TRENDnet TEW-USB Manuel utilisateur

USB Wireless Network

Adapter

User’s Manual

Rev 1.1

USB Wireless Network Adapter User’s Manual

Regulatory compliance

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

ŸReorient or relocate the receiving antenna.

ŸIncrease the separation between the equipment and receiver.

ŸConnect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

ŸConsult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

USB Wireless Network Adapter User’s Manual

About this manual

This User’s Manual describes how to install and operate your USB Wireless

Network Adapter. Please read this manual before you install the product.

This manual includes the following topics:

ØProduct description and features.

ØHardware installation procedure.

ØSoftware installation procedure.

ØFAQ

USB Wireless Network Adapter User’s Manual

Table of Contents

Regulatory compliance

About this manual

Chapter 1- Introduction 6

Features 6

What is Wireless LAN? 7

Wireless LAN Modes 7

Notes on Wireless LAN Configuration 8

Chapter 2 - Hardware Installation 9

Package Contents 9

System Requirements for the Adapter 9

Connecting the USB Adapter 9

LEDs Indicators 10

Disconnecting the USB Adapter 11

Chapter 3 - Installation Procedures

Under Windows 98 12

What You Will Need 12

Installing the Driver Under Windows 98 12

Uninstall Procedure Under Windows 98 15

Chapter 4 - Installation Procedures

Under Windows 2000 16

What You Will Need 16

Installing the Driver Under Windows 2000 16

How to Unplug the Device Under Windows 2000 20

Uninstall Procedure Under Windows 2000 21

Chapter 5 - Installation Procedures

Under Windows ME 22

What You Will Need 22

Installing the Driver Under Windows ME 22

Uninstall Procedure Under Windows ME 24

Chapter 6 - Install and Use Configuration Utility 25

How to Install the Configuration Utility 25

Using the Configuration Utility 27

Appendix A –FAQ 33

Appendix B –Specifications 35

USB Wireless Network Adapter User’s Manual

Chapter 1 - Introduction

Thank you for purchasing the USB Wireless Network Adapter. This high-speed

USB Wireless Network Adapter provides you with an innovative wireless

networking solution. The Adapter is easy to set up and use. With this innovative

wireless technology, you can share files and printers on the network—without

inconvenient wires! Now you can carry the LAN in your pocket!

The Adapter is a network adapter with a rate of 1, 2, 5.5, and 11 Mbps operating

in the ISM band using Direct Sequence Spread Spectrum (DSSS) transmission

implementing the IEEE 802.11b standard. This adapter provides Device Drivers

for Windows 98, Windows 2000 and Windows ME. It also provides tools for the

configuration of the adapter. The tool, as well as the installation steps of the

plug-and-play procedure for the Microsoft Windows 98, Windows ME and

Windows 2000 operating systems, is described in this document.

Features

The USB Wireless Network Adapter offerscompliance with the IEEE 802.11b

specification. This feature allows them to communicate with other wireless

devices that support the standard. Features of the adapter are:

lUses 2.4GHz frequency band, which complies with worldwide

requirement

lWireless interface following the IEEE 802.11b standard

lUsing Universal Serial Bus (USB) interface

lEnciphering/deciphering of wireless data by the implementation of the

WEP algorithm

lWire-free access to networked resources from anywhere beyond the

desktop

lAllows users move between Access Points without resetting their

connection reconfiguration

lDelivers data rate up to 11 Mbps

lSupports 11, 5.5, 2, and 1 Mbps rates

lProvide USB Wireless Network Adapter Configuration utility

lAntenna is built in to the Adapter with LEDs indicating Power and Link

lSupports most popular operating systems: Window 98/2000 &

Windows ME

USB Wireless Network Adapter User’s Manual

What is Wireless LAN?

Wireless Local Area Network (WLAN) systems offer a great number of

advantages over traditional wired systems. WLAN is flexible and easy to setup

and manage. They are also more economical than wired LAN systems.

Using radio frequency (RF) technology, WLAN transmit and receive data

through the air. WLAN combine data connectivity with user mobility. For example,

users can roam from a conference room to their office without being

disconnected from the LAN.

Using WLAN, users can conveniently access-shared information, and network

administrators can configure and augment networks without installing or moving

network cables.

WLAN technology provides users with many convenient and cost saving

features:

•Mobility: WLAN provide LAN users with access to real-time information

anywhere in their organization, providing service opportunities that are

impossible with wired networks.

•Ease of Installation: Installing is easy for novice and expert users alike,

eliminating the need to install network cables in walls and ceilings.

•Scalability: WLAN can be configured in a variety of topologies to adapt to

specific applications and installations. Configurations are easily changed

and range from peer-to-peer networks suitable for a small number of users

to full infrastructure networks of thousands of users roaming over a broad

area.

Wireless LAN Modes

Wireless LANs can be configured in one of two ways:

Ad-hoc

Networking Also known as a peer-to-peer network, an ad-hoc

network is one that allows all workstations and

computers in the network to act as servers to all other

users on the network. Users on the network can share

files, print to a shared printer, and access the Internet

with a shared modem. However, with ad-hoc

networking, users can only communicate with other

wireless LAN computers that are in the wireless LAN

workgroup, and are within range.

Infrastructure

Networking Infrastructure networking differs from ad-hoc networking

in that it includes an access point. Unlike the ad-hoc

structure where users on the LAN contend the shared

bandwidth, on an infrastructure network the access

USB Wireless Network Adapter User’s Manual

point can manage the bandwidth to maximize

bandwidth utilization.

Additionally, the access point enables users on a

wireless LAN to access an existing wired network,

allowing wireless users to take advantage of the wired

networks resources, such as Internet, email, file

transfer, and printer sharing.

Infrastructure networking has the following advantages

over ad-hoc networking:

•Extended range: each wireless LAN computer

within the range of the access point can

communicate with other wireless LAN computers

within range of the access point.

•Roaming: the access point enables a wireless LAN

computer to move through a building and still be

connected to the LAN.

•Wired to wireless LAN connectivity: the access

point bridges the gap between wireless LANs and

their wired counterparts.

Notes on Wireless LAN Configuration

When configuring a wireless LAN (WLAN), be sure to note the following points:

•Optimize the performance of the WLAN by ensuring that the distance

between access points is not too far. In most buildings, WLAN cards

operate within a range of 100 ~ 300 feet, depending on the thickness and

structure of the walls.

•Radio waves can pass through walls and glass but not metal. If there is

interference in transmitting through a wall, it may be that the wall has

reinforcing metal in its structure. Install another access point to circumvent

this problem.

•Floors usually have metal girders and metal reinforcing struts that interfere

with WLAN transmission.

This concludes the first chapter. The next chapter deals with the hardware

installation of the Adapter.

USB Wireless Network Adapter User’s Manual

Chapter 2 - Hardware Installation

This chapter covers connecting your USB Wireless Network Adapter to USB

port of desktop / notebook PC.

Package Contents

Please make sure that items below are included on package.

üOne USB Wireless Network Adapter

üOne USB cables

üOne Driver / Utility CD-ROM (this use’s manual included)

üOne Quick Installation Guide

System Requirements for the Adapter

ØOperating System: MS Windows 98, Windows 2000, Windows ME

ØDesktop PC or notebook PC with CD-ROM drive

ØOne free USB port

ØPentium-Class 90MHz or higher

Connecting the USB Adapter

NOTE: These instructions apply to most desktop/notebook computers. For

detailed information on inserting USB adaptersinto your desktop/notebook PC,

consult the desktop/notebook PC User’s Manual.

The Adapter’s USB port is located on the back of the Adapter.

And your Adapter comes with a USB cable that has two different types of

connectors –type A & type B. Type A connector of the USB cable plugs into

your notebook/desktop PC’s USB port. And type B connector of the USB cable

connects to the USB port of your USB Wireless Network Adapter.

USB Wireless Network Adapter User’s Manual

USB Type A USB Type B

LED Indicators

POWER LINK

The following table describes the meaning of LED indicators:

LED MEANING

POWERIndicates that the Adapter is powered on when the LED

lights up.

LINK Indicates link status. The LED lights up while the wireless

connection is linked. If the light is blinking, it means there is

data sending or receiving via wireless.

Autres manuels pour TEW-USB

Table des matières

Autres manuels TRENDnet Carte réseau

TRENDnet

TRENDnet TE100-PCBUS Manuel utilisateur

TRENDnet

TRENDnet TEW-202CF Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIWA Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX2 Manuel utilisateur

TRENDnet

TRENDnet TEW-403PIplus Manuel utilisateur

TRENDnet

TRENDnet TPL-410APK Manuel utilisateur

TRENDnet

TRENDnet TE100-PCBUSR - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIWA Manuel utilisateur

TRENDnet

TRENDnet TEW-PC16 Manuel utilisateur

TRENDnet

TRENDnet TEW-642EC Manuel utilisateur

TRENDnet

TRENDnet TEW-226PC Manuel utilisateur

TRENDnet

TRENDnet TEW-601PC - SUPER G MIMO WRLS PC CARD Manuel utilisateur

TRENDnet

TRENDnet TEW-603PI Manuel utilisateur

TRENDnet

TRENDnet TE-CF100 Manuel utilisateur

TRENDnet

TRENDnet TEG-PCISX Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIWS Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur

TRENDnet

TRENDnet TEW-647GA Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIA Manuel utilisateur

TRENDnet

TRENDnet WN8020A Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur

TRENDnet

TRENDnet TE100-S4PCI Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur

Gigafast

Gigafast EE101-AEX Manuel utilisateur

D-Link

D-Link DHP?P309AV Manuel utilisateur