Ubiquiti Rocket R5AC-Lite Manuel utilisateur

5 GHz Carrier Class

airMAX®ac BaseStation

Model: R5AC-Lite

Introduction

Thank you for purchasing the Ubiquiti Networks® Rocket®5ac

Lite.This Quick Start Guide is designed to guide you through

installation and also includes warranty terms.

Package Contents

5GHz Carrier Class

airMAX®acBaseStation

Model:R5AC-Lite

Rocket5ac

Lite

Gigabit PoE Adapter

(24V, 0.5A)

Power Cord Quick Start

Guide

Installation Requirements

• Shielded Category 5 (or above) cabling should be used for

all wired Ethernet connections and should be grounded

through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial‑grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™is

designed for outdoor installations. It is the professional installer’s responsibility to follow local

country regulations, including operation within legal frequency channels, output power, and

Dynamic Frequency Selection (DFS) requirements.

Hardware Overview

RP-SMA Antenna

Connectors

Port Cover

LED Panel

Signal In airOS®, you can modify the wireless

signal strength threshold values for each LED on

the Wireless tab under Signal LED Thresholds. The

default values are shown below:

LED will light blue when the wireless signal

strength is equal to or above ‑65 dBm.

LED will light blue when the wireless signal

strength is equal to or above ‑73 dBm.

LED will light blue when the wireless signal

strength is equal to or above ‑80 dBm.

LED will light blue when the wireless signal

strength is equal to or above ‑94 dBm.

LAN LAN The main Ethernet LED will light steady blue

when an active Ethernet connection is made to

the LAN port and flash when there is activity.

Power The Power LED will light blue when the

device is connected to a power source.

Ports

LAN Port

Reset

Button

LAN This Gigabit Ethernet port is used to connect the power

and should be connected to the LAN.

Reset Button To reset to factory defaults, press and hold the

Reset button for more than 10 seconds while the device is

poweredon. Alternatively, the device may be reset remotely

via a Reset button located on the bottom of the Gigabit PoE

Adapter.

RESET

Switching Gigabit Power Supply/ PoE

Reset

Button

Hardware Installation

The Rocket5ac Lite is designed to mount directly onto a

Ubiquiti airMAX RocketDish™antenna for Point‑to‑Point use or

an airMAX Sector antenna for Point‑to‑MultiPoint use.

1. Lift the release latch on the bottom of the Rocket and slide

the Port Cover off.

2. Connect an Ethernet cable to the LAN port.

*640-00104-11*

640-00104-11

3. Replace the Port Cover.

4. Connect the RF cables (included with the antenna) to the

RP-SMA Connectors located on top of the Rocket.

5. Attach the Rocket to the antenna.

a. Align the mounting tabs on the back of the Rocket with

the four mounting slots on the antenna.

b. Slide the Rocket down until it locks into place.

Mounting on a RocketDish Mounting on a Sector Antenna

6. Attach the other end of the RF Cables to the RF connectors

on the antenna.

Connecting to a RocketDish Connecting to a Sector Antenna

7. Attach the Protective Shroud.

Align the hash mark on the top

of the shroud with the notch on

the RocketDish. Rotate the shroud

clockwise until it locks into place.

Slide the Protective Shroud

down over the Rocket until it

locks into place on the Sector

antenna.

Connecting Power over Ethernet

1. Connect the other end of the Ethernet cable from the

device to the Ethernet port labeled POE on the Gigabit

PoE Adapter.

2. Connect an Ethernet cable from your LAN to the Ethernet

port labeled LAN on the Gigabit PoE Adapter.

3. Connect the Power Cord to the power port on the Gigabit

PoE Adapter. Connect the other end of the Power Cord to a

power outlet.

Accessing airOS

Connect to the airOS Configuration Interface.

1. Make sure that your host system is connected via Ethernet

to the device.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.20 in

the address field. Press enter (PC) or return (Mac).

https://192.168.1.20

4. Enter ubnt in the Username and Password fields. Select

your Country and Language. You must agree to the Terms of

Use to use the product. Click Login.

Note:

The Country setting for U.S. product versions is

restricted to a choice of Canada, Puerto Rico, or the

U.S. to ensure compliance with FCC/IC regulations.

The airOS Configuration Interface will appear, allowing you

to customize your settings as needed. For additional details

on the airOS Configuration Interface, refer to the User Guide

available at www.ubnt.com/download/airmax

You can also manage your device using the Ubiquiti Network

Management System. Setup using the UNMS™app requires

the U‑Installer, sold separately.

Autres manuels pour Rocket R5AC-Lite

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti NanoBeam M5-16 Manuel utilisateur

Ubiquiti

Ubiquiti GigaBeam GBE Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M Series Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP Manuel utilisateur

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR Manuel utilisateur

Ubiquiti

Ubiquiti AirOS B2 Manuel utilisateur

Ubiquiti

Ubiquiti airGateway-LR Manuel utilisateur

Ubiquiti

Ubiquiti airCube ISP Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Manuel utilisateur

Ubiquiti

Ubiquiti BulletM2-HP Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti Power AP N 802.11n Manuel utilisateur

Ubiquiti

Ubiquiti UniFi HD nano UAP-HD-NANO Manuel utilisateur

Ubiquiti

Ubiquiti M2 GPS Rocket M Series Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC Lite Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Manuel utilisateur

Ubiquiti

Ubiquiti UF-Nano Manuel utilisateur

Ubiquiti

Ubiquiti UniFi nanoHD Manuel utilisateur

Ubiquiti

Ubiquiti LTU-Lite Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti NanoBridge M5 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC SHD Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur