Tripp Lite EN1511N4LATCH Manuel utilisateur

Installation Guide

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Español 7 • Français 13 • Русский 19

NEMA-4 Plastic Wi-Fi Access

Point Enclosure

Model: EN1511N4LATCH

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

Components List

Installation

IMPORTANT:

Ensure you have received all parts according to the component checklist prior to installing. If any parts are

missing or faulty, visit www.tripplite.com/support for service.

x2 x2

x4 x4 x1

1. Attach Mounting Feet to the Rear of the Enclosure

Installation

• Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws

(not included) to secure the enclosure in place.

• Make sure mounting screws are anchored into the center of the studs. Use of a stud ﬁnder is highly recommended.

• If there is no stud at the mounting location, it is recommended you use four anchors to secure the enclosure in place.

Due to the weight of the enclosure, plastic expansion wall anchors are not recommended for drywall installations.

Suitable anchors include: threaded drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors

(a.k.a. molly bolts) or toggle bolts.

• If placing the enclosure over a telecommunications receptacle, remove the wall plate, then fasten the enclosure to the

wall. Once secured, fasten the wall plate over the receptacle.

• If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be

mounted inside the unit.

• Use an adhesive-backed surface mount box.

2. Mount Enclosure to Wall

Mark the exact

location of the

mounting holes

Attach the

enclosure onto

the wall

Drill pilot holes

Find a wood stud

location for mounting

the enclosure

(Mounting Hardware

Not Included)

Installation

3. Use a Drill to Create a Rear or

Side Conduit Cutout

4. Run Data and Power Cable (If

Required) Through the Conduit

Cutout

Note: To maintain a NEMA

rating, use sealed ﬁttings in

the cutouts when connecting

to conduit.

Installation

5. Using the Provided Screws, Attach the Access Point

5a. Cisco Universal Bracket

(AIR-AP-BRACKET-2)*

Installation

5b. Aruba or Other T-Bar Mounted

Access Point Installation

IMPORTANT:

Attach all data and power cables to the access point prior to attaching to the enclosure.

AIR-AP-BRACKET-2

Security Tab

Access Point

Security Tab Zip Tie

(Included)

* Cisco brackets not included.

Installation

Warranty and Product Registration

6. Secure the Enclosure Cover

Note: For an added level of

security, attach a padlock or

tamper seal to the security hole

next to the enclosure latch.

5-year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and

workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within

that period, Seller will repair or replace the product, in its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER

MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION

TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL

DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you

speciﬁc legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use

intended. Since individual applications are subject to great variation , the manufacturer makes no representation or warranty as to the

suitability or ﬁtness of these devices for any speciﬁc application.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to

win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ

slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

19-08-129 93-37F8_RevB

Guía de Instalación

1111 W. 35th Street, Chicago, IL 60609, EE. UU. • www.tripplite.com/support

English 1 • Français 13 • Русский 19

Gabinete de Plástico NEMA-4

para Punto de Acceso Wi-Fi

Modelo: EN1511N4LATCH

Lista de Componentes

Instalación

IMPORTANTE:

Antes de proceder a instalar, asegúrese de haber recibido todas las piezas de acuerdo con la lista de

comprobación de componentes. Si faltase cualquier parte o estuviese dañada, visite www.tripplite.com/support

para solicitar servicio.

x2 x2

x4 x4 x1

1. Acople Patas de Instalación a la Parte Posterior del Gabinete

Instalación

• Los instaladores son responsables de suministrar los accesorios para instalación en la pared. Use como mínimo dos

tornillos #10 x 2” o más grandes (no incluidos) para ﬁjar el gabinete en su lugar.

• Cerciórese que los tornillos de instalación estén anclados en el centro de los travesaños. Es muy recomendable usar un

detector de vigas.

• Si no hay algún travesaño en el lugar de instalación, se le recomienda utilizar cuatro taquetes para ﬁjar el gabinete

en su lugar. Debido al peso del gabinete, no se recomiendan taquetes de expansión de plástico para instalaciones en

tablarroca. Los taquetes adecuados incluyen: taquetes roscados para tablarroca, tornillos roscados tipo mariposa para

tablarroca, taquetes expansivos (también conocidos como tornillos molly) o tornillos de anclaje.

• Si coloca el gabinete sobre un receptáculo de telecomunicaciones, retire la placa de pared, luego ﬁje el gabinete a la

pared. Una vez asegurado, ﬁje la placa de pared sobre el receptáculo.

• Si no está disponible un receptáculo de telecomunicaciones, una caja de instalación sobre superﬁcie (o conector sobre

superﬁcie) y un cable de equipo pueden ser instalados dentro de la unidad.

• Use una caja de instalación sobre superﬁcie con respaldo adhesivo.

2. Instalación del Gabinete a la Pared

Marque la posición

exacta de los oriﬁcios

de instalación

Coloque el

gabinete sobre

la pared

Barrene los oriﬁcios piloto

Localice un punto en el

travesaño de madera para la

instalación del gabinete

(No Incluye

Accesorios de

Instalación)

Instalación

3. Utilice un Taladro para Hacer

un Recorte para Conducto

Posterior o Lateral

4. Conduzca el Cable de Datos y

Alimentación (Si se Requiere)

A Través del Recorte para el

Conducto

Nota: Para mantener una

especiﬁcación NEMA, utilice

accesorios sellados en

los recortes al conectar a

conductos.

Table des matières

Langues :

Autres manuels Tripp Lite Enceinte

Tripp Lite

Tripp Lite SmartRack SRWF2U Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SR42UBEIS Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRW9UDPVRT Manuel utilisateur

Tripp Lite

Tripp Lite BP240V09 Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack AG-0534 Manuel utilisateur

Tripp Lite

Tripp Lite SREXTENDER Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRW12US Manuel utilisateur

Tripp Lite

Tripp Lite U339-001-FLAT Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRX47UBEXP Series Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SR25UBEXP Manuel utilisateur

Tripp Lite

Tripp Lite N484-00U Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack Manuel utilisateur

Tripp Lite

Tripp Lite SR45UBWD Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SR25UB Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRW9U Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SR12UBFFD Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SR18UB Manuel utilisateur

Tripp Lite

Tripp Lite SRIN410106 Manuel utilisateur

Tripp Lite

Tripp Lite SRFANROOF Manuel utilisateur

Tripp Lite

Tripp Lite BP480V40 Manuel utilisateur

Tripp Lite

Tripp Lite SRW12US33 Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRW6U Manuel utilisateur

Tripp Lite

Tripp Lite SmartRack SRW18US13 Manuel utilisateur

Tripp Lite

Tripp Lite U457-1M2-SATAG2 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur