Ubiquiti Loco5AC Manuel utilisateur

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

NanoStation loco Zip Tie

Package Contents

Installation Requirements

Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor

wired Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that you use

two Ethernet Surge Protectors, model ETH-SP, one near the NanoStation loco and the

other at the entry point to the building. The ETH-SP will absorb power surges and safely

discharge them into the ground.

Loco5AC Quick Start Guide

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

Diagram Showing Use of Ethernet Surge Protectors

Hardware Overview

Port View

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

Power LED

Ethernet Port

Reset Button

The Power LED will light blue when the device is connected to a power source.

10/100/1000 Ethernet port used to connect the power and should be connected to the

LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10 seconds

while the device is powered on.

Hardware Installation

1.

2.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

Pole Mount

1.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

2.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

3.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

Connecting Power

WARNING: The switch port must comply with the power specifications listed in this

“Specifications”.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

Accessing airOS via Wi-Fi

Verify connectivity in the airOS® Configuration Interface using the UNMS™ app or Web Portal.

Both are available for 15 minutes immediately after you power on the device. If necessary,

you can power cycle the device to re-enable its Wi-Fi.

UNMS App

1. Download the UNMS app.

2. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address>

3. Launch the app and follow the on-screen instructions.

Web Portal

1. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address>

Note: Ensure that DHCP is enabled on your Wi-Fi adapter.

Note: Ensure that your Wi-Fi connection has DHCP enabled.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

2. Launch your web browser and go to: http://setup.ui.com

3. Select your Country and Language. You must agree to the Terms of Use to use the

product. Click Continue.

4. Create a username and password. Confirm your new password and then click Save.

Loco5AC Quick Start Guide

https://dl.ubnt.com/qsg/Loco5AC/Loco5AC_EN.html[1/6/2020 4:15:20 PM]

The airOS Configuration Interface will appear, allowing you to customize your settings as

needed. For additional details, refer to the User Guide available at ui.com/download/airmax-

ac

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional installer’s responsibility to

make sure the device is operated within local country regulatory requirements.

Autres manuels pour Loco5AC

4

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti NanoStation5 Manuel utilisateur

Ubiquiti

Ubiquiti UAP-Outdoor-5 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UBB Manuel utilisateur

Ubiquiti

Ubiquiti UniFi WiFi BaseStationXG UWB-XG-BK Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM365 Manuel utilisateur

Ubiquiti

Ubiquiti GigaBeam GBE Manuel utilisateur

Ubiquiti

Ubiquiti BulletM2-HP Manuel utilisateur

Ubiquiti

Ubiquiti UAP Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam M Manuel utilisateur

Ubiquiti

Ubiquiti AirOS B2 Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam PBE-5AC400 Manuel utilisateur

Ubiquiti

Ubiquiti Uni-fi AP Manuel utilisateur

Ubiquiti

Ubiquiti LAP-GPS Manuel utilisateur

Ubiquiti

Ubiquiti NanoBeam M5-16 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti UAP-AC-M-PRO Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP BeaconHD Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-AC-LR-5-EU Manuel utilisateur

Ubiquiti

Ubiquiti AirCube ACB-AC Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Switch Flex Manuel utilisateur

Ubiquiti

Ubiquiti UAP-PRO Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP XG Manuel utilisateur

Ubiquiti

Ubiquiti BulletAC-IP67 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur