in any form without express written

authorization from VIA.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. VIA will not be responsible for any loss of data

resulting from the use, disuse or misuse of this or any other VIA product.

No Warranty

VIA has made every effort to ensure the accuracy of the content of

this manual. However, it is possible that it may contain technical

inaccuracies or typographical or other errors. VIA will assume no liability

for any inaccuracy found in this publication, nor for damages, direct,

indirect, incidental, consequential or otherwise, that may result from

such an inaccuracy, including without limitation loss of data or profits.

VIA provides this manual “as is”, and does not issue a warranty of any

kind, express or implied, including without limitation implied warranties

of merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without

notice. VIA reserves the right to alter product designs, layouts or drivers

without notification.

iii

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party re-

sponsible for compliance could void the user’s authority to operate the

equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in

order to comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

VIA EPIA-M Mini-ITX Mainboard

Tested to comply

with FCC Standard

For Home or Office Use

We take every care in the preparation of this document, but no guaran-

tee is given as to the correctness of its contents. Our products are

under continual improvement and we reserve the right to make changes

without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/98SE/ME/2000/NT and Windows XP are registered

trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence pro-

tects the equipment from overheating. DO NOT COVER THE OPEN-

INGS.

6. Make sure the voltage of the power source and adjust properly 110/

220V before connecting the equipment to the power inlet.

7. Place the power cord in such a way that people cannot step on it.

Do not place anything over the power cord.

8. Always unplug the power cord before inserting any add-on card or

module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Liquid can cause damage

or electrical shock.

11. If any of the following situations arises, get the equipment checked

by a service personnel:

•The power cord or plug is damaged

•Liquid has penetrated into the equipment

•The equipment has been exposed to moisture

•The equipment has not work well or you can not get it work

according to User’s Manual.

•The equipment has dropped and damaged

•If the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCON-

DITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Explosion or serious damage may occur if the

battery is incorrectly replaced. Replace only with the same

or equivalent type recommended by the manufacturer.

This VIA EPIA-M Mini-ITX Mainboard package should contain the follow-

ing items:

• 1 x VIA EPIA-M Mini-ITX Mainboard

• 1 x User’s manual

• 1 x ATA-33/66/100 Hard drive ribbon cable

• 1 x Floppy ribbon cable

• 1 x Combo Module (2 port USB 2.0 and 2 port IEEE1394)

• 1 x Driver Utilities CD

Box Contents

Contents

Specifications ......................................................... 1-1

Mainboard Specifications................................................ 1-2

Mainboard Layout............................................................ 1-4

Connectors Guide ............................................................ 1-5

Installation ............................................................. 2-1

CPU ................................................................................. 2-2

The VIA C3™ E-Series Processor ................................... 2-2

The VIA Eden Processor .................................................. 2-3

Memory Installation ......................................................... 2-4

DDR SDRAM Module Installation Procedures ................. 2-4

Available DDR SDRAM Configurations ........................... 2-5

Power Supply .................................................................. 2-6

ATX 20-Pin Power Connector: ATXPWR ....................... 2-6

Back Panel ....................................................................... 2-7

Mouse Connector: JMS1 .................................................. 2-7

Keyboard Connector: JKB1 .............................................. 2-7

USB Port Connectors ....................................................... 2-8

RJ-45 NIC Port ................................................................. 2-8

Parallel Port Connector: LPT1 ......................................... 2-8

Serial Port Connector: COM 1 .......................................... 2-9

S-Video Port ..................................................................... 2-9

Audio Port Connectors ..................................................... 2-9

RCA or S/PDIF Port......................................................... 2-9

VGA Out ........................................................................... 2-9

Connectors ..................................................................... 2-10

Hard Disk Connectors: IDE1 & IDE2 ............................ 2-10

Case Connectors: F_PANEL ........................................... 2-11

Fast IrDA Infrared Module Connector: FIR .................... 2-12

CIR/PS2 (EXT_KBMS) Header: CIR ............................ 2-12

USB pin-header: USB3/4 ................................................ 2-13

Wake-On LAN Connector: WOL ................................... 2-13

FireWire: IEEE1394 ........................................................ 2-14

vii

COM2: The Second Serial Port ...................................... 2-14

Chassis Intrusion Connector: CI...................................... 2-15

CD-In Connector: CD_IN ............................................... 2-16

I2C Connector: I2C .......................................................... 2-16

Front Audio Connector: F_Audio .................................... 2-17

LVDS Module Connector: LVDS (Optional) ................... 2-17

Jumpers.......................................................................... 2-18

Clear CMOS Jumper: CLEAR_CMOS ........................... 2-18

RCA Video or S/PDIF Select: SPDIF_SEL .................... 2-18

Slots............................................................................... 2-19

PCI Slots ......................................................................... 2-19

PCI Interrupt Request Routing ....................................... 2-19

BIOS Setup............................................................ 3-1

Entering Setup.................................................................. 3-2

Control Keys.................................................................... 3-2

Getting Help .................................................................... 3-3

The Main Menu................................................................ 3-4

Standard CMOS Features ................................................ 3-6

Advanced BIOS Features ................................................ 3-8

Advanced Chipset Features ........................................... 3-11

Integrated Peripherals .................................................... 3-13

Power Management Setup.............................................. 3-17

PNP/PCI Configurations ................................................ 3-22

PC Health Status ............................................................ 3-24

Frequency/Voltage Control ............................................ 3-25

Load Fail-Safe Defaults................................................. 3-27

Load Optimized Defaults ............................................... 3-28

Set Supervisor/User Password ...................................... 3-29

Save & Exit Setup.......................................................... 3-31

Exit Without Saving ....................................................... 3-32

viii

Software Setup...................................................... 4-1

Driver Utilities CD Content ............................................. 4-2

Getting Started ................................................................. 4-2

Running the Driver Utilities CD ..................................... 4-2

CD Content ...................................................................... 4-2

Appendix ................................................................ 5-1

Smart 5.1 - Intelligent 6 Channel Audio........................... 5-2

Specifications

1-1

The ultra-compact and highly intergrated VIA

EPIA-M Mini-ITX Mainboard is the smallest form

factor mainboard specification available today,

developed by VIA Technologies, Inc as part of the

company’s open industry-wide total connectivity

initiative. The mainboard enables the creation of an

exciting new generation of small, ergonomic, innovative

and affordable embedded systems. Through high level

of integration, mini-ITX only occupy 66% of the size

of FlexATX mainboard form factor. The mainboard

comes with an embedded VIA Processor, boasting ultra

low power consumption and cool, quiet operation.

This chapter includes the following sections:

Mainboard Specifications 1-2

Mainboard Layout 1-4

Connectors Guide 1-5

Specifications

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies KT880 Manuel utilisateur

VIA Technologies

VIA Technologies VT82C686A Manuel utilisateur

VIA Technologies

VIA Technologies VB7009 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M850 Manuel utilisateur

VIA Technologies

VIA Technologies VB8002 Manuel utilisateur

VIA Technologies

VIA Technologies NAS 7800 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P700 Manuel utilisateur

VIA Technologies

VIA Technologies Mini-ITX Mainboard EPIA-MII Manuel utilisateur

VIA Technologies

VIA Technologies KT400A Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-PD Mini-ITX Manuel utilisateur

VIA Technologies

VIA Technologies VT82C694X Pro Manuel utilisateur

VIA Technologies

VIA Technologies G03-NC73-F Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P710 Instructions de montage

VIA Technologies

VIA Technologies EPIA PD-Series Manuel utilisateur

VIA Technologies

VIA Technologies VAB-820 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M920 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M910 Manuel utilisateur

VIA Technologies

VIA Technologies Epia LT15000G Manuel utilisateur

VIA Technologies

VIA Technologies VT8237R Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P830 Manuel utilisateur

VIA Technologies

VIA Technologies VB8001 Manuel utilisateur

VIA Technologies

VIA Technologies EITX-3000 Manuel utilisateur

VIA Technologies

VIA Technologies VX800 Series Manuel utilisateur

VIA Technologies

VIA Technologies NR10000EG - VIA EPIA Nano ITX Motherboard Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur