Ubiquiti NanoStation M Manuel utilisateur

High-Power 2x2 MIMO

airMAX®TDMA Station

Models: NSM2/NSM3/NSM365/

NSM5/locoM2/locoM5

Introduction

Thank you for purchasing the Ubiquiti Networks®

NanoStation®. This Quick Start Guide is designed to guide you

through installation and also includes warranty terms.

Package Contents

NanoStation Cable Tie

High-Power2x2 MIMO

airMAX®TDMAStation

Models:NSM2/NSM3/NSM365/

NSM5/locoM2/locoM5/locoM9

PoE Adapter (24V, 0.5A)

with Mounting Bracket

Power Cord Quick Start

Guide

Installation Requirements

• Shielded Category 5 (or above) cabling should be used for

all wired Ethernet connections and should be grounded

through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial‑grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™is

designed for outdoor installations. It is the customer’s responsibility to follow local country

regulations, including operation within legal frequency channels, output power, and Dynamic

Frequency Selection (DFS) requirements.

Hardware Overview

Back View

Port Cover Release Button

Mounting

Brackets

LED Panels

NanoStationlocoM2/M5NanoStationM2/M3/M5

LED Panels

LED Panel

Power The Power LED will light green when

the device is connected to a power source.

LAN1 Main Ethernet The LED will light steady green

when an active Ethernet connection is made

to the Main/LAN port and flash when there is

activity.

LAN2

Secondary Ethernet (NanoStation M2/M3/M5

only)

The LED will light steady green when

an active Ethernet connection is made to the

Secondary port and flash when there is activity.

Signal In airOS®, you can modify the wireless

signal strength threshold values for each

LED on the Advanced tab under Signal LED

Thresholds. The default values are shown below:

LED will light red when the wireless

signal strength is above ‑94 dBm.

LED will light amber when the wireless

signal strength is above ‑80 dBm.

LED will light green when the wireless

signal strength is above ‑73 dBm.

LED will light green when the wireless

signal strength is above ‑65 dBm.

Ports

Main*

Port

Secondary

Port

Reset

Button

Main/LAN 10/100 Ethernet port used to connect the power

and should be connected to the LAN and DHCP server.

Secondary (NanoStationM2/M3/M5 only) 10/100 Ethernet

port used for bridging and supports software‑configurable

PoE passthrough.

Reset Button To reset to factory defaults, press and hold the

Reset button for more than 10 seconds while the NanoStation

is already poweredon. Alternatively, a remote reset button is

located on the bottom of the PoE Adapter.

RESET

Switching Gigabit Power Supply/ PoE

Reset

Button

* Main is labeled LAN on the NanoStationlocoM2/M5.

Hardware Installation

1. Press the Port Cover Release Button located on the back of

the NanoStation and slide the cover off.

2. Connect an Ethernet cable to the Main/LAN port.

*640-00210-03*

640-00210-03

3. Replace the port cover.

4. Position the NanoStation at the desired location on a pole

and insert a Cable Tie into the slot of the Mounting Bracket.

5. Align the front of the NanoStation toward the other end

of the wireless link. Then tighten the Cable Tie around

thepole.

Note: For the NanoStationM2/M3/M5, two Cable Ties

are provided. Fasten the second Cable Tie to the other

mounting bracket for added security.

Connecting Power over Ethernet

1. Connect the Ethernet cable from the NanoStation to the

POE port of the PoE Adapter.

2. Connect an Ethernet cable from your LAN to the LAN port

of the PoE Adapter.

3. Connect the Power Cord to the adapter’s power port.

Connect the other end of the Power Cord to a power outlet.

Mounting the PoE Adapter (Optional)

1. Remove the PoE Mounting Bracket from the adapter, place

the bracket at the desired location, and mark the two holes.

2. Pre‑drill the holes if necessary, and secure the bracket

using two fasteners (not included).

3. Align the adapter’s slots with the tabs of the PoE Mounting

Bracket, and then slide the adapterdown.

Accessing airOS

Connect to the airOS Configuration Interface.

1. Make sure that your host system is connected via Ethernet

to the NanoStation.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.20 in

the address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Select your Country and Language.

You must agree to the Terms of Use to use the product.

Click Login.

Note: For the Country setting, U.S. product versions are

restricted to a choice of Canada, Puerto Rico, or the U.S.

to ensure compliance with FCC/IC regulations.

The airOS Configuration Interface will appear, allowing you

to customize your settings as needed. For additional details

on the airOS Configuration Interface, refer to the User Guide

available at documentation.ubnt.com/airmax

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti UniFi UAP-AC-PRO Manuel utilisateur

Ubiquiti

Ubiquiti UAP-IW-HD Manuel utilisateur

Ubiquiti

Ubiquiti UAP-AC-PRO-5 Manuel utilisateur

Ubiquiti

Ubiquiti UAP-Outdoor Manuel utilisateur

Ubiquiti

Ubiquiti U-Installer Manuel utilisateur

Ubiquiti

Ubiquiti NanoBeam 5AC Gen 2 NBE-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC Lite Manuel utilisateur

Ubiquiti

Ubiquiti Power AP N 802.11n Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC SHD Manuel utilisateur

Ubiquiti

Ubiquiti UAP-IW-HD Manuel utilisateur

Ubiquiti

Ubiquiti UAP Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M2 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket 5AC PTP Manuel utilisateur

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR Manuel utilisateur

Ubiquiti

Ubiquiti BulletAC-IP67 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UBB Manuel utilisateur

Ubiquiti

Ubiquiti UF-Nano Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM365 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-Omni Manuel utilisateur

Ubiquiti

Ubiquiti Loco5AC-US Manuel utilisateur

Ubiquiti

Ubiquiti RP-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti airFiber 24 HD Manuel utilisateur

Ubiquiti

Ubiquiti UAP-AC-M-PRO Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur