Ubiquiti PowerBridge M3 Manuel utilisateur

Carrier Class

AirMax BaseStation

Models: M3/M365/M5

Introduction

Thank you for purchasing a PowerBridge M series product. This is

a point-to-point CPE wireless device. This Quick Start Guide is for

use with the following models:

Model Operating Frequency

PowerBridge M3 3300 MHz-3700 MHz

PowerBridge M365 3650 MHz-3675 MHz

PowerBridge M5 5170-5875 MHz*

* Only 5745-5850 MHz is supported in the USA and Canada

Package Contents

PowerBridge 24V PoE

Adapter

Power Cord Antenna Bracket

Clamps (Qty. 2)

Carrier Class

AirMax BaseStation

Models: M3/M365/M5

Pole Bracket

Clamps (Qty. 2)

Serrated

Flange Bolts

(Qty. 4)

Serrated Flange

Lock Nuts

(Qty. 4)

M8X135

Carriage Bolts

(Qty. 4)

Quick

Start

Guide

Installation Requirements

• Adjustable wrench or one 16 mm and one 24 mm wrench

• Flathead screwdriver

• Shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through

the AC ground of the PoE.

We recommend that you protect your networks from the

most brutal environments and devastating ESD attacks

with industrial-grade shielded Ethernet cable from Ubiquiti

Networks. For more details, visit www.ubnt.com/toughcable

PowerBridge

Hardware Installation

To install the PowerBridge, perform the following steps:

1. Use a flathead screwdriver to unlock the PowerBridge case.

Turn the screw counter-clockwise until it is loose. The screw

remains attached to the compartment.

Complia nt

RoHS

2. Lift the cover on the PowerBridge by pressing down and raising

it up. Connect an Ethernet cable. There is an opening for the

Ethernet cable. Slide the cover over the cable and secure it with

the screw.

Hardware Installation

3. Insert the M8X135 Carriage Bolts into the Antenna Bracket

Clamps.

4. Connect the Antenna Bracket Clamps to the PowerBridge using

the four Serrated Flange Bolts.

Compliant

RoHS

PowerBridge

5. Mount the PowerBridge to the pole by performing the

following steps:

a. Position the PowerBridge in the desired mounting location

on the pole.

b. Slide the Pole Bracket Clamps on to the Carriage Bolts.

c. Use the four Serrated Flange Lock Nuts to secure the

PowerBridge to the pole.

Compliant

RoHS

Hardware Installation

6. Adjust the operating angle of the PowerBridge by adjusting the

Serrated Flange Bolts on the top Antenna Bracket Clamp.

Compliant

RoHS

PowerBridge

7. Connect the other end of the Ethernet cable from the

PowerBridge to the Ethernet port labeled POE on the PoE

Adapter.

Compliant

RoHS

Hardware Installation

8. Connect an Ethernet cable from your LAN to the Ethernet port

labeled LAN on the PoE Adapter.

9. Connect the power cord to the power port on the PoE Adapter.

Connect the other end of the power cord to a power outlet.

PowerBridge

Accessing the AirOS Utility

1. Make sure that your host machine is connected to the LAN that

is connected to the PowerBridge.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet (e.g. 192.168.1.100).

3. Launch your Web browser and type http://192.168.1.20 in the

address field and press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username and

Password fields. Select your Country and Language. You must

agree to the Terms of Use to use the product. Click Login.

Note: U.S. product versions are locked to the U.S. Country

Code to ensure compliance with FCC regulations.

The AirOS Interface will appear allowing you to customize your

settings as needed.

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional

installer's responsibility to make sure the device is operated within

local country regulatory requirements.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ubiquiti Routeur réseau

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manuel utilisateur

Ubiquiti

Ubiquiti EdgePoint R8 Manuel de l'opérateur

Ubiquiti

Ubiquiti UCK-G2-PLUS Manuel utilisateur

Ubiquiti

Ubiquiti UniFi US-24-250W Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti UFber UF-WIFI Manuel utilisateur

Ubiquiti

Ubiquiti TS-8-PRO Manuel utilisateur

Ubiquiti

Ubiquiti edgerouter X SFP Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP PRO Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ERPro-8 Manuel utilisateur

Ubiquiti

Ubiquiti EdgePoint EP-R8 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter 4 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter 12 Manuel utilisateur

Ubiquiti

Ubiquiti ER-8-XG Manuel utilisateur

Ubiquiti

Ubiquiti UniFi USG Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter PRO Manuel utilisateur

Ubiquiti

Ubiquiti LTU LR Manuel utilisateur

Ubiquiti

Ubiquiti ER-12 Manuel utilisateur

Ubiquiti

Ubiquiti edgepoint r6 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter X ER-X-SFP Manuel utilisateur

Ubiquiti

Ubiquiti UF-LOCO Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter 10X Manuel utilisateur

Ubiquiti

Ubiquiti UFiber UF-WIFI Manuel d'instructions

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité