VIA Technologies VT82C686A Manuel utilisateur

Mainboard User’s Manual

This publication, including all photographs, illustrations and

software, is protected under international copyright laws, with all

rights reserved. Neither this manual, nor any of the material

contained herein, may be reproduced without the express written

consent of the manufacturer.

The information in this document is subject to change without

notice. The manufacturer makes no representations or warranties

with respect to the contents hereof and specifically disclaims any

implied warranties of merchantability or fitness for any particular

purpose. Further, the manufacturer reserves the right to revise this

publication and to make changes from time to time in the content

hereof without obligation of the manufacturer to notify any person

of such revision or changes.

Trademarks

I M, VGA, and PS/2 are registered trademarks of International

usiness Machines.

Intel, Pentium/II/III, and MMX are registered trademarks of Intel

Corporation.

Microsoft, MS-DOS and Windows 95/98/NT/ME/2000 are

registered trademarks of Microsoft Corporation.

PC-cillin and ChipAwayVirus are trademarks of Trend Micro Inc.

Award is a trademark of Award Software Inc.

A3D is a registered trademark of Aureal Inc.

Gamut is a registered trademark of Formosoft International Inc.

SuperVoice is a registered trademark of Pacific Image

Communications Inc.

MediaRing Talk is a registered trademark of MediaRing Inc.

3Deep is a registered trademark of E-Color Inc.

Other names used in this publication may be trademarks and are

acknowledged.

M781+ Series, V3.0

V133X February 2001

Mainboard User’s Manual

 Mainboard User’s Manual
Table of Contents
Trademarks..............................................................................I
Chapter 1: Introduction...................................................................1
Key Features...........................................................................2
Package Contents....................................................................5
Static Electricity Precautions..................................................6
Pre-Installation Inspection......................................................6
Chapter 2: Mainboard Installation..................................................7
Mainboard Components..........................................................8
I/O Ports..................................................................................9
Install A CPU..........................................................................9
Install Memory......................................................................11
Setting Jumper Switches.......................................................12
Install the Mainboard............................................................15
Optional Extension  rackets.................................................17
Install Other Devices............................................................18
Expansion Slots....................................................................20
Chapter 3:  IOS Setup Utility......................................................23
Introduction..........................................................................23
Running the Setup Utility.....................................................24
Standard CMOS Features Page.............................................25
Advanced  IOS Features Page.............................................26
Advanced Chipset Features Page..........................................29
Integrated Peripherals Page...................................................32
Power Management Setup Page............................................35
PnP/PCI Configurations Page...............................................37
Hardware Monitor Page........................................................39
Frequency/Voltage Control Page..........................................40
Load  est Performance Defaults..........................................41
Load Optimized Defaults......................................................41
Set Password.........................................................................41
Save & Exit Setup.................................................................42
Exit Without Saving..............................................................42
Chapter 4: Software & Applications.............................................43
Introduction..........................................................................43
Installing Support Software..................................................43
Auto-installing under Windows 98/ME/2000.......................45
III

Mainboard User’s Manual

Appendix A: Corel WordPerfect Suite 8 .................................A1

Welcome to Corel WordPerfect Suite 8 ..............................A2

Installing Corel WordPerfect Suite 8 ..................................A6

Learning how to use Corel WordPerfect Suite 8 .................A9

Support and Services .........................................................A13

Appendix B: Gamut2000 .......................................................... 1

1. GAMUT2000 Family ...................................................... 2

1.1 LifeAmp - Versatile Audio Playback System ............ 2

1.2 AudioPort - Audio Transportation System ................ 4

2. Installation ....................................................................... 5

2.1 efore eginning: System Requirements .................. 5

2.2 Uninstalling the Previous of GAMUT2000................ 5

3. Main Console .................................................................. 7

3.1 Introduction ............................................................... 7

3.2 Function and Operation ............................................. 7

3.3 Main Menu ................................................................ 9

1: Introduction

Chapter 1

Introduction

This mainboard has a Socket-370 processor socket for an Intel

PPGA FCPGA Celeron or FCPGA Pentium III processor. You

can install any one of these processors on the mainboard. The

mainboard supports front-side bus speeds of 66MHz, 100MHz or

133MHz.

This mainboard uses the VIA PM133 Pro Savage chipset which

provides CPU Plug & Play through firmware and Ultra DMA

33/66/100 (VT82C686 chip only) function. A 4X AGP slot for

highly graphics display, and integrates a S3 Savage4 Pro

2D 3D Video Accelerator. The mainboard has a built-in AC97

Codec, provides an AMR (Audio Modem Riser) slot to support

Audio and Modem application. In addition, the mainboard has an

extended set of ATX I O Ports including PS/2 keyboard and

mouse ports, two US ports, a parallel port, a VGA port, a serial

port, a game port and audio ports.

This mainboard has all the features you need to develop a powerful

multimedia workstation. The board is Micro ATX size and has

power connectors for an ATX power supply.

Mainboard User’s Manual

Key Features

The key features of this mainboard include:

Socket-370 Processor Support

Supports PPGA FCPGA Celeron CPUs

Supports FCPGA Pentium III CPUs

Supports 66MHz, 100MHz or 133MHz Front-Side us.

All processors are automatically configured using firmware and a

synchronous Host/DRAM Clock Scheme.

Memory Support

Two DIMM slots for 168-pin SDRAM memory modules

Support for 100/133 MHz memory bus

Maximum installed memory is 2 x 512M = 1G .

E pansion Slots

One AMR slot for a special audio/modem riser card

One AGP4X slot for AGP 2.0-compliant interface

Two 32-bit PCI slots for PCI 2.2-compliant bus interface

One 8/16-bit ISA slot.

Onboard IDE channels

Primary and Secondary PCI IDE channels

Support for PIO modes, us Mastering and Ultra DMA

33/66/100 (optional VT82C686 ) modes.

Power Supply and Power Management

ATX power supply connector

ACPI and previous PMU support, suspend switch

Supports Wake on LAN and Wake on Alarm.

1: Introduction

Built-in Graphics System

Onboard Savage4 Pro 128-bit 2D 3D Video Accelerator

2 to 32 M frame buffer use system memory

Supports high resolutions up to 1920x1440 16-bit colors,

S3 DX7 texture compression (S3TC)

Full AGP 4x, full speed hardware DVD Accelerator.

AC97 Codec

Compliant PC97 2.1 specification

Supports 18-bit ADC (Analog Digital Converter) and DAC

(Digital Analog Converter) as well as 18-bit stereo full-

duplex codec.

Onboard I/O Ports

Provides PC99 Color Connectors for easy peripheral device

connections

Floppy disk drive connector with 1Mb/s transfer rate

Two serial ports with 16550-compatible fast UART

One parallel port with ECP and EPP support

Two US ports, optional two US ports module

Two PS/2 ports for keyboard and mouse

One infrared port connector for optional module.

Onboard Flash ROM

Automatic CPU and board configuration support Plug and

Play of peripheral devices and expansion cards

uilt-in hardware monitoring for CPU & System

temperatures, fan speeds and mainboard voltages

uilt-in virus protection using Trend’s ChipAwayVirus

provides boot process virus protection.

Mainboard User’s Manual

Bundled Software

PC-Cillin2000 provides automatic virus protection under

Windows 95/98/NT/2000

Gamut2000 provides professional audio features included

MP3 encoding/playback

3Deep delivers the precise imagery and displays accurate

color in your monitor

Corel WordPerfect Suite 8 is a Microsoft Windows®

office application suite (optional)

WinDVD2000 is a DVD playback application (optional).

Dimensions

ATX form factor (24.4cm x 22cm).

1: Introduction

Package Contents

Attention: This mainboard series includes two different models.

They are M781MR+ (Modem Ready) and M781+ (without

Modem).

Please contact your local supplier for your purchase model.

Each model will support different specification, list as below:

Model Specification

M781MR+ Support an AMR v.90 56K Fax/Modem card

M781+ ---

Your mainboard package ships with the following items:

The mainboard

This User’s Guide

1 UDMA/66 IDE cable

1 Floppy disk drive cable

Support software on CD-ROM disk.

Optional Accessories

You can purchase the following optional accessories for this

mainboard.

Extended US module.

Mainboard User’s Manual

Static Electricity Precautions

Components on this mainboard can be damaged by static

electricity. Take the following precautions when unpacking the

mainboard and installing it in a system.

1. Keep the mainboard and other components in their original

static-proof packaging until you are ready to install them.

2. During installation, wear a grounded wrist strap if possible. If

you don’t have a wrist strap, discharge static electricity by

touching the bare metal of the system chassis.

3. Handle the mainboard carefully by the edges. Avoid touching

the components unless it is absolutely necessary. During

installation put the mainboard on top of the static-protection

packaging it came in with the component side facing up.

Pre-Installation Inspection

1. Inspect the mainboard for damage to the components and

connectors on the board.

2. If you suspect that the mainboard has been damaged, do not

connect power to the system. Contact your mainboard vendor

and report the damage.

Autres manuels pour VT82C686A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies VAB-800 Manuel utilisateur

VIA Technologies

VIA Technologies VB8001 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies P4X266-PE11-L Manuel utilisateur

VIA Technologies

VIA Technologies NR10000EG - VIA EPIA Nano ITX Motherboard Manuel utilisateur

VIA Technologies

VIA Technologies VB7009 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M830 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P700 Manuel utilisateur

VIA Technologies

VIA Technologies A7F129 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-CN13000G - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-SN Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-TC Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P830 Manuel utilisateur

VIA Technologies

VIA Technologies VT8237R Manuel utilisateur

VIA Technologies

VIA Technologies PT-DVBX Manuel utilisateur

VIA Technologies

VIA Technologies EX10000EG - VIA EPIA Motherboard Manuel utilisateur

VIA Technologies

VIA Technologies EPIA LN-Series Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies 10GWG21Q00020 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-CL Manuel utilisateur

VIA Technologies

VIA Technologies VIA P4PB 266E Manuel utilisateur

VIA Technologies

VIA Technologies KM400 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M900 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-630 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur