Ubiquiti UCK-G2-PLUS Manuel utilisateur

Model: UCK-G2-PLUS

Table of Contents

Introduction 3

Hardware Overview 5

Hardware Installation 10

Powering the Cloud Key Gen2 Plus 11

Optional Rackmount Accessory 12

Setting Up UniFi SDN via App 14

Pre-installed Software 19

Setting Up UniFi Protect via App 20

Chrome Instructions 26

Setting Up UniFi SDN 27

Setting Up UniFi Protect 31

Cloud Key G2+ Settings 36

HDD Replacement 38

Specifications 40

Safety Notices 41

Electrical Safety Information 41

Limited Warranty 41

Compliance 44

Declaration of Conformity 48

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® Cloud

Key Gen2 Plus. This Quick Start Guide is designed to guide you

through installation and also includes warrantyterms.

Package Contents

UniFi Cloud Key Gen2 Plus

System Requirement

Web Browser: Google Chrome (Other browsers may have

limited functionality.)

installer’s responsibility to follow local country regulations, including operation within legal

frequency channels, output power, indoor cabling requirements, and Dynamic Frequency

Selection (DFS) requirements.

Network Topology

A DHCP-enabled network (for the Cloud Key Gen 2 Plus to

obtain an IP address)

UniFi PoE Switch

UniFi Security Gateway

(DHCP Server)

Internet

LAN

WAN

UniFi Cloud Key Gen2 Plus

Sample Network Diagram

Hardware Overview

Front Panel LED

LED

Color State Status

White Solid Device is ready to be configured

Flashing Device is booting up

Device is initializing/deinitializing

Heartbeat Firmware update in process

Blue Solid Device is configured and ready

Flashing Main power has been lost and

device is counting down.

If power is restored within 10

seconds, the device will return to

its previous state. If power is not

restored within 10 seconds, the

device will safely shutdown.

Slow

Flashing

Client connected to device via

Bluetooth (BLE)

Off/White/

Blue

Flashing Device is in recovery mode.

The LED will cycle through a

pattern at one-second intervals,

between off, white, and blue.

Front Panel

LCD

Screen

HDD

Bay

HDD Bay Location of the 2.5" SATA hard disk drive

LCD Screen Displays device status information and will vary

based on the application currently in use

Last Moon

UniFi SDN Display UniFi Protect Display

LCD Display for UniFi SDN

Icon Description

UniFi SDN Controller name and bandwidth

Status of Cloud Access

Number of managed UniFi Access Points

Number of client devices on the network

LCD Display for UniFi Protect

Icon Description

UniFi Protect Controller name and bandwidth

Status of Cloud Access

Number of active cameras registered in UniFi Protect

Time of last motion detected by UniFi Protect

Back Panel

microSD

Slot

Reset

Button

USB Type C

Port

Ethernet

Port

Power

Button

USB Type C

Power Port

Reset The Reset button serves two functions:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds, until the status LED

begins flashing white.

Power Button

Press to turn the Cloud Key Gen 2 Plus on or off.

USB Type C Power Port Used for power if PoE is not available.

Quick Charge 2.0 or Quick Charge 3.0 compliance is required.

microSD Slot Used for external backup (microSD card not

included).

Ethernet Port Connects to a gigabit switch port on your LAN.

Power can be provided by an 802.3af PoE switch, such as the

UniFi PoE Switch.

USB Type C Port Reserved for future use.

Side Panels

Rack-Mount

Notch

Security

Slot

Rack-Mount

Notch

Security Slot Allows the Cloud Key Gen 2 Plus to be used with

a Kensington security lock (not included). When used, it also

prevents removal of the HDD while the device is in use.

Rack-Mount Notch

Secures the Cloud Key Gen2 Plus into

the docking bay of the optional Rackmount Accessory, model

CKG2-RM (sold separately). The Rackmount Accessory

allows

you to install the Cloud Key Gen2 Plus in a standard 19" rack.

Note: The Rackmount Accessory is completely optional

and not required for the Cloud Key Gen2 Plus to function.

Bottom Panel

HDD Latch

13-Pin Connector

Connects the Cloud Key Gen2 Plus to the

optional Rackmount Accessory, model CKG2-RM (sold separately).

The CKG2-RM has a docking bay for the Cloud Key Gen2 Plus and

allows you to install it in a standard 19" rack.

Note: Out of the box, the 13-Pin Connector is covered

with a black sticker to protect it from dust and dirt. Only

remove the sticker if using the Cloud Key Gen2 Plus with

the optional Rackmount Accessory.

HDD Latch Releases the HDD tray from the drive bay.

WARNING: Do not operate the HDD Latch while the

Cloud Key Gen2 Plus is in use or powered on.

Hardware Installation

1. Connect an Ethernet cable (not included) to the

Ethernet Port.

2. Connect the other end of the Ethernet cable to a port on a

network switch, such as a UniFi PoE Switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

Table des matières

Autres manuels Ubiquiti Routeur réseau

Ubiquiti

Ubiquiti UFber loco Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter LITE Manuel utilisateur

Ubiquiti

Ubiquiti ER-4 Instructions d'utilisation et d'entretien

Ubiquiti

Ubiquiti AmpliFi AFi-G Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter X ER-X Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti Amplifi AFi-LR Manuel utilisateur

Ubiquiti

Ubiquiti LiteStation2 Manuel utilisateur

Ubiquiti

Ubiquiti Bullet Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter 4 Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti EdgePoint R8 Manuel de l'opérateur

Ubiquiti

Ubiquiti edgerouter X SFP Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ERPro-8 Manuel utilisateur

Ubiquiti

Ubiquiti 3GStation Professional Manuel utilisateur

Ubiquiti

Ubiquiti ToughSwitch Pro TS-80-PRO Manuel utilisateur

Ubiquiti

Ubiquiti ER-8-XG Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuel utilisateur

Ubiquiti

Ubiquiti UF-LOCO Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ER-12P Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter LITE Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ER-10X Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité