TRENDnet TEG-S80TX Manuel utilisateur

TEG-S80TX

8-Port 10/100/1000Mbps

Copper Gigabit Ethernet Switch

User’s Guide

FCC Warning

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with this user’s guide,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the user

may be required to take adequate measures.

VCCI Warning

P/N:6012-8000T01

Rev.A1-01

TABLE OF CONTENTS

ABOUT THIS GUIDE...........................................................................1

TERMS................................................................................................1

OVERVIEW OF THIS USER’S GUIDE........................................................1

INTRODUCTION.................................................................................3

GIGABIT ETHERNET TECHNOLOGY......................................................3

SWITCHING TECHNOLOGY ..................................................................4

FEATURES...........................................................................................5

UNPACKING AND SETUP..................................................................7

UNPACKING........................................................................................7

SETUP .................................................................................................7

DESKTOP OR SHELF INSTALLATION .....................................................8

RACK INSTALLATION ..........................................................................9

IDENTIFYING EXTERNAL COMPONENTS .....................................11

FRONT PANEL...................................................................................11

REAR PANEL.....................................................................................12

LED INDICATORS..............................................................................12

TECHNICAL SPECIFICATIONS......................................................15

ABOUT THIS GUIDE

This user’s guide tells you how to install your 8-Port

10/100/1000Mbps Gigabit Ethernet Switch and how to connect

it to your Ethernet network.

Terms

For simplicity, this documentation uses the terms “Switch” (first

letter upper case) to refer to the 8-Port 10/100/1000Mbps Gigabit

Ethernet Switch, and “switch” (first letter lower case) to refer to

all Ethernet switches, including the 8-Port 10/100/1000Mbps

Gigabit Ethernet Switch.

Overview of this User’s Guide

? ?Introduction. Describes the Switch and its features.

? ?Unpacking and Setup. Helps you get started with the basic

installation.

? ?Identifying External Components. Describes the front

panel, rear panel, and LED indicators.

? ?Technical Specifications. Lists the technical specifications.

INTRODUCTION

This section describes the features of the 8-Port

10/100/1000Mbps Gigabit Ethernet Switch, as well as giving

some background information about Gigabit Ethernet and

switching technology.

Gigabit Ethernet Technology

Gigabit Ethernet is an extension of IEEE 802.3 Ethernet, utilizing

the same packet structure, format, and support for CSMA/CD

protocol, full duplex, flow control, and management objects, but

with a tenfold increasein theoretical throughput over 100-Mbps

Fast Ethernet and a hundredfold increase over 10-Mbps

Ethernet. Since it is compatible with 10-Mbps and 100-Mbps

Ethernet environments, Gigabit Ethernet provides a

straightforward upgrade without wasting a company’s existing

investment in hardware, software, and trained personnel.

The increased speed and extra bandwidth offered by Gigabit

Ethernet is essential when coping with the network bottlenecks

that frequently develop as computers and their busses get

faster and more users use applications that generate more

traffic. Upgrading key components, such as your backbone and

servers to Gigabit Ethernet can greatly improve network

response times as well as significantly speed up the traffic

between your subnets.

Since the Gigabit Ethernet data transfer rate is 10 times faster

than Fast Ethernet, servers equipped with Gigabit Ethernet

NIC’s are able to perform 10 times the number of operations in

the same amount of time. This makes Gigabit Ethernet the

perfect solution for video conferencing, complex imaging, and

similar data-intensive applications.

Switching Technology

Another key development pushing the limits of Ethernet

technology is in the field of switching technology. A switch

bridges Ethernet packets at the MAC address level of the

Ethernet protocol, transmitting among connected Ethernet or

Fast Ethernet LAN segments.

Switching is a cost-effective way of increasing the total network

capacity available to users on a local area network. A switch

increases capacity and decreases network loading by dividing

network into different segments and each segment has its own

bandwidth (10, 100, or 1000Mbps).

The switch acts as a high-speed selective bridge between the

individual segments. Traffic that needs to go from one segment

to another is automatically forwarded by the switch (without

interfering with any other segments). This allows the total

network capacity to be multiplied, while maintaining the same

network cabling and adapter cards.

Autres manuels pour TEG-S80TX

Table des matières

Autres manuels TRENDnet Changer

TRENDnet

TRENDnet TPE-S44 - Switch Manuel utilisateur

TRENDnet

TRENDnet TPE-1020WS Manuel utilisateur

TRENDnet

TRENDnet TK-1603R Manuel utilisateur

TRENDnet

TRENDnet TEG-S18TXE Manuel utilisateur

TRENDnet

TRENDnet TL2-G244 Manuel utilisateur

TRENDnet

TRENDnet TU-400E Manuel utilisateur

TRENDnet

TRENDnet TPE-TG160H Manuel utilisateur

TRENDnet

TRENDnet TK-204K Manuel utilisateur

TRENDnet

TRENDnet TEG-S224 - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TK-802R Manuel utilisateur

TRENDnet

TRENDnet TEG-S2600I - 10/100Mbps Switch With Mini-GBIC... Manuel utilisateur

TRENDnet

TRENDnet TU3-H4E Manuel utilisateur

TRENDnet

TRENDnet TE100-DX4PCI Manuel utilisateur

TRENDnet

TRENDnet TE-SK1 Manuel utilisateur

TRENDnet

TRENDnet TEG-S80Dg Manuel utilisateur

TRENDnet

TRENDnet TK-1601R Manuel utilisateur

TRENDnet

TRENDnet TE100-S24g Manuel utilisateur

TRENDnet

TRENDnet TK-803R Manuel utilisateur

TRENDnet

TRENDnet TPE-224WS - Web Smart PoE Switch Manuel utilisateur

TRENDnet

TRENDnet TK-401R Manuel utilisateur

TRENDnet

TRENDnet TE100-DX16 Manuel utilisateur

TRENDnet

TRENDnet TK-423K - USB/PS/2 KVM Switch Manuel utilisateur

TRENDnet

TRENDnet TE100-S24plus Manuel utilisateur

TRENDnet

TRENDnet TE100-S800i Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur