Vaxcel T0371 Manuel d'instructions

181010

Lock Nut (E)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Thread two headless screws (D) through the cross bar (A), and then secure them with four lock nuts (E).

Adjust the length of the headless screws (D) if necessary.

Note: Make sure that the headless screws are lined up horizontally to make the fixture level.

Note: With silicone caulking compound, caulk completely around where the back plate meets with the

wall surface to prevent water from seeping into outlet box.

2. Attach the cross bar (A) to the outlet box by using two mounting screws (B).

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (F) as follows:

---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.

---Attach the fixture grounding wire (usually green insulation or bare wire) to the cross bar

(A)

with the green

grounding screw (C), and then connect it to the house grounding wire with the wire connector (F).

Carefully put the wires back into the outlet box.

4. Attach the fixture to the cross bar (A) by inserting headless screws (D) into holes on back plate, and then

secure it with two rubber pads (H) and two ball nuts (G).

Green Grounding Screw (C)

Outlet Box

Wire Connector (F)

Headless

Screw (D)

Cross Bar (A)

Lock Nut

(E)

House Grounding Wire

Fixture Grounding Wire

Fixture Wire

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0368 T0371 T0483 T0487

Mounting Screw (B) Wire Connector (F) Ball Nut (G) Rubber Pad (H)

Cross Bar (A)

Bulb Type A Max.60W

(not included)

Fixture

Hardware Package (included):

Green Grounding

Screw (C)

Turn off the power at fuse or circuit box.

Installation Steps

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

Mounting Screw (B)

Headless

Screw (D)

Holder

Socket

Shade

Socket Ring

Photocell

Back Plate

Ball Nut(G)

Rubber Pad(H)

181010

5. Attach the shade to the socket, and then secure it with the socket ring.

6. Install a bulb (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.

A: 12"

B: 11.5"

C: 18"

The following parts are available for re-order if damaged or missing.

Spare Parts List:

1. Turn off the power at the fuse or circuit box before starting installation.

2. Loosen the wire connectors connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connectors (F): (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Photocell

White Wires From Photocell

Wire

Connector

Wires From Fixture

Wires From

Main Power

Wire Connector (F)

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.1Fig.2

Mounting Screw (B)

Rubber Pad (H)

Cross Bar (A) Green Grounding

Screw (C)

Lock Nut (E)

Wire Connector (F) Ball Nut (G)

Headless Screw (D)

Assembly Kit

5786MM (1 SET) for T0368

5787MM (1 SET) for T0371

5987MM (1 SET) for T0483

5988MM (1 SET) for T0487

Ce manuel convient aux modèles suivants

Autres manuels Vaxcel Éclairage extérieur

Vaxcel

Vaxcel T0694 Manuel d'instructions

Vaxcel

Vaxcel T0451 Manuel d'instructions

Vaxcel

Vaxcel T0442 Manuel d'instructions

Vaxcel

Vaxcel T0040 Manuel d'instructions

Vaxcel

Vaxcel T0701 Manuel d'instructions

Vaxcel

Vaxcel T0551 Manuel d'instructions

Vaxcel

Vaxcel T0142 Manuel d'instructions

Vaxcel

Vaxcel T0364 Manuel d'instructions

Vaxcel

Vaxcel T0246 Manuel d'instructions

Vaxcel

Vaxcel T0461 Manuel d'instructions

Vaxcel

Vaxcel T0454 Manuel d'instructions

Vaxcel

Vaxcel T0521 Manuel d'instructions

Vaxcel

Vaxcel T0258 Manuel d'instructions

Vaxcel

Vaxcel T0476 Manuel d'instructions

Vaxcel

Vaxcel Lambda T0627 Manuel d'instructions

Vaxcel

Vaxcel T0350 Manuel d'instructions

Vaxcel

Vaxcel T0080 Manuel d'instructions

Vaxcel

Vaxcel T0624 Manuel d'instructions

Vaxcel

Vaxcel T0103 Manuel d'instructions

Vaxcel

Vaxcel T0698 Manuel d'instructions

Vaxcel

Vaxcel T0541 Manuel d'instructions

Vaxcel

Vaxcel T0694 Manuel d'instructions

Vaxcel

Vaxcel X0090 Manuel d'instructions

Vaxcel

Vaxcel T0181 Manuel d'instructions

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur