Velleman Whadda WPM461 Manuel utilisateur

MANUAL

whadda.com

EN CHIP KEY DISPLAY MODULE

WPM461

Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the

device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

For indoor use only.

•This device can be used by children aged from 8 years and above, and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning the use of the device in a safe way and understand

the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall

not be made by children without supervision.

General Guidelines

•Refer to the Velleman®Service and Quality Warranty on the last pages of this manual.

•All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the

device is not covered by the warranty.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

•Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) –

of any nature (financial, physical…) arising from the possession, use or failure of this product.

•Keep this manual for future reference.

What is Arduino®

Arduino®is an open-source prototyping platform based on easy-to-use hardware and software.

Arduino®boards are able to read inputs –light-on sensor, a finger on a button or a Twitter message –

and turn it into an output –activating of a motor, turning on an LED, publishing something online. You

can tell your board what to do by sending a set of instructions to the microcontroller on the board. To

do so, you use the Arduino programming language (based on Wiring) and the Arduino®software IDE

(based on Processing). Additional shields/modules/components are required for reading a twitter

message or publishing online. Surf to www.arduino.cc for more information

Product overview

The Whadda chip key display module features a combination of eight 7-segment displays, eight red

LEDs, and eight push-buttons making it ideally suited for making simple user interfaces.

All of the LEDs and buttons are driven and/or read by a TM1638 LED controller IC. This driver chip

uses a simple 3-wire serial interface to communicate with your Arduino® compatible board.

Specifications:

Driver chip: TM1638 LED controller

Supply voltage: 5 V

Number of LEDs: 8

Number of 7-segment displays: 8 (with decimal point)

Number of pushbuttons: 8

Weight: 28 g

Dimensions (W x L x H): 76.2 x 50.2 x 10.6 mm

Wiring description

Name

Arduino®connection

VCC

Supply voltage (5 V DC)

GND

Ground

GND

STB

Chip selection input

Digital Pin 4

CLK

Clock input

Digital Pin 6

DIO

Serial data input

Digital Pin 7

Example program

You can download the example Arduino® program by going to the official Whadda github page:

https://github.com/WhaddaMakers/TM1638-Chip-key-display-module

1. Click the “Download ZIP” link in the “Code” menu:

2. Unzip the downloaded file, and browse to the WPM461_example folder. Open the example

Arduino® sketch (WPM461_example.ino) located in the folder.

3. Use the Arduino Library manager to install the TM1638plus library, by going to Sketch >

Include Library > Manage Libraries… , typing in TM1638plus in the search bar and clicking

“Install”:

4. Connect your Arduino compatible board, make sure the correct Board and connection port

are set in the tools menu, and hit Upload

The example program will cycle through various display sequences, which includes showing

“Velleman” and “Whadda” on the 7-segment displays, turning on and off all of the red LEDs, showing

a number sequence on the 7-segment display, and displaying the number of milliseconds since last

reset on the display.

Check the comments in the example code for more information on what each function does.

whadda.com

Modifications and typographical errors reserved - © Velleman Group nv. WPM461

Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.

Table des matières

Autres manuels Velleman Unité de contrôle

Velleman

Velleman Velbus VMB4PD Manuel utilisateur

Velleman

Velleman K8008 Manuel utilisateur

Velleman

Velleman Velbus VMB1RY Manuel utilisateur

Velleman

Velleman VM151 Manuel utilisateur

Velleman

Velleman Whadda WPSE477 Manuel utilisateur

Velleman

Velleman WHADDA MMA8452 Manuel utilisateur

Velleman

Velleman VMP502 Manuel utilisateur

Velleman

Velleman VMA402 Manuel utilisateur

Velleman

Velleman Whadda WPM464 Manuel utilisateur

Velleman

Velleman VMA341 Manuel utilisateur

Velleman

Velleman Whadda WPM357 Manuel utilisateur

Velleman

Velleman Velbus VMB1BL Manuel utilisateur

Velleman

Velleman K8006 Manuel utilisateur

Velleman

Velleman VMA345 Manuel utilisateur

Velleman

Velleman VM134 Manuel utilisateur

Velleman

Velleman VMA203 Manuel utilisateur

Velleman

Velleman Whadda WPI304 Manuel utilisateur

Velleman

Velleman K8027 Manuel utilisateur

Velleman

Velleman VMA450 Manuel utilisateur

Velleman

Velleman VMA406 Manuel utilisateur

Velleman

Velleman VM103 Manuel utilisateur

Velleman

Velleman Whadda WPM463 Manuel utilisateur

Velleman

Velleman VMA207 Manuel utilisateur

Velleman

Velleman KA04 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur